How far is Gloversville, NY from Ramapo, NY?

The driving distance from Gloversville, NY to Ramapo, NY is about 160.9 miles (258.9 km), with a travel time of about 02h 43m by car.

  • The straight-line flight distance is about 132.4 miles (213.1 km).
  • For a round trip, plan for roughly 05h 26m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
160.88 mi
02h 43m
Flight
132.39 mi
213.06 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Gloversville.

Flight Distance

Direct air line
132.39 mi
Kilometers
213.06 km
Flight Time
00h 15m

Driving Distance

Road route
160.88 mi
Kilometers
258.91 km
Drive Time
02h 43m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 43m.

Arrival Snapshot
Arrive in Ramapo
Sat, Apr 18, 12:17 AM EDT
Return by in Gloversville
Sat, Apr 18, 3:00 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Gloversville
2026-04-17T21:34
Arrive Ramapo
Sat, Apr 18, 12:17 AM EDT
Route Timing
02h 43m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:43 AM to 12:43 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
1:04 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Gloversville
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Germantown
NY

Town in Columbia County, New York, United States

From Gloversville
79.7 mi
01h 21m
To Ramapo
81.2 mi
01h 21m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
68°F
Friday

Chance Showers And Thunderstorms

Starts
Fri, Apr 17 6:00 AM EDT
Wind
2 to 6 mph W
Destination
77°F
Friday

Chance Rain Showers

Starts
Fri, Apr 17 6:00 AM EDT
Wind
7 mph W

Driving Route Map

The map below follows the saved road route between Gloversville and Ramapo.

Turn-by-Turn Driving Directions

Step-by-step road directions between Gloversville and Ramapo.

  1. 1

    Start on North Main Street

    81 m · 15 sec · North Main Street

  2. 2

    Turn left onto Fremont Street

    1063 ft · 41 sec · Fremont Street

  3. 3

    Turn right onto Washington Street

    56 m · 11 sec · Washington Street

  4. 4

    Turn left onto Carpenter Street

    770 ft · 24 sec · Carpenter Street

  5. 5

    Continue on Park Street

    2908 ft · 1 min · Park Street

  6. 6

    Turn right onto South Kingsboro Avenue

    2733 ft · 1 min · South Kingsboro Avenue

  7. 7

    Enter the roundabout and take exit 3 toward LaPorta Circle

    61 m · 11 sec · Hales Mills Road Extension

  8. 8

    Exit the rotary onto Hales Mills Road Extension

    1.2 mi · 2 min · Hales Mills Road Extension

  9. 9

    At the end of the road, turn left onto State Highway 29

    1294 ft · 24 sec · State Highway 29

  10. 10

    Turn right onto Hales Mills Road

    1.1 km · 57 sec · Hales Mills Road

  11. 11

    Turn left onto Perth-Johnstown Road

    872 ft · 14 sec · Perth-Johnstown Road

  12. 12

    Turn slight right onto Benedict Corners Road

    2.6 mi · 4 min · Benedict Corners Road

  13. 13

    Continue on Bendick Corners Road

    2041 ft · 41 sec · Bendick Corners Road

  14. 14

    Turn left onto State Highway 67

    2.5 mi · 4 min · State Highway 67

  15. 15

    Continue on Fort Johnson Avenue

    1.3 km · 2 min · Fort Johnson Avenue

  16. 16

    At the end of the road, turn left onto Mohawk Turnpike

    1.5 km · 2 min · Mohawk Turnpike

  17. 17

    Continue on West Main Street

    1.5 km · 2 min · West Main Street

  18. 18

    Continue on Mohawk Turnpike

    1.2 km · 1 min · Mohawk Turnpike

  19. 19

    Turn slight left onto NY 30

    1256 ft · 37 sec

  20. 20

    Turn straight

    1.3 km · 2 min

  21. 21

    Turn left

    121 m · 12 sec

  22. 22

    Continue straight

    525 ft · 14 sec

  23. 23

    Keep slight left to continue on I 90 East

    1 km · 1 min

  24. 24

    Merge slight left onto New York State Thruway

    24.6 mi · 28 min · New York State Thruway

  25. 25

    Keep slight right to continue on New York State Thruway

    117.6 mi · 2 hr 16 min · New York State Thruway

  26. 26

    Take the exit slight right toward NY 17 North, NY 59: Sloatsburg, Suffern

    1114 ft · 36 sec

  27. 27

    Turn right onto Old Route 17

    1607 ft · 36 sec · Old Route 17

  28. 28

    Turn right onto Orange Turnpike

    2876 ft · 55 sec · Orange Turnpike

  29. 29

    Turn left onto Torne Valley Road

    1.1 mi · 3 min · Torne Valley Road

  30. 30

    Turn left onto Torne Brook Road

    2084 ft · 2 min · Torne Brook Road

  31. 31

    Turn right onto Lake Street

    47 m · 7 sec · Lake Street

  32. 32

    Arrive at your destination

    0 m · 1 sec · Lake Street

Car Route Details

A richer read on the saved driving route between Gloversville and Ramapo.

OSRM road route
Drive Character

Straightforward drive

The saved road route has a manageable number of maneuvers and should be easy to follow with normal attention to signs.

Directions
32 steps
21 turns on the saved route
Ramps & Exits
4
1 merges, 3 ramps or exits
Navigation Density
19.9 / 100 mi
Decision points by distance
Main Roads
New York State Thruway
142 mi · 88%
Benedict Corners Road
2.61 mi · 2%
State Highway 67
2.52 mi · 2%
Mohawk Turnpike
1.68 mi · 1%
Hales Mills Road Extension
1.25 mi · 1%
Torne Valley Road
1.13 mi · 1%
Longest Stretch

New York State Thruway

Keep slight right to continue on New York State Thruway

118 mi · 02h 16m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 43m
Day trip friendly
Same-Day Return
05h 26m
Round-trip wheel time
Road vs Air
+28.5 mi
132.4 mi direct line
Halfway Stop
Germantown
01h 21m from Gloversville
Leave By
1:04 PM EDT
Morning start is best
Weather Watch

Chance Showers And Thunderstorms leaving Gloversville and Chance Rain Showers near Ramapo.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Gloversville to Ramapo?

The road trip is about 160.9 miles (258.9 km) and usually takes 02h 43m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Germantown is a useful midpoint, sitting about 79.7 miles from Gloversville and 81.2 miles from Ramapo.

How much longer is the road route than the straight-line distance?

The direct path is about 132.4 miles (213.1 km), while the road route adds roughly 28.5 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 1:04 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $22.77 one way or $45.54 round trip. Estimated CO2 is about 50.5 kg one way.

What should you check before leaving?

Before you leave, expect Chance Showers And Thunderstorms around Gloversville and Chance Rain Showers near Ramapo.

Stop Ideas Near Germantown

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Germantown, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Germantown.

RAIL

Hudson

15 mi away
69 South Front St.
RAIL

Rhinecliff–Kingston station

24 mi away
Hutton and Charles Sts.
RAIL

Poughkeepsie station

48 mi away
41 Main St.
RAIL

Albany–Rensselaer

58 mi away
525 East St.

Flight Path Map

This map shows the direct air route between Gloversville and Ramapo. Straight-line distance: 132.39 mi (213.06 km).

Gloversville

#1 Gloversville

City in New York, USA

Population14,553
Coordinates43.0528500, -74.3437500
Altitude250
CountryUnited States
Ramapo

#2 Ramapo

Town in Rockland County, New York, United States

Population138,356
Coordinates41.1412100, -74.1684800
Altitude101
CountryUnited States
Start: North Main Street (-74.34384, 43.052886)
End: Lake Street (-74.168592, 41.140993)

Estimated Travel Time

Distance: 259 km by road

SpeedTime
30 mph (48.3 km/h)05h 21m
40 mph (64.37 km/h)04h 01m
50 mph (80.47 km/h)03h 13m
60 mph (96.56 km/h)02h 40m
70 mph (112.65 km/h)02h 17m
80 mph (129 km/h)02h 00m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
5.68 gal
21.49 L · about $22.77
Round trip
$45.54
11.36 gal · 42.98 L
Estimated CO2
50.5 kg one way
Round trip: 101 kg / 223 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $4.01 $22.77 $45.54
Mid-grade $4.48 $25.45 $50.90
Premium $4.86 $27.61 $55.22
Diesel $4.69 $26.66 $53.32

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in New York · Apr 18, 2026

There is no time difference between Gloversville and Ramapo. The current time is 21:34:40.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.