How far is Fort Thompson, SD from Yankton, SD?

The driving distance from Fort Thompson, SD to Yankton, SD is about 172.6 miles (277.8 km), with a travel time of about 02h 51m by car.

  • The straight-line flight distance is about 131.6 miles (211.8 km).
  • For a round trip, plan for roughly 05h 43m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
172.63 mi
02h 51m
Flight
131.58 mi
211.76 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Fort Thompson.

Flight Distance

Direct air line
131.58 mi
Kilometers
211.76 km
Flight Time
00h 15m

Driving Distance

Road route
172.63 mi
Kilometers
277.82 km
Drive Time
02h 51m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 51m.

Arrival Snapshot
Arrive in Yankton
Thu, Apr 16, 12:00 AM CDT
Return by in Fort Thompson
Thu, Apr 16, 2:52 AM CDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Fort Thompson
2026-04-15T21:09
Arrive Yankton
Thu, Apr 16, 12:00 AM CDT
Route Timing
02h 51m
One way by road
Best Departure Window
8:00 AM to 10:00 AM CDT
Aim for a morning departure
Arrive between
10:52 AM to 12:52 PM CDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
12:46 PM CDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Fort Thompson
9:30 PM CDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Mitchell
SD

City in and county seat of Davison County, South Dakota, United States

From Fort Thompson
92 mi
01h 25m
To Yankton
80.7 mi
01h 25m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
74°F
This Afternoon

Sunny

Starts
Wed, Apr 15 12:00 PM CDT
Wind
6 to 10 mph W
Destination
46°F
Overnight

Chance Rain Showers

Starts
Wed, Apr 15 12:00 AM CDT
Wind
0 to 5 mph NE

Driving Route Map

The map below follows the saved road route between Fort Thompson and Yankton.

Turn-by-Turn Driving Directions

Step-by-step road directions between Fort Thompson and Yankton.

  1. 1

    Start on BIA Route 4

    20 m · 2 sec · BIA Route 4

  2. 2

    Turn right onto SD Highway 249

    1.1 mi · 2 min · SD Highway 249

  3. 3

    Turn straight onto SD Highway 34

    4.6 mi · 7 min · SD Highway 34

  4. 4

    Turn right onto SD Highway 50

    18.8 mi · 28 min · SD Highway 50

  5. 5

    Continue on North Main Street

    1.5 km · 2 min · North Main Street

  6. 6

    Turn left onto East Mott Avenue

    101 m · 17 sec · East Mott Avenue

  7. 7

    Turn right onto North Sanborn Street

    1625 ft · 1 min · North Sanborn Street

  8. 8

    Turn left onto East King Street

    3.2 mi · 5 min · East King Street

  9. 9

    Take the ramp left toward I 90 East

    1848 ft · 45 sec

  10. 10

    Merge slight left

    97.4 mi · 1 hr 31 min

  11. 11

    Take the exit slight right toward US 81: Salem, Yankton

    1983 ft · 50 sec

  12. 12

    Turn right onto US Highway 81

    35.8 mi · 41 min · US Highway 81

  13. 13

    Continue on 291st Street

    1.3 km · 55 sec · 291st Street

  14. 14

    Continue on US Highway 81

    15.6 mi · 18 min · US Highway 81

  15. 15

    Continue on Broadway Avenue

    4.6 mi · 5 min · Broadway Avenue

  16. 16

    Turn right onto West 4th Street

    15 m · 1 sec · West 4th Street

  17. 17

    Arrive at your destination

    0 m · 1 sec · West 4th Street

Car Route Details

A richer read on the saved driving route between Fort Thompson and Yankton.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
17 steps
8 turns on the saved route
Ramps & Exits
3
1 merges, 2 ramps or exits
Navigation Density
9.8 / 100 mi
Decision points by distance
Main Roads
I 90 East
97.7 mi · 57%
US Highway 81
51.5 mi · 30%
SD Highway 50
18.8 mi · 11%
SD Highway 34
4.63 mi · 3%
Broadway Avenue
4.6 mi · 3%
East King Street
3.24 mi · 2%
Longest Stretch

I 90 East

Merge slight left

97.4 mi · 01h 31m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 51m
Day trip friendly
Same-Day Return
05h 44m
Round-trip wheel time
Road vs Air
+41 mi
131.6 mi direct line
Halfway Stop
Mitchell
01h 25m from Fort Thompson
Leave By
12:46 PM CDT
Morning start is best
Weather Watch

Sunny leaving Fort Thompson and Chance Rain Showers near Yankton.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Fort Thompson to Yankton?

The road trip is about 172.6 miles (277.8 km) and usually takes 02h 51m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Mitchell is a useful midpoint, sitting about 92 miles from Fort Thompson and 80.7 miles from Yankton.

How much longer is the road route than the straight-line distance?

The direct path is about 131.6 miles (211.8 km), while the road route adds roughly 41 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 12:46 PM CDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $22.97 one way or $45.93 round trip. Estimated CO2 is about 54.1 kg one way.

What should you check before leaving?

Before you leave, expect Sunny around Fort Thompson and Chance Rain Showers near Yankton.

Flight Path Map

This map shows the direct air route between Fort Thompson and Yankton. Straight-line distance: 131.58 mi (211.76 km).

Fort Thompson

#1 Fort Thompson

Census-designated place in Buffalo County, South Dakota, United States

Population1,282
Coordinates44.0686000, -99.4378800
Altitude439
CountryUnited States
Yankton

#2 Yankton

County seat of Yankton County, South Dakota, United States

Population14,651
Coordinates42.8711100, -97.3972800
Altitude368
CountryUnited States
Start: East Fort Thompson Road (-99.437831, 44.0686)
End: West 4th Street (-97.397278, 42.871173)

Estimated Travel Time

Distance: 278 km by road

SpeedTime
30 mph (48.3 km/h)05h 45m
40 mph (64.37 km/h)04h 18m
50 mph (80.47 km/h)03h 27m
60 mph (96.56 km/h)02h 52m
70 mph (112.65 km/h)02h 27m
80 mph (129 km/h)02h 09m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
6.09 gal
23.06 L · about $22.97
Round trip
$45.93
12.18 gal · 46.12 L
Estimated CO2
54.1 kg one way
Round trip: 108.2 kg / 239 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $22.97 $45.93
Mid-grade $4.25 $25.90 $51.80
Premium $4.65 $28.34 $56.69
Diesel $5.30 $32.30 $64.60

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in South Dakota · Apr 16, 2026

There is no time difference between Fort Thompson and Yankton. The current time is 21:09:07.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.