How far is Cutler, ME from Milbridge, ME?
The driving distance from Cutler, ME to Milbridge, ME is about 45.2 miles (72.7 km), with a travel time of about 00h 59m by car.
- The straight-line flight distance is about 34.4 miles (55.3 km).
- For a round trip, plan for roughly 01h 59m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 59m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in Maine, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Isolated Rain Showers then Areas Of Fog
Patchy Fog
Driving Route Map
The map below follows the saved road route between Cutler and Milbridge.
Turn-by-Turn Driving Directions
Step-by-step road directions between Cutler and Milbridge.
-
1
Start on Cutler Road
12.6 mi · 23 min · Cutler Road
-
2
Turn left onto Water Street
895 ft · 39 sec · Water Street
-
3
Continue on Willow Street
623 ft · 30 sec · Willow Street
-
4
Turn left onto Main Street
3.9 mi · 6 min · Main Street
-
5
Continue on Dublin Street
2.3 mi · 3 min · Dublin Street
-
6
Continue on Outer Dublin Street
1249 ft · 21 sec · Outer Dublin Street
-
7
Continue on Harrington Road
3.3 mi · 5 min · Harrington Road
-
8
Continue on Route 1
14 mi · 21 min · Route 1
-
9
Turn straight onto Main Street
2696 ft · 46 sec · Main Street
-
10
Continue on Kennedy Highway
1084 ft · 18 sec · Kennedy Highway
-
11
Continue on US Highway 1A
3 mi · 5 min · US Highway 1A
-
12
Continue on Kennedy Highway
4.1 mi · 6 min · Kennedy Highway
-
13
Continue on Bridge Street
1721 ft · 34 sec · Bridge Street
-
14
At the end of the road, turn left onto Main Street
1383 ft · 23 sec · Main Street
-
15
Arrive at your destination
0 m · 1 sec · Main Street
Car Route Details
A richer read on the saved driving route between Cutler and Milbridge.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Route 1
Continue on Route 1
14 mi · 00h 21m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Isolated Rain Showers then Areas Of Fog leaving Cutler and Patchy Fog near Milbridge.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Cutler to Milbridge?
The road trip is about 45.2 miles (72.7 km) and usually takes 00h 59m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Jonesboro is a useful midpoint, sitting about 22.6 miles from Cutler and 22.6 miles from Milbridge.
How much longer is the road route than the straight-line distance?
The direct path is about 34.4 miles (55.3 km), while the road route adds roughly 10.8 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:30 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $6.27 one way or $12.55 round trip. Estimated CO2 is about 14.1 kg one way.
What should you check before leaving?
Before you leave, expect Isolated Rain Showers then Areas Of Fog around Cutler and Patchy Fog near Milbridge.
Stop Ideas Near Jonesboro
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Jonesboro.
Orono (University of Maine), Maine
Bangor, Maine
Searsport, Maine
Belfast, Maine
Flight Path Map
This map shows the direct air route between Cutler and Milbridge. Straight-line distance: 34.36 mi (55.3 km).
#1 Cutler
Town in Maine
| Population | 522 |
| Coordinates | 44.6575800, -67.2038700 |
| Altitude | 7 |
| Country | United States |
#2 Milbridge
Town in Washington County, Maine, United States
| Population | 1,301 |
| Coordinates | 44.5353600, -67.8808300 |
| Altitude | 10 |
| Country | United States |
End: North Main Street (-67.880807, 44.535358)
Estimated Travel Time
Distance: 73 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 30m |
| 40 mph (64.37 km/h) | 01h 07m |
| 50 mph (80.47 km/h) | 00h 54m |
| 60 mph (96.56 km/h) | 00h 45m |
| 70 mph (112.65 km/h) | 00h 38m |
| 80 mph (129 km/h) | 00h 33m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.95 | $6.27 | $12.55 |
| Mid-grade | $4.46 | $7.09 | $14.17 |
| Premium | $4.86 | $7.72 | $15.45 |
| Diesel | $6.00 | $9.54 | $19.07 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maine · Apr 16, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.