How far is Culver, IN from Evansville, IN?

The driving distance from Culver, IN to Evansville, IN is about 286.5 miles (461.1 km), with a travel time of about 04h 50m by car.

  • The straight-line flight distance is about 232.1 miles (373.6 km).
  • For a round trip, plan for roughly 09h 40m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
286.52 mi
04h 50m
Flight
232.11 mi
373.55 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Culver.

Flight Distance

Direct air line
232.11 mi
Kilometers
373.55 km
Flight Time
00h 28m

Driving Distance

Road route
286.52 mi
Kilometers
461.11 km
Drive Time
04h 50m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 04h 50m.

Arrival Snapshot
Arrive in Evansville
Wed, Apr 22, 11:23 PM CDT
Return by in Culver
Thu, Apr 23, 5:13 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Culver
2026-04-22T19:33
Arrive Evansville
Thu, Apr 23, 12:23 AM EDT
Route Timing
04h 50m
One way by road
Best Departure Window
6:00 AM to 8:00 AM EDT
Leave early for more breathing room
Arrive between
9:50 AM to 11:50 AM CDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
7:20 AM EDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in Culver
9:00 PM EDT
Early departure recommended

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Brooklyn
IN

Town in Indiana, United States

From Culver
145.8 mi
02h 25m
To Evansville
140.7 mi
02h 25m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
74°F
Wednesday

Mostly Sunny

Starts
Wed, Apr 22 6:00 AM EDT
Wind
5 mph W
Destination
79°F
Wednesday

Sunny

Starts
Wed, Apr 22 6:00 AM CDT
Wind
6 to 10 mph SW

Driving Route Map

The map below follows the saved road route between Culver and Evansville.

Turn-by-Turn Driving Directions

Step-by-step road directions between Culver and Evansville.

  1. 1

    Start on East Lake Shore Drive

    1.3 km · 2 min · East Lake Shore Drive

  2. 2

    Turn right

    9.1 mi · 16 min

  3. 3

    Turn right

    82.1 mi · 1 hr 41 min

  4. 4

    Turn right onto East 226th Street

    82 m · 10 sec · East 226th Street

  5. 5

    Turn left

    98 m · 51 sec

  6. 6

    Continue straight

    98 m · 25 sec

  7. 7

    Turn right onto East 226th Street

    82 m · 10 sec · East 226th Street

  8. 8

    Turn right

    13 mi · 18 min

  9. 9

    Take the exit slight right toward I 465, US 31 South

    1 km · 55 sec

  10. 10

    Keep slight right to continue on I 465 West

    3177 ft · 1 min

  11. 11

    Merge slight left

    4.8 mi · 6 min

  12. 12

    Keep slight right to continue on I 465 South

    19.6 mi · 23 min

  13. 13

    Take the exit slight right toward I 69 South: Evansville

    1.3 km · 2 min

  14. 14

    Continue straight

    47.5 mi · 53 min

  15. 15

    Keep slight left to continue on I 69 South: Evansville

    104.3 mi · 1 hr 52 min

  16. 16

    Take the exit slight right toward Lynch Road

    2078 ft · 40 sec

  17. 17

    Turn slight right

    47 m · 4 sec

  18. 18

    Turn straight onto Lynch Road

    152 m · 16 sec · Lynch Road

  19. 19

    Turn left onto North Burkhardt Road

    2.5 mi · 5 min · North Burkhardt Road

  20. 20

    Turn right onto East Lloyd Expressway

    3.9 mi · 4 min · East Lloyd Expressway

  21. 21

    Take the exit slight right toward US 41 South

    1073 ft · 37 sec

  22. 22

    Merge slight left

    1374 ft · 34 sec

  23. 23

    Turn right onto East Walnut Street

    1.1 km · 1 min · East Walnut Street

  24. 24

    Turn right

    101 m · 26 sec

  25. 25

    At the end of the road, turn right

    37 m · 9 sec

  26. 26

    Arrive at your destination

    0 m · 1 sec

Car Route Details

A richer read on the saved driving route between Culver and Evansville.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
26 steps
13 turns on the saved route
Ramps & Exits
6
2 merges, 4 ramps or exits
Navigation Density
9.1 / 100 mi
Decision points by distance
Main Roads
I 69 South
153 mi · 53%
I 465 South
19.6 mi · 7%
I 465 West
5.41 mi · 2%
East Lloyd Expressway
3.85 mi · 1%
North Burkhardt Road
2.48 mi · 1%
East Lake Shore Drive
0.83 mi
Longest Stretch

I 69 South

Keep slight left to continue on I 69 South: Evansville

104 mi · 01h 52m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
04h 50m
Long day trip
Same-Day Return
09h 40m
Round-trip wheel time
Road vs Air
+54.4 mi
232.1 mi direct line
Halfway Stop
Brooklyn
02h 25m from Culver
Leave By
7:20 AM EDT
Early departure recommended
Weather Watch

Mostly Sunny leaving Culver and Sunny near Evansville.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Culver to Evansville?

The road trip is about 286.5 miles (461.1 km) and usually takes 04h 50m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

Brooklyn is a useful midpoint, sitting about 145.8 miles from Culver and 140.7 miles from Evansville.

How much longer is the road route than the straight-line distance?

The direct path is about 232.1 miles (373.6 km), while the road route adds roughly 54.4 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 7:20 AM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $38.12 one way or $76.25 round trip. Estimated CO2 is about 89.8 kg one way.

Do you cross a time zone on this route?

Yes. There is about a 1 hour time difference between Culver and Evansville, so arrival and return times should be read in local time.

What should you check before leaving?

Before you leave, expect Mostly Sunny around Culver and Sunny near Evansville.

Stop Ideas Near Brooklyn

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Brooklyn, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Brooklyn.

RAIL

Indianapolis Union Station

31 mi away
350 South Illinois Street
RAIL

Crawfordsville

72 mi away
Spring and Green Streets
BUS

Crawfordsville (Bus), Indiana

75 mi away
1000 Smith Ave
RAIL

Connersville station

107 mi away
1012 Eastern Avenue

Flight Path Map

This map shows the direct air route between Culver and Evansville. Straight-line distance: 232.11 mi (373.55 km).

Culver

#1 Culver

City in Oregon, USA

Population1,484
Coordinates41.2189300, -86.4230600
Altitude235
CountryUnited States
Evansville

#2 Evansville

The second most populous city in Indiana.

Population118,407
Coordinates37.9747600, -87.5558500
Altitude118
CountryUnited States
Start: East Lake Shore Drive (-86.423061, 41.218878)
End: (-87.555857, 37.974553)

Estimated Travel Time

Distance: 461 km by road

SpeedTime
30 mph (48.3 km/h)09h 32m
40 mph (64.37 km/h)07h 09m
50 mph (80.47 km/h)05h 43m
60 mph (96.56 km/h)04h 46m
70 mph (112.65 km/h)04h 05m
80 mph (129 km/h)03h 34m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
10.11 gal
38.27 L · about $38.12
Round trip
$76.25
20.22 gal · 76.54 L
Estimated CO2
89.8 kg one way
Round trip: 179.7 kg / 396 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $38.12 $76.25
Mid-grade $4.25 $43.00 $86.00
Premium $4.65 $47.05 $94.10
Diesel $5.30 $53.62 $107.25

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Indiana · Apr 22, 2026

Please keep in mind that there is a 1 hour time gap between Culver, IN and Evansville, IN. The current time in Culver is 19:33:07, although it is 18:33:07 in Evansville.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.