How far is Crownsville, MD from New Mexico, MD?
The driving distance from Crownsville, MD to New Mexico, MD is about 51.6 miles (83 km), with a travel time of about 00h 59m by car.
- The straight-line flight distance is about 43.9 miles (70.6 km).
- For a round trip, plan for roughly 01h 58m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 59m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Census designated place
Route Weather Snapshot
Check the forecast at both ends before you head out.
Rain Showers
Rain Showers Likely
Driving Route Map
The map below follows the saved road route between Crownsville and New Mexico.
Turn-by-Turn Driving Directions
Step-by-step road directions between Crownsville and New Mexico.
-
1
Start on Lancers Trail
603 ft · 31 sec · Lancers Trail
-
2
Turn right onto Generals Highway
1 mi · 2 min · Generals Highway
-
3
Take the ramp straight
1 mi · 2 min
-
4
Merge slight left
1.1 km · 49 sec
-
5
Keep slight left
10.4 mi · 12 min
-
6
Take the exit slight right toward I 695 West: Baltimore, Towson
1.1 mi · 1 min
-
7
Merge slight right onto Baltimore Beltway
13.6 mi · 19 min · Baltimore Beltway
-
8
Take the exit slight right toward I 795 North: Owings Mills, Reisterstown
1.3 km · 1 min
-
9
Continue on Northwest Expressway
8.3 mi · 10 min · Northwest Expressway
-
10
Continue on Northwest Expressway
1.2 km · 56 sec · Northwest Expressway
-
11
Merge slight right onto Westminster Pike
1.7 mi · 3 min · Westminster Pike
-
12
Continue on Baltimore Boulevard
9.1 mi · 14 min · Baltimore Boulevard
-
13
Take the exit slight right
1143 ft · 32 sec
-
14
Keep slight right
130 m · 12 sec
-
15
Turn straight onto Manchester Road
2.4 mi · 4 min · Manchester Road
-
16
Turn left onto Guadelupe Drive
1057 ft · 47 sec · Guadelupe Drive
-
17
Arrive at your destination
0 m · 1 sec · Guadelupe Drive
Car Route Details
A richer read on the saved driving route between Crownsville and New Mexico.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Baltimore Beltway
Merge slight right onto Baltimore Beltway
13.6 mi · 00h 19m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Rain Showers leaving Crownsville and Rain Showers Likely near New Mexico.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Crownsville to New Mexico?
The road trip is about 51.6 miles (83 km) and usually takes 00h 59m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Lochearn is a useful midpoint, sitting about 25.7 miles from Crownsville and 25.8 miles from New Mexico.
How much longer is the road route than the straight-line distance?
The direct path is about 43.9 miles (70.6 km), while the road route adds roughly 7.7 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:32 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $7.44 one way or $14.87 round trip. Estimated CO2 is about 16.2 kg one way.
What should you check before leaving?
Before you leave, expect Rain Showers around Crownsville and Rain Showers Likely near New Mexico.
Stop Ideas Near Lochearn
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Lochearn.
Pennsylvania Station
BWI Rail Station
New Carrollton station
Rockville station
Flight Path Map
This map shows the direct air route between Crownsville and New Mexico. Straight-line distance: 43.86 mi (70.58 km).
#1 Crownsville
Census-designated place in Maryland, United Staes
| Population | 1,757 |
| Coordinates | 39.0284400, -76.6013500 |
| Altitude | 38 |
| Country | United States |
#2 New Mexico
New Mexico is a place in Maryland, United States.
| Population | 0 |
| Coordinates | 39.6034400, -76.9488700 |
| Altitude | 268 |
| Country | United States |
End: Guadelupe Drive (-76.949006, 39.60335)
Estimated Travel Time
Distance: 83 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 43m |
| 40 mph (64.37 km/h) | 01h 17m |
| 50 mph (80.47 km/h) | 01h 01m |
| 60 mph (96.56 km/h) | 00h 51m |
| 70 mph (112.65 km/h) | 00h 44m |
| 80 mph (129 km/h) | 00h 38m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $7.44 | $14.87 |
| Mid-grade | $4.60 | $8.37 | $16.74 |
| Premium | $4.95 | $9.02 | $18.03 |
| Diesel | $5.98 | $10.88 | $21.77 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.