How far is Clinton Township, MI from Riverside, MI?

The driving distance from Clinton Township, MI to Riverside, MI is about 203.3 miles (327.2 km), with a travel time of about 03h 47m by car.

  • The straight-line flight distance is about 178.9 miles (287.9 km).
  • For a round trip, plan for roughly 07h 35m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
203.31 mi
03h 47m
Flight
178.9 mi
287.91 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Clinton Township.

Flight Distance

Direct air line
178.9 mi
Kilometers
287.91 km
Flight Time
00h 21m

Driving Distance

Road route
203.31 mi
Kilometers
327.2 km
Drive Time
03h 47m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 03h 47m.

Arrival Snapshot
Arrive in Riverside
Sat, Apr 18, 10:17 AM EDT
Return by in Clinton Township
Sat, Apr 18, 2:05 PM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Clinton Township
2026-04-18T06:29
Arrive Riverside
Sat, Apr 18, 10:17 AM EDT
Route Timing
03h 47m
One way by road
Best Departure Window
6:00 AM to 8:00 AM EDT
Leave early for more breathing room
Arrive between
9:48 AM to 11:48 AM EDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
9:24 AM EDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in Clinton Township
9:00 PM EDT
Early departure recommended

This departure sits inside the recommended comfort window for the route.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Sandstone
MI

Township in Jackson County, Michigan

From Clinton Township
101.5 mi
01h 53m
To Riverside
101.8 mi
01h 53m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
72°F
Saturday

Showers And Thunderstorms

Starts
Sat, Apr 18 6:00 AM EDT
Wind
9 to 16 mph SSW
Destination
59°F
Saturday

Showers And Thunderstorms

Starts
Sat, Apr 18 6:00 AM EDT
Wind
15 mph SW

Driving Route Map

The map below follows the saved road route between Clinton Township and Riverside.

Turn-by-Turn Driving Directions

Step-by-step road directions between Clinton Township and Riverside.

  1. 1

    Start on Red Oaks Drive

    88 m · 18 sec · Red Oaks Drive

  2. 2

    Turn left onto White Oaks Drive

    1165 ft · 56 sec · White Oaks Drive

  3. 3

    At the end of the road, turn left onto Moravian Drive

    756 ft · 17 sec · Moravian Drive

  4. 4

    Turn right onto Harrington Street

    2930 ft · 1 min · Harrington Street

  5. 5

    Turn right onto South Groesbeck Highway

    7.3 mi · 12 min · South Groesbeck Highway

  6. 6

    Turn right onto East 11 Mile Road

    2669 ft · 59 sec · East 11 Mile Road

  7. 7

    Take the ramp slight left toward I 696 West

    1546 ft · 38 sec

  8. 8

    Merge slight left onto Walter P Reuther Freeway

    23.7 mi · 25 min · Walter P Reuther Freeway

  9. 9

    Take the exit slight right toward I 96 East, I 275: Toledo

    2135 ft · 52 sec

  10. 10

    Keep slight left to continue on I 96 East, I 275: Toledo

    1.3 km · 2 min

  11. 11

    Keep slight left to continue on I 96, I 275: Detroit, Toledo

    1875 ft · 23 sec

  12. 12

    Merge slight right onto Disabled American Veterans Memorial Highway

    5.8 mi · 6 min · Disabled American Veterans Memorial Highway

  13. 13

    Take the exit slight right toward M 14: Ann Arbor

    1 km · 1 min

  14. 14

    Merge slight left

    16.5 mi · 18 min

  15. 15

    Keep slight left to continue on M 14: Ann Arbor

    5.4 mi · 6 min

  16. 16

    Merge slight left onto I 94 West: Chicago

    136.1 mi · 2 hr 26 min

  17. 17

    Take the exit slight right toward I 196 North, US 31 North: South Haven, Holland, Grand Rapids

    2943 ft · 1 min

  18. 18

    Merge slight left

    3.3 mi · 4 min

  19. 19

    Take the exit slight right toward Coloma, Riverside

    874 ft · 30 sec

  20. 20

    Keep slight right

    112 m · 9 sec

  21. 21

    Turn slight right onto Coloma Road

    1321 ft · 34 sec · Coloma Road

  22. 22

    Turn left onto Riverside Road

    1341 ft · 38 sec · Riverside Road

  23. 23

    Arrive at your destination

    0 m · 1 sec · Riverside Road

Car Route Details

A richer read on the saved driving route between Clinton Township and Riverside.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
23 steps
7 turns on the saved route
Ramps & Exits
10
5 merges, 5 ramps or exits
Navigation Density
11.3 / 100 mi
Decision points by distance
Main Roads
I 94 West
136 mi · 67%
Walter P Reuther Freeway
23.7 mi · 12%
M 14
22.5 mi · 11%
South Groesbeck Highway
7.35 mi · 4%
Disabled American Veterans Memorial Highway
5.79 mi · 3%
I 196 North
3.82 mi · 2%
Longest Stretch

I 94 West

Merge slight left onto I 94 West: Chicago

136 mi · 02h 26m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
03h 47m
Long day trip
Same-Day Return
07h 36m
Round-trip wheel time
Road vs Air
+24.4 mi
178.9 mi direct line
Halfway Stop
Sandstone
01h 53m from Clinton Township
Leave By
9:24 AM EDT
Early departure recommended
Weather Watch

Showers And Thunderstorms leaving Clinton Township and Showers And Thunderstorms near Riverside.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Clinton Township to Riverside?

The road trip is about 203.3 miles (327.2 km) and usually takes 03h 47m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

Sandstone is a useful midpoint, sitting about 101.5 miles from Clinton Township and 101.8 miles from Riverside.

How much longer is the road route than the straight-line distance?

The direct path is about 178.9 miles (287.9 km), while the road route adds roughly 24.4 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 9:24 AM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $27.04 one way or $54.08 round trip. Estimated CO2 is about 63.7 kg one way.

What should you check before leaving?

Before you leave, expect Showers And Thunderstorms around Clinton Township and Showers And Thunderstorms near Riverside.

Stop Ideas Near Sandstone

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Sandstone, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Sandstone.

RAIL

Jackson station

10 mi away
501 E. Michigan Ave.
RAIL

Albion station

20 mi away
300 North Eaton St.
RAIL

East Lansing station

52 mi away
1240 South Harrison Road
RAIL

Battle Creek Transportation Center

55 mi away
104 Capital Ave. S.W.

Flight Path Map

This map shows the direct air route between Clinton Township and Riverside. Straight-line distance: 178.9 mi (287.91 km).

Clinton Township

#1 Clinton Township

A city in Macomb County, Michigan.

Population99,753
Coordinates42.5869800, -82.9199200
Altitude183
CountryUnited States
Photo coming soon

#2 Riverside

Township of Michigan

Population1,203
Coordinates42.1833700, -86.3828000
Altitude196
CountryUnited States
Start: Clinton Township (-82.91992, 42.58698)
End: Riverside (-86.3828, 42.18337)

Estimated Travel Time

Distance: 327 km by road

SpeedTime
30 mph (48.3 km/h)06h 46m
40 mph (64.37 km/h)05h 04m
50 mph (80.47 km/h)04h 03m
60 mph (96.56 km/h)03h 23m
70 mph (112.65 km/h)02h 54m
80 mph (129 km/h)02h 32m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
7.17 gal
27.16 L · about $27.04
Round trip
$54.08
14.34 gal · 54.32 L
Estimated CO2
63.7 kg one way
Round trip: 127.4 kg / 281 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $27.04 $54.08
Mid-grade $4.25 $30.49 $60.99
Premium $4.65 $33.37 $66.74
Diesel $5.30 $38.03 $76.06

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Michigan · Apr 18, 2026

There is no time difference between Clinton Township and Riverside. The current time is 06:29:37.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.