How far is Clinton Township, MI from Akron, MI?

The driving distance from Clinton Township, MI to Akron, MI is about 96.4 miles (155.2 km), with a travel time of about 02h 09m by car.

  • The straight-line flight distance is about 74.1 miles (119.3 km).
  • For a round trip, plan for roughly 04h 19m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
96.44 mi
02h 09m
Flight
74.12 mi
119.29 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Clinton Township.

Flight Distance

Direct air line
74.12 mi
Kilometers
119.29 km
Flight Time
00h 08m

Driving Distance

Road route
96.44 mi
Kilometers
155.21 km
Drive Time
02h 09m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 09m.

Arrival Snapshot
Arrive in Akron
Tue, Apr 14, 11:51 PM EDT
Return by in Clinton Township
Wed, Apr 15, 2:00 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Clinton Township
2026-04-14T21:41
Arrive Akron
Tue, Apr 14, 11:51 PM EDT
Route Timing
02h 09m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:10 AM to 12:10 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
2:10 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Clinton Township
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Burnside
MI

Township in Lapeer County, Michigan

From Clinton Township
48.2 mi
01h 04m
To Akron
48.2 mi
01h 04m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
77°F
Tuesday

Light Rain Likely

Starts
Tue, Apr 14 6:00 AM EDT
Wind
9 to 14 mph SW
Destination
74°F
Tuesday

Showers And Thunderstorms Likely

Starts
Tue, Apr 14 6:00 AM EDT
Wind
14 to 18 mph SSW

Driving Route Map

The map below follows the saved road route between Clinton Township and Akron.

Turn-by-Turn Driving Directions

Step-by-step road directions between Clinton Township and Akron.

  1. 1

    Start on Red Oaks Drive

    88 m · 18 sec · Red Oaks Drive

  2. 2

    Turn left onto White Oaks Drive

    1165 ft · 56 sec · White Oaks Drive

  3. 3

    At the end of the road, turn left onto Moravian Drive

    1.2 mi · 3 min · Moravian Drive

  4. 4

    At the end of the road, turn left onto Cass Avenue

    1.6 mi · 2 min · Cass Avenue

  5. 5

    Enter the roundabout and take exit 1 toward Romeo Plank Road

    25 m · 2 sec · Romeo Plank Road

  6. 6

    Exit the roundabout onto Romeo Plank Road

    660 ft · 11 sec · Romeo Plank Road

  7. 7

    Enter the roundabout and take exit 2 toward Romeo Plank Road

    28 m · 2 sec · Romeo Plank Road

  8. 8

    Exit the roundabout onto Romeo Plank Road

    1 mi · 2 min · Romeo Plank Road

  9. 9

    Turn right onto Hall Road

    153 m · 9 sec · Hall Road

  10. 10

    Take the exit slight left toward M 59 West

    79 m · 9 sec

  11. 11

    Merge slight right onto Hall Road

    3.9 mi · 7 min · Hall Road

  12. 12

    Take the exit right toward M 53 North: Imlay City

    1691 ft · 41 sec

  13. 13

    Merge slight left onto Christopher Columbus Freeway

    20.7 mi · 25 min · Christopher Columbus Freeway

  14. 14

    Continue on South Main Street

    1.4 km · 2 min · South Main Street

  15. 15

    Turn left onto North Van Dyke Road

    5.6 mi · 8 min · North Van Dyke Road

  16. 16

    Continue on South Cedar Street

    1.6 mi · 3 min · South Cedar Street

  17. 17

    Continue on North Cedar Street

    3244 ft · 1 min · North Cedar Street

  18. 18

    Continue on North Van Dyke Road

    19.7 mi · 25 min · North Van Dyke Road

  19. 19

    Continue on Main Street

    1.5 mi · 2 min · Main Street

  20. 20

    Continue on South Van Dyke Road

    5.2 mi · 6 min · South Van Dyke Road

  21. 21

    Turn left onto Sanilac Road

    4.5 mi · 5 min · Sanilac Road

  22. 22

    Continue on State Street

    1 mi · 1 min · State Street

  23. 23

    Continue on East Sanilac Road

    9.5 mi · 11 min · East Sanilac Road

  24. 24

    Turn right onto Mertz Road

    5.5 mi · 8 min · Mertz Road

  25. 25

    Continue on Ellington Street

    2434 ft · 43 sec · Ellington Street

  26. 26

    Continue on Cleaver Road

    1.3 mi · 2 min · Cleaver Road

  27. 27

    Continue on Biebel Road

    3.8 mi · 5 min · Biebel Road

  28. 28

    Continue on Unionville Road

    3.4 mi · 5 min · Unionville Road

  29. 29

    Turn left onto Akron Road

    2 mi · 3 min · Akron Road

  30. 30

    Continue on Beach Street

    2654 ft · 47 sec · Beach Street

  31. 31

    Turn right onto Main Street

    625 ft · 27 sec · Main Street

  32. 32

    Arrive at your destination

    0 m · 1 sec · Main Street

Car Route Details

A richer read on the saved driving route between Clinton Township and Akron.

OSRM road route
Drive Character

Turn-heavy local drive

The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.

Directions
32 steps
13 turns on the saved route
Ramps & Exits
8
2 merges, 6 ramps or exits
Navigation Density
33.2 / 100 mi
Decision points by distance
Main Roads
North Van Dyke Road
25.3 mi · 26%
Christopher Columbus Freeway
20.7 mi · 21%
East Sanilac Road
9.47 mi · 10%
Mertz Road
5.52 mi · 6%
South Van Dyke Road
5.25 mi · 5%
Sanilac Road
4.46 mi · 5%
Longest Stretch

Christopher Columbus Freeway

Merge slight left onto Christopher Columbus Freeway

20.7 mi · 00h 25m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 09m
Day trip friendly
Same-Day Return
04h 20m
Round-trip wheel time
Road vs Air
+22.3 mi
74.1 mi direct line
Halfway Stop
Burnside
01h 04m from Clinton Township
Leave By
2:10 PM EDT
Morning start is best
Weather Watch

Light Rain Likely leaving Clinton Township and Showers And Thunderstorms Likely near Akron.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Clinton Township to Akron?

The road trip is about 96.4 miles (155.2 km) and usually takes 02h 09m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Burnside is a useful midpoint, sitting about 48.2 miles from Clinton Township and 48.2 miles from Akron.

How much longer is the road route than the straight-line distance?

The direct path is about 74.1 miles (119.3 km), while the road route adds roughly 22.3 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 2:10 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $12.82 one way or $25.64 round trip. Estimated CO2 is about 30.2 kg one way.

What should you check before leaving?

Before you leave, expect Light Rain Likely around Clinton Township and Showers And Thunderstorms Likely near Akron.

Stop Ideas Near Burnside

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Burnside, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Burnside.

RAIL

Lapeer station

26 mi away
73 Howard St.
RAIL

Flint station

52 mi away
1407 South Dort Highway
RAIL

Port Huron

59 mi away
2223 16th Street
RAIL

Pontiac Transportation Center

66 mi away
51000 Woodward Avenue

Flight Path Map

This map shows the direct air route between Clinton Township and Akron. Straight-line distance: 74.12 mi (119.29 km).

Clinton Township

#1 Clinton Township

A city in Macomb County, Michigan.

Population99,753
Coordinates42.5869800, -82.9199200
Altitude183
CountryUnited States
Akron

#2 Akron

Village in Tuscola County, Michigan, United States

Population373
Coordinates43.5680800, -83.5141300
Altitude195
CountryUnited States
Start: Clinton Township (-82.91992, 42.58698)
End: Akron (-83.51413, 43.56808)

Estimated Travel Time

Distance: 155 km by road

SpeedTime
30 mph (48.3 km/h)03h 12m
40 mph (64.37 km/h)02h 24m
50 mph (80.47 km/h)01h 55m
60 mph (96.56 km/h)01h 36m
70 mph (112.65 km/h)01h 22m
80 mph (129 km/h)01h 12m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
3.4 gal
12.88 L · about $12.82
Round trip
$25.64
6.8 gal · 25.76 L
Estimated CO2
30.2 kg one way
Round trip: 60.4 kg / 133 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $12.82 $25.64
Mid-grade $4.25 $14.46 $28.92
Premium $4.65 $15.82 $31.65
Diesel $5.30 $18.03 $36.07

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Michigan · Apr 15, 2026

There is no time difference between Clinton Township and Akron. The current time is 21:41:41.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.