How far is City of Janesville, WI from Phillips, WI?

The driving distance from City of Janesville, WI to Phillips, WI is about 260.9 miles (419.8 km), with a travel time of about 05h 06m by car.

  • The straight-line flight distance is about 219.1 miles (352.6 km).
  • For a round trip, plan for roughly 10h 12m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM CDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
260.88 mi
05h 06m
Flight
219.07 mi
352.56 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from City of Janesville.

Flight Distance

Direct air line
219.07 mi
Kilometers
352.56 km
Flight Time
00h 26m

Driving Distance

Road route
260.88 mi
Kilometers
419.84 km
Drive Time
05h 06m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 05h 06m.

Arrival Snapshot
Arrive in Phillips
Thu, Jun 11, 3:11 PM CDT
Return by in City of Janesville
Thu, Jun 11, 8:17 PM CDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave City of Janesville
2026-06-11T10:04
Arrive Phillips
Thu, Jun 11, 3:11 PM CDT
Route Timing
05h 06m
One way by road
Best Departure Window
6:00 AM to 8:00 AM CDT
Leave early for more breathing room
Arrive between
11:06 AM to 1:06 PM CDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
6:48 AM CDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in City of Janesville
9:00 PM CDT
Early departure recommended

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Plover
WI

Village in Portage County, Wisconsin

From City of Janesville
130.4 mi
02h 33m
To Phillips
130.4 mi
02h 33m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
86°F
Thursday

Showers And Thunderstorms

Starts
Thu, Jun 11 6:00 AM CDT
Wind
0 to 15 mph S
Destination
75°F
Thursday

Partly Sunny then Showers And Thunderstorms Likely

Starts
Thu, Jun 11 6:00 AM CDT
Wind
5 mph SW

Driving Route Map

The map below follows the saved road route between City of Janesville and Phillips.

Turn-by-Turn Driving Directions

Step-by-step road directions between City of Janesville and Phillips.

  1. 1

    Start on East Court Street

    45 m · 6 sec · East Court Street

  2. 2

    Turn right onto Harrison Street

    156 m · 27 sec · Harrison Street

  3. 3

    Turn left onto East Milwaukee Street

    841 ft · 21 sec · East Milwaukee Street

  4. 4

    Turn sharp right onto Milton Avenue

    3.1 mi · 7 min · Milton Avenue

  5. 5

    Take the exit slight left

    1.3 km · 2 min

  6. 6

    Merge slight left

    61.3 mi · 1 hr 6 min

  7. 7

    Keep slight right to continue on WI 78 South, I 39 North: Merrimac, Portage, Wausau

    1128 ft · 15 sec

  8. 8

    Continue on I 39 North: Portage, Wausau

    103.5 mi · 1 hr 51 min

  9. 9

    Merge slight right

    46.5 mi · 54 min

  10. 10

    Take the exit slight right toward US 8: Prentice, Rhinelander

    1980 ft · 48 sec

  11. 11

    Keep slight left to continue on US 8: Prentice

    118 m · 13 sec

  12. 12

    Merge slight right

    32.2 mi · 45 min

  13. 13

    Turn right

    1125 ft · 41 sec

  14. 14

    Turn straight onto State Highway 13

    10.8 mi · 15 min · State Highway 13

  15. 15

    Continue on South Lake Avenue

    1.4 km · 3 min · South Lake Avenue

  16. 16

    Turn right onto County Highway H

    2185 ft · 1 min · County Highway H

  17. 17

    Turn left onto Beach Road

    699 ft · 31 sec · Beach Road

  18. 18

    Arrive at your destination

    0 m · 1 sec · Beach Road

Car Route Details

A richer read on the saved driving route between City of Janesville and Phillips.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
18 steps
7 turns on the saved route
Ramps & Exits
5
3 merges, 2 ramps or exits
Navigation Density
6.9 / 100 mi
Decision points by distance
Main Roads
I 39 North
150 mi · 58%
Milton Avenue
65.2 mi · 25%
US 8
32.7 mi · 13%
State Highway 13
10.8 mi · 4%
South Lake Avenue
0.87 mi
County Highway H
0.41 mi
Longest Stretch

I 39 North

Continue on I 39 North: Portage, Wausau

104 mi · 01h 51m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
05h 06m
Long day trip
Same-Day Return
10h 12m
Round-trip wheel time
Road vs Air
+41.8 mi
219.1 mi direct line
Halfway Stop
Plover
02h 33m from City of Janesville
Leave By
6:48 AM CDT
Early departure recommended
Weather Watch

Showers And Thunderstorms leaving City of Janesville and Partly Sunny then Showers And Thunderstorms Likely near Phillips.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from City of Janesville to Phillips?

The road trip is about 260.9 miles (419.8 km) and usually takes 05h 06m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

Plover is a useful midpoint, sitting about 130.4 miles from City of Janesville and 130.4 miles from Phillips.

How much longer is the road route than the straight-line distance?

The direct path is about 219.1 miles (352.6 km), while the road route adds roughly 41.8 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM CDT. If you want a more comfortable same-day return, try to leave by 6:48 AM CDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $34.73 one way or $69.46 round trip. Estimated CO2 is about 81.8 kg one way.

What should you check before leaving?

Before you leave, expect Showers And Thunderstorms around City of Janesville and Partly Sunny then Showers And Thunderstorms Likely near Phillips.

Stop Ideas Near Plover

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Plover, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Plover.

BUS

Stevens Point, WI

8 mi away
2050 4th Avenue
BUS

Stevens Point, Wisconsin

9 mi away
200 Division St.
BUS

Wisconsin Rapids, WI

26 mi away
2611 West Grand Avenue
BUS

Waupaca, Wisconsin

36 mi away
1222 West Fulton St.

Flight Path Map

This map shows the direct air route between City of Janesville and Phillips. Straight-line distance: 219.07 mi (352.56 km).

City of Janesville

#1 City of Janesville

The most populous city in Rock County, Wisconsin.

Population64,128
Coordinates42.6857000, -89.0138500
Altitude261
CountryUnited States
Photo coming soon

#2 Phillips

City in and county seat of Price County, Wisconsin, United States

Population1,320
Coordinates45.6966300, -90.4004300
Altitude440
CountryUnited States
Start: City of Janesville (-89.01385, 42.6857)
End: Phillips (-90.40043, 45.69663)

Estimated Travel Time

Distance: 420 km by road

SpeedTime
30 mph (48.3 km/h)08h 41m
40 mph (64.37 km/h)06h 31m
50 mph (80.47 km/h)05h 13m
60 mph (96.56 km/h)04h 20m
70 mph (112.65 km/h)03h 43m
80 mph (129 km/h)03h 15m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
9.21 gal
34.85 L · about $34.73
Round trip
$69.46
18.42 gal · 69.7 L
Estimated CO2
81.8 kg one way
Round trip: 163.7 kg / 361 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $34.73 $69.46
Mid-grade $4.25 $39.17 $78.34
Premium $4.65 $42.86 $85.73
Diesel $5.30 $48.85 $97.70

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Wisconsin · Jun 11, 2026

There is no time difference between City of Janesville and Phillips. The current time is 10:04:59.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.