How far is City of Janesville, WI from Barton, WI?
The driving distance from City of Janesville, WI to Barton, WI is about 94.8 miles (152.6 km), with a travel time of about 02h 05m by car.
- The straight-line flight distance is about 67.2 miles (108.1 km).
- For a round trip, plan for roughly 04h 11m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 05m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Waukesha County, Wisconsin, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Showers And Thunderstorms Likely
Patchy Fog
Driving Route Map
The map below follows the saved road route between City of Janesville and Barton.
Turn-by-Turn Driving Directions
Step-by-step road directions between City of Janesville and Barton.
-
1
Start on East Court Street
45 m · 6 sec · East Court Street
-
2
Turn right onto Harrison Street
156 m · 27 sec · Harrison Street
-
3
Turn left onto East Milwaukee Street
841 ft · 21 sec · East Milwaukee Street
-
4
Turn sharp right onto Milton Avenue
14.2 mi · 21 min · Milton Avenue
-
5
Continue straight
19.9 mi · 24 min
-
6
Take the exit right
1793 ft · 43 sec
-
7
Merge slight left
28 mi · 30 min
-
8
Take the exit slight right toward CTH F: Waukesha, Sussex
1479 ft · 32 sec
-
9
Keep slight left to continue on CTH F North: Waukesha, Sussex
57 m · 6 sec
-
10
Turn left onto Redford Boulevard
4.5 mi · 7 min · Redford Boulevard
-
11
Continue on Waukesha Avenue
1.5 mi · 3 min · Waukesha Avenue
-
12
Turn straight
114 m · 13 sec
-
13
Turn straight onto Main Street
1.2 mi · 2 min · Main Street
-
14
At the end of the road, turn left onto Town Line Road
2241 ft · 54 sec · Town Line Road
-
15
Enter the roundabout and take exit 1 toward West Main Street
23 m · 4 sec · West Main Street
-
16
Exit the roundabout onto West Main Street
1.3 mi · 2 min · West Main Street
-
17
Turn left onto Lannon Road
4 mi · 8 min · Lannon Road
-
18
Enter the roundabout and take exit 2 toward Lannon Road
33 m · 6 sec · Lannon Road
-
19
Exit the roundabout onto Lannon Road
1.1 km · 1 min · Lannon Road
-
20
Take the ramp slight left
4.5 mi · 5 min
-
21
Keep slight right to continue on West Bend Freeway
11.1 mi · 12 min · West Bend Freeway
-
22
Take the exit slight right toward WI 33, WI 144: Washington Street
1200 ft · 29 sec
-
23
Turn right onto West Washington Street
1.1 mi · 3 min · West Washington Street
-
24
Turn left onto North 8th Avenue
990 ft · 41 sec · North 8th Avenue
-
25
At the end of the road, turn left onto North Main Street
1.1 km · 2 min · North Main Street
-
26
Turn right onto Barton Avenue
1741 ft · 1 min · Barton Avenue
-
27
Turn left onto Commerce Street
113 m · 17 sec · Commerce Street
-
28
Turn right onto Monroe Street
79 m · 12 sec · Monroe Street
-
29
Arrive at your destination
0 m · 1 sec · Monroe Street
Car Route Details
A richer read on the saved driving route between City of Janesville and Barton.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Milton Avenue
Merge slight left
28 mi · 00h 30m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Showers And Thunderstorms Likely leaving City of Janesville and Patchy Fog near Barton.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from City of Janesville to Barton?
The road trip is about 94.8 miles (152.6 km) and usually takes 02h 05m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Oconomowoc is a useful midpoint, sitting about 47.3 miles from City of Janesville and 47.4 miles from Barton.
How much longer is the road route than the straight-line distance?
The direct path is about 67.2 miles (108.1 km), while the road route adds roughly 27.6 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 2:18 PM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $12.60 one way or $25.19 round trip. Estimated CO2 is about 29.7 kg one way.
What should you check before leaving?
Before you leave, expect Showers And Thunderstorms Likely around City of Janesville and Patchy Fog near Barton.
Stop Ideas Near Oconomowoc
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Oconomowoc.
Beaver Dam, WI
Milwaukee Intermodal Station
Columbus
Milwaukee Airport Railroad Station
Flight Path Map
This map shows the direct air route between City of Janesville and Barton. Straight-line distance: 67.16 mi (108.09 km).
#1 City of Janesville
The most populous city in Rock County, Wisconsin.
| Population | 64,128 |
| Coordinates | 42.6857000, -89.0138500 |
| Altitude | 261 |
| Country | United States |
#2 Barton
Town in Washington County, Wisconsin, United States
| Population | 2,702 |
| Coordinates | 43.4436100, -88.1806500 |
| Altitude | 284 |
| Country | United States |
End: Barton (-88.18065, 43.44361)
Estimated Travel Time
Distance: 153 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 03h 09m |
| 40 mph (64.37 km/h) | 02h 22m |
| 50 mph (80.47 km/h) | 01h 53m |
| 60 mph (96.56 km/h) | 01h 34m |
| 70 mph (112.65 km/h) | 01h 21m |
| 80 mph (129 km/h) | 01h 10m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $12.60 | $25.19 |
| Mid-grade | $4.25 | $14.21 | $28.41 |
| Premium | $4.65 | $15.54 | $31.09 |
| Diesel | $5.30 | $17.72 | $35.43 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Wisconsin · Apr 15, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.