How far is Channelview, TX from Frisco, TX?

The driving distance from Channelview, TX to Frisco, TX is about 277.8 miles (447.1 km), with a travel time of about 05h 03m by car.

  • The straight-line flight distance is about 254 miles (408.7 km).
  • For a round trip, plan for roughly 10h 07m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM CDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
277.83 mi
05h 03m
Flight
253.97 mi
408.73 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Channelview.

Flight Distance

Direct air line
253.97 mi
Kilometers
408.73 km
Flight Time
00h 30m

Driving Distance

Road route
277.83 mi
Kilometers
447.13 km
Drive Time
05h 03m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 05h 03m.

Arrival Snapshot
Arrive in Frisco
Sat, Apr 11, 8:27 AM CDT
Return by in Channelview
Sat, Apr 11, 1:31 PM CDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Channelview
2026-04-11T03:24
Arrive Frisco
Sat, Apr 11, 8:27 AM CDT
Route Timing
05h 03m
One way by road
Best Departure Window
6:00 AM to 8:00 AM CDT
Leave early for more breathing room
Arrive between
11:04 AM to 1:04 PM CDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
6:52 AM CDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in Channelview
9:00 PM CDT
Early departure recommended

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Buffalo
TX

City in Leon County, Texas

From Channelview
139.1 mi
02h 31m
To Frisco
138.7 mi
02h 31m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
81°F
Saturday

Chance Showers And Thunderstorms

Starts
Sat, Apr 11 6:00 AM CDT
Wind
5 to 15 mph SE
Destination
81°F
Saturday

Partly Sunny then Chance Showers And Thunderstorms

Starts
Sat, Apr 11 6:00 AM CDT
Wind
10 to 15 mph SSE

Driving Route Map

The map below follows the saved road route between Channelview and Frisco.

Turn-by-Turn Driving Directions

Step-by-step road directions between Channelview and Frisco.

  1. 1

    Start on 1st Street

    71 m · 16 sec · 1st Street

  2. 2

    Turn left onto Pemberton Street

    1.1 km · 2 min · Pemberton Street

  3. 3

    Turn right onto Sheldon Road

    550 ft · 22 sec · Sheldon Road

  4. 4

    Turn left onto East Freeway Frontage Road

    2448 ft · 49 sec · East Freeway Frontage Road

  5. 5

    Take the ramp slight left toward I 10 West

    805 ft · 20 sec

  6. 6

    Merge slight left onto East Freeway

    7.3 mi · 9 min · East Freeway

  7. 7

    Take the exit slight right toward I 610 South, I 610 North

    1443 ft · 35 sec

  8. 8

    Keep slight right to continue on I 610 North

    2903 ft · 1 min

  9. 9

    Merge slight left onto East Loop North

    5.9 mi · 7 min · East Loop North

  10. 10

    Take the exit slight right toward Hardy Toll Road North

    3219 ft · 1 min

  11. 11

    Continue on Hardy Toll Road

    21.8 mi · 25 min · Hardy Toll Road

  12. 12

    Merge slight left

    212.6 mi · 3 hr 40 min

  13. 13

    Take the exit slight right toward Main Street West, Elm Street

    1302 ft · 32 sec

  14. 14

    Keep slight right to continue on Elm Street

    577 ft · 14 sec

  15. 15

    Turn straight onto Elm Street

    966 ft · 27 sec · Elm Street

  16. 16

    Turn right onto North Olive Street

    1.6 km · 2 min · North Olive Street

  17. 17

    Continue on McKinnon Street

    2511 ft · 1 min · McKinnon Street

  18. 18

    Take the ramp straight toward DNT Toll

    2325 ft · 44 sec

  19. 19

    Continue on Dallas North Tollway

    22.8 mi · 26 min · Dallas North Tollway

  20. 20

    Take the exit slight right toward Stonebrook Parkway

    1389 ft · 27 sec

  21. 21

    Turn straight onto Dallas Parkway

    1037 ft · 22 sec · Dallas Parkway

  22. 22

    Turn right onto Stonebrook Parkway

    1218 ft · 28 sec · Stonebrook Parkway

  23. 23

    Turn left onto Parkwood Boulevard

    1.6 km · 2 min · Parkwood Boulevard

  24. 24

    Continue on 5th Street

    1075 ft · 35 sec · 5th Street

  25. 25

    Turn right onto Elm Street

    108 m · 21 sec · Elm Street

  26. 26

    Turn left onto 6th Street

    105 m · 15 sec · 6th Street

  27. 27

    Turn left onto Main Street

    94 m · 15 sec · Main Street

  28. 28

    Arrive at your destination

    0 m · 1 sec · Main Street

Car Route Details

A richer read on the saved driving route between Channelview and Frisco.

OSRM road route
Drive Character

Interchange-aware route

The drive includes several ramps, exits, or merges, so checking the next few maneuvers before busy interchanges is useful.

Directions
28 steps
11 turns on the saved route
Ramps & Exits
9
3 merges, 6 ramps or exits
Navigation Density
10.1 / 100 mi
Decision points by distance
Main Roads
Hardy Toll Road
234 mi · 84%
Dallas North Tollway
22.8 mi · 8%
East Freeway
7.33 mi · 3%
East Loop North
5.95 mi · 2%
Parkwood Boulevard
0.97 mi
North Olive Street
0.96 mi
Longest Stretch

Hardy Toll Road

Merge slight left

213 mi · 03h 40m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
05h 03m
Long day trip
Same-Day Return
10h 08m
Round-trip wheel time
Road vs Air
+23.8 mi
254 mi direct line
Halfway Stop
Buffalo
02h 31m from Channelview
Leave By
6:52 AM CDT
Early departure recommended
Weather Watch

Chance Showers And Thunderstorms leaving Channelview and Partly Sunny then Chance Showers And Thunderstorms near Frisco.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Channelview to Frisco?

The road trip is about 277.8 miles (447.1 km) and usually takes 05h 03m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

Buffalo is a useful midpoint, sitting about 139.1 miles from Channelview and 138.7 miles from Frisco.

How much longer is the road route than the straight-line distance?

The direct path is about 254 miles (408.7 km), while the road route adds roughly 23.8 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM CDT. If you want a more comfortable same-day return, try to leave by 6:52 AM CDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $39.94 one way or $79.89 round trip. Estimated CO2 is about 93.9 kg one way.

What should you check before leaving?

Before you leave, expect Chance Showers And Thunderstorms around Channelview and Partly Sunny then Chance Showers And Thunderstorms near Frisco.

Stop Ideas Near Buffalo

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Buffalo, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Buffalo.

BUS

Bryan, TX

93 mi away
301 East 26th Street
BUS

Waco, TX

102 mi away
301 South 8th Street

Flight Path Map

This map shows the direct air route between Channelview and Frisco. Straight-line distance: 253.97 mi (408.73 km).

Channelview

#1 Channelview

Census designated place

Population38,289
Coordinates29.7760600, -95.1146500
Altitude9
CountryUnited States
Frisco

#2 Frisco

Frisco is a city in the US state of Texas located in the counties of Collin and Denton, and an affluent and rapidly developing suburb of Dallas.

Population209,980
Coordinates33.1506700, -96.8236100
Altitude212
CountryUnited States
Start: Channelview (-95.11465, 29.77606)
End: Frisco (-96.82361, 33.15067)

Estimated Travel Time

Distance: 447 km by road

SpeedTime
30 mph (48.3 km/h)09h 15m
40 mph (64.37 km/h)06h 56m
50 mph (80.47 km/h)05h 33m
60 mph (96.56 km/h)04h 37m
70 mph (112.65 km/h)03h 58m
80 mph (129 km/h)03h 27m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
10.57 gal
40.03 L · about $39.94
Round trip
$79.89
21.14 gal · 80.06 L
Estimated CO2
93.9 kg one way
Round trip: 187.9 kg / 414 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.78 $39.94 $79.89
Mid-grade $4.25 $44.94 $89.89
Premium $4.59 $48.53 $97.05
Diesel $3.99 $42.21 $84.41

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Texas · Apr 11, 2026

There is no time difference between Channelview and Frisco. The current time is 03:24:21.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.