How far is Burnsville, MN from Olmsted County, MN?

The driving distance from Burnsville, MN to Olmsted County, MN is about 82.3 miles (132.4 km), with a travel time of about 01h 54m by car.

  • The straight-line flight distance is about 68.2 miles (109.8 km).
  • For a round trip, plan for roughly 03h 48m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
82.28 mi
01h 54m
Flight
68.25 mi
109.83 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Burnsville.

Flight Distance

Direct air line
68.25 mi
Kilometers
109.83 km
Flight Time
00h 08m

Driving Distance

Road route
82.28 mi
Kilometers
132.42 km
Drive Time
01h 54m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 01h 54m.

Arrival Snapshot
Arrive in Olmsted County
Mon, Jul 27, 7:58 AM CDT
Return by in Burnsville
Mon, Jul 27, 9:53 AM CDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Burnsville
2026-07-27T06:04
Arrive Olmsted County
Mon, Jul 27, 7:58 AM CDT
Route Timing
01h 54m
One way by road
Best Departure Window
8:00 AM to 10:00 AM CDT
Aim for a morning departure
Arrive between
9:54 AM to 11:54 AM CDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
2:42 PM CDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Burnsville
9:30 PM CDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Belle Creek
MN

Township in Goodhue County, Minnesota

From Burnsville
41.1 mi
00h 57m
To Olmsted County
41.2 mi
00h 57m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
95°F
Monday

Sunny

Starts
Mon, Jul 27 6:00 AM CDT
Wind
5 to 15 mph W
Destination
91°F
Monday

Chance Showers And Thunderstorms then Sunny

Starts
Mon, Jul 27 6:00 AM CDT
Wind
8 to 13 mph W

Driving Route Map

The map below follows the saved road route between Burnsville and Olmsted County.

Turn-by-Turn Driving Directions

Step-by-step road directions between Burnsville and Olmsted County.

  1. 1

    Start on Nicollet Avenue South

    22 m · 9 sec · Nicollet Avenue South

  2. 2

    Continue on Nicollet Avenue South

    1 mi · 2 min · Nicollet Avenue South

  3. 3

    Turn left onto McAndrews Road East

    1.3 km · 2 min · McAndrews Road East

  4. 4

    Continue on 138th Street East

    1.2 km · 1 min · 138th Street East

  5. 5

    Turn right onto 140th Street West

    1.7 mi · 3 min · 140th Street West

  6. 6

    Turn right onto Cedar Avenue

    2 mi · 3 min · Cedar Avenue

  7. 7

    Turn left onto 160th Street West

    8 mi · 11 min · 160th Street West

  8. 8

    Continue on Brandel Drive

    1.2 mi · 2 min · Brandel Drive

  9. 9

    Take the ramp right toward US 52 South

    2469 ft · 1 min

  10. 10

    Merge slight left

    16.6 mi · 19 min

  11. 11

    Take the exit slight right toward CR 24: Cannon Falls

    1601 ft · 40 sec

  12. 12

    Enter the roundabout and take exit 1 toward County 24 Boulevard

    8 m · 1 sec · County 24 Boulevard

  13. 13

    Exit the roundabout onto County 24 Boulevard

    681 ft · 20 sec · County 24 Boulevard

  14. 14

    Enter the roundabout and take exit 3 toward County 14 Boulevard

    67 m · 6 sec · County 14 Boulevard

  15. 15

    Exit the roundabout onto County 14 Boulevard

    5.8 mi · 9 min · County 14 Boulevard

  16. 16

    Turn left onto County 9 Boulevard

    4.1 mi · 6 min · County 9 Boulevard

  17. 17

    Take the ramp left toward US 52 South

    1133 ft · 42 sec

  18. 18

    Merge slight left

    16.9 mi · 19 min

  19. 19

    Continue straight

    12.6 mi · 15 min

  20. 20

    Take the exit slight right toward CR 22: W Circle Drive, 55th Street NW

    1356 ft · 35 sec

  21. 21

    Turn left onto 55th Street Northwest

    1.9 mi · 3 min · 55th Street Northwest

  22. 22

    Continue on 48th Street Northeast

    1.4 mi · 2 min · 48th Street Northeast

  23. 23

    Turn right onto Broadway Avenue North

    1.5 km · 1 min · Broadway Avenue North

  24. 24

    Turn left onto East Circle Drive Northeast

    3.5 mi · 5 min · East Circle Drive Northeast

  25. 25

    Continue on 30th Avenue Southeast

    1.1 km · 1 min · 30th Avenue Southeast

  26. 26

    Continue on Towne Club Parkway Southeast

    1.2 km · 2 min · Towne Club Parkway Southeast

  27. 27

    Turn left onto Eastwood Road Southeast

    64 m · 6 sec · Eastwood Road Southeast

  28. 28

    Turn right

    42 m · 21 sec

  29. 29

    At the end of the road, turn left

    1726 ft · 3 min

  30. 30

    Arrive at your destination

    0 m · 1 sec

Car Route Details

A richer read on the saved driving route between Burnsville and Olmsted County.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
30 steps
15 turns on the saved route
Ramps & Exits
10
2 merges, 8 ramps or exits
Navigation Density
36.5 / 100 mi
Decision points by distance
Main Roads
US 52 South
46.8 mi · 57%
160th Street West
8.01 mi · 10%
County 14 Boulevard
5.84 mi · 7%
County 9 Boulevard
4.07 mi · 5%
East Circle Drive Northeast
3.49 mi · 4%
Cedar Avenue
1.99 mi · 2%
Longest Stretch

US 52 South

Merge slight left

16.9 mi · 00h 19m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
01h 54m
Day trip friendly
Same-Day Return
03h 48m
Round-trip wheel time
Road vs Air
+14.1 mi
68.2 mi direct line
Halfway Stop
Belle Creek
00h 57m from Burnsville
Leave By
2:42 PM CDT
Morning start is best
Weather Watch

Sunny leaving Burnsville and Chance Showers And Thunderstorms then Sunny near Olmsted County.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Burnsville to Olmsted County?

The road trip is about 82.3 miles (132.4 km) and usually takes 01h 54m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Belle Creek is a useful midpoint, sitting about 41.1 miles from Burnsville and 41.2 miles from Olmsted County.

How much longer is the road route than the straight-line distance?

The direct path is about 68.2 miles (109.8 km), while the road route adds roughly 14.1 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 2:42 PM CDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $10.35 one way or $20.70 round trip. Estimated CO2 is about 25.8 kg one way.

What should you check before leaving?

Before you leave, expect Sunny around Burnsville and Chance Showers And Thunderstorms then Sunny near Olmsted County.

Stop Ideas Near Belle Creek

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Belle Creek, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Belle Creek.

RAIL

Red Wing station

23 mi away
420 Levee Street
RAIL

Saint Paul Union Depot

67 mi away
Midway Station
BUS

Menomonie, WI

83 mi away
302 10th Avenue East
RAIL

Winona station

100 mi away
65 East Mark Street

Flight Path Map

This map shows the direct air route between Burnsville and Olmsted County. Straight-line distance: 68.25 mi (109.83 km).

Burnsville

#1 Burnsville

The most populous city in Dakota County, Minnesota.

Population62,170
Coordinates44.7677400, -93.2777200
Altitude296
CountryUnited States
Olmsted County

#2 Olmsted County

County in Minnesota, United States

Population159,298
Coordinates44.0037500, -92.4017700
Altitude354
CountryUnited States
Start: Burnsville (-93.27772, 44.76774)
End: Olmsted County (-92.40177, 44.00375)

Estimated Travel Time

Distance: 132 km by road

SpeedTime
30 mph (48.3 km/h)02h 44m
40 mph (64.37 km/h)02h 03m
50 mph (80.47 km/h)01h 38m
60 mph (96.56 km/h)01h 22m
70 mph (112.65 km/h)01h 10m
80 mph (129 km/h)01h 01m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
2.9 gal
10.99 L · about $10.35
Round trip
$20.70
5.8 gal · 21.98 L
Estimated CO2
25.8 kg one way
Round trip: 51.5 kg / 114 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.57 $10.35 $20.70
Mid-grade $3.92 $11.37 $22.74
Premium $4.39 $12.74 $25.47
Diesel $4.86 $14.11 $28.21

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Minnesota · Jul 27, 2026

There is no time difference between Burnsville and Olmsted County. The current time is 06:04:30.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.