How far is Broadview, IL from Arlington Heights, IL?
The driving distance from Broadview, IL to Arlington Heights, IL is about 24.2 miles (39 km), with a travel time of about 00h 30m by car.
- The straight-line flight distance is about 16.8 miles (27.1 km).
- For a round trip, plan for roughly 01h 00m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM CDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 30m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Village in United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Broadview and Arlington Heights.
Turn-by-Turn Driving Directions
Step-by-step road directions between Broadview and Arlington Heights.
-
1
Start on Roosevelt Road
31 m · 10 sec · Roosevelt Road
-
2
Turn left onto 17th Avenue
2658 ft · 1 min · 17th Avenue
-
3
Turn left onto Harrison Street
744 ft · 21 sec · Harrison Street
-
4
Take the ramp slight left toward I 290 West
553 ft · 16 sec
-
5
Merge slight left onto Eisenhower Expressway
2.4 mi · 3 min · Eisenhower Expressway
-
6
Keep slight right to continue on I 290 West, I 294 North Toll: Rockford, Milwaukee
5.4 mi · 7 min
-
7
Take the exit slight right toward IL 83 North: Kingery Highway
1.2 km · 2 min
-
8
Merge slight left onto Kingery Highway
2 mi · 3 min · Kingery Highway
-
9
Continue on Busse Road
4.1 mi · 7 min · Busse Road
-
10
Continue on South Busse Road
1.5 km · 2 min · South Busse Road
-
11
Turn left onto West Algonquin Road
1.3 mi · 2 min · West Algonquin Road
-
12
Turn right onto South Arlington Heights Road
3.1 mi · 6 min · South Arlington Heights Road
-
13
Turn left onto East Euclid Avenue
15 m · 2 sec · East Euclid Avenue
-
14
Arrive at your destination
0 m · 1 sec · East Euclid Avenue
Car Route Details
A richer read on the saved driving route between Broadview and Arlington Heights.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
I 290 West
Keep slight right to continue on I 290 West, I 294 North Toll: Rockford, Milwaukee
5.37 mi · 00h 07m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Sunny leaving Broadview and Mostly Sunny near Arlington Heights.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Broadview to Arlington Heights?
The road trip is about 24.2 miles (39 km) and usually takes 00h 30m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Bensenville is a useful midpoint, sitting about 10.4 miles from Broadview and 13.9 miles from Arlington Heights.
How much longer is the road route than the straight-line distance?
The direct path is about 16.8 miles (27.1 km), while the road route adds roughly 7.4 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM CDT. If you want a more comfortable same-day return, try to leave by 7:30 PM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $3.21 one way or $6.41 round trip. Estimated CO2 is about 7.6 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Broadview and Mostly Sunny near Arlington Heights.
Stop Ideas Near Bensenville
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Bensenville.
Glenview station
La Grange Road
Summit
Chicago Union Station
Flight Path Map
This map shows the direct air route between Broadview and Arlington Heights. Straight-line distance: 16.83 mi (27.08 km).
#1 Broadview
Village in Cook County, Illenois, USA
| Population | 7,517 |
| Coordinates | 41.8639200, -87.8533900 |
| Altitude | 192 |
| Country | United States |
#2 Arlington Heights
Village in Cook County, Illinois, United States; suburb of Chicago, Illinois
| Population | 75,101 |
| Coordinates | 42.0883600, -87.9806300 |
| Altitude | 214 |
| Country | United States |
End: East Euclid Avenue (-87.980632, 42.088281)
Estimated Travel Time
Distance: 39 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 48m |
| 40 mph (64.37 km/h) | 00h 36m |
| 50 mph (80.47 km/h) | 00h 29m |
| 60 mph (96.56 km/h) | 00h 24m |
| 70 mph (112.65 km/h) | 00h 20m |
| 80 mph (129 km/h) | 00h 18m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $3.21 | $6.41 |
| Mid-grade | $4.25 | $3.62 | $7.23 |
| Premium | $4.65 | $3.96 | $7.91 |
| Diesel | $5.30 | $4.51 | $9.02 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Illinois · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.