How far is Belton, SC from Anderson County Airport, SC?
The driving distance from Belton, SC to Anderson County Airport, SC is about 15.5 miles (25 km), with a travel time of about 00h 26m by car.
- The straight-line flight distance is about 12.4 miles (19.9 km).
- For a round trip, plan for roughly 00h 52m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 26m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in South Carolina
Route Weather Snapshot
Check the forecast at both ends before you head out.
Sunny
Driving Route Map
The map below follows the saved road route between Belton and Anderson County Airport.
Turn-by-Turn Driving Directions
Step-by-step road directions between Belton and Anderson County Airport.
-
1
Start on Breazeale Street
24 m · 5 sec · Breazeale Street
-
2
Turn right onto North Main Street
114 m · 12 sec · North Main Street
-
3
Turn right onto Anderson Street
2.3 mi · 3 min · Anderson Street
-
4
Continue on Belton Highway
4.7 mi · 7 min · Belton Highway
-
5
Continue on East River Street
2.6 mi · 4 min · East River Street
-
6
Turn left onto East Shockley Ferry Road
2 mi · 2 min · East Shockley Ferry Road
-
7
At the end of the road, turn left onto South Murray Avenue
143 m · 11 sec · South Murray Avenue
-
8
Turn right onto Pearman Dairy Road
2459 ft · 34 sec · Pearman Dairy Road
-
9
Continue on Highway 28 Bypass
2.2 mi · 3 min · Highway 28 Bypass
-
10
Turn left onto West Whitner Street
1.6 km · 2 min · West Whitner Street
-
11
Continue on Highway 24
1 km · 1 min · Highway 24
-
12
Turn left onto Airport Road
2137 ft · 59 sec · Airport Road
-
13
Continue on South Warner Road
1863 ft · 59 sec · South Warner Road
-
14
Turn sharp left onto Airport Road
17 m · 7 sec · Airport Road
-
15
Turn right
89 m · 21 sec
-
16
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Belton and Anderson County Airport.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Belton Highway
Continue on Belton Highway
4.66 mi · 00h 07m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Sunny leaving Belton and Sunny near Anderson County Airport.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Belton to Anderson County Airport?
The road trip is about 15.5 miles (25 km) and usually takes 00h 26m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Anderson is a useful midpoint, sitting about 8.5 miles from Belton and 7.1 miles from Anderson County Airport.
How much longer is the road route than the straight-line distance?
The direct path is about 12.4 miles (19.9 km), while the road route adds roughly 3.1 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:38 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $2.18 one way or $4.36 round trip. Estimated CO2 is about 4.9 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Belton and Sunny near Anderson County Airport.
Stop Ideas Near Anderson
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Anderson.
Clemson
Greenville
Toccoa
Spartanburg
Flight Path Map
This map shows the direct air route between Belton and Anderson County Airport. Straight-line distance: 12.37 mi (19.9 km).
#1 Belton
City in eastern Anderson County, South Carolina, United States
| Population | 4,484 |
| Coordinates | 34.5228900, -82.4942900 |
| Altitude | 275 |
| Country | United States |
#2 Anderson County Airport
A county-owned airport located in Anderson County, South Carolina.
| Population | 194,692 |
| Coordinates | 34.4948300, -82.7087500 |
| Altitude | 230 |
| Country | United States |
End: (-82.712976, 34.495235)
Estimated Travel Time
Distance: 25 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 31m |
| 40 mph (64.37 km/h) | 00h 23m |
| 50 mph (80.47 km/h) | 00h 18m |
| 60 mph (96.56 km/h) | 00h 15m |
| 70 mph (112.65 km/h) | 00h 13m |
| 80 mph (129 km/h) | 00h 11m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.96 | $2.18 | $4.36 |
| Mid-grade | $4.43 | $2.44 | $4.87 |
| Premium | $4.78 | $2.63 | $5.26 |
| Diesel | $5.62 | $3.09 | $6.19 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in South Carolina · May 13, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.