How far is Bel Air, MD from Fort Washington, MD?
The driving distance from Bel Air, MD to Fort Washington, MD is about 82.8 miles (133.2 km), with a travel time of about 01h 35m by car.
- The straight-line flight distance is about 67.7 miles (109 km).
- For a round trip, plan for roughly 03h 10m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 35m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Locality in Howard and Anne Arundel counties, Maryland, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny then Chance Rain Showers
Sunny then Slight Chance Rain Showers
Driving Route Map
The map below follows the saved road route between Bel Air and Fort Washington.
Turn-by-Turn Driving Directions
Step-by-step road directions between Bel Air and Fort Washington.
-
1
Start on Courtland Place
123 m · 20 sec · Courtland Place
-
2
Turn right onto South Hickory Avenue
104 m · 10 sec · South Hickory Avenue
-
3
Turn right onto Churchville Road
1851 ft · 56 sec · Churchville Road
-
4
At the end of the road, turn right onto Baltimore Pike
2618 ft · 1 min · Baltimore Pike
-
5
Turn left onto Vietnam Veterans Memorial Highway
5.2 mi · 8 min · Vietnam Veterans Memorial Highway
-
6
Take the exit slight right toward I 95 South: Baltimore
1 km · 1 min
-
7
Merge slight left onto John F. Kennedy Memorial Highway
8.1 mi · 9 min · John F. Kennedy Memorial Highway
-
8
Keep slight left to continue on Express Toll Lanes
6.5 mi · 8 min · Express Toll Lanes
-
9
Keep slight left to continue on Express Toll Lanes
1.2 mi · 2 min · Express Toll Lanes
-
10
Merge slight right onto Harbor Tunnel Thruway
7.4 mi · 11 min · Harbor Tunnel Thruway
-
11
Continue on Harbor Tunnel Throughway
2567 ft · 40 sec · Harbor Tunnel Throughway
-
12
Keep slight left to continue on Harbor Tunnel Throughway
2671 ft · 42 sec · Harbor Tunnel Throughway
-
13
Continue on Harbor Tunnel Thruway
1.3 mi · 2 min · Harbor Tunnel Thruway
-
14
Take the exit slight right toward MD 295 South: Essex, BWI Marshall Airport
2423 ft · 59 sec
-
15
Merge slight left onto Baltimore-Washington Parkway
27.1 mi · 37 min · Baltimore-Washington Parkway
-
16
Keep slight left to continue on US 50 East: Richmond, Annapolis
2902 ft · 35 sec
-
17
Continue on Kenilworth Avenue Freeway
2.2 mi · 3 min · Kenilworth Avenue Freeway
-
18
Continue on Anacostia Freeway
8.4 mi · 13 min · Anacostia Freeway
-
19
Keep slight right to continue on Indian Head
1.6 km · 2 min
-
20
Keep slight left to continue on MD 210 South
1391 ft · 34 sec
-
21
Merge slight left onto Indian Head Highway
5.7 mi · 9 min · Indian Head Highway
-
22
Turn right onto Old Fort Road
1.4 mi · 3 min · Old Fort Road
-
23
Turn left onto Washington Drive
1057 ft · 47 sec · Washington Drive
-
24
Continue on Diggers Lane
1011 ft · 49 sec · Diggers Lane
-
25
At the end of the road, turn left onto Reid Lane
96 m · 17 sec · Reid Lane
-
26
Turn right onto Warburton Drive
748 ft · 33 sec · Warburton Drive
-
27
Arrive at your destination
0 m · 1 sec · Warburton Drive
Car Route Details
A richer read on the saved driving route between Bel Air and Fort Washington.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Baltimore-Washington Parkway
Merge slight left onto Baltimore-Washington Parkway
27.1 mi · 00h 37m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Sunny then Chance Rain Showers leaving Bel Air and Sunny then Slight Chance Rain Showers near Fort Washington.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Bel Air to Fort Washington?
The road trip is about 82.8 miles (133.2 km) and usually takes 01h 35m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Jessup is a useful midpoint, sitting about 40 miles from Bel Air and 42.8 miles from Fort Washington.
How much longer is the road route than the straight-line distance?
The direct path is about 67.7 miles (109 km), while the road route adds roughly 15.1 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 3:20 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $11.93 one way or $23.86 round trip. Estimated CO2 is about 26 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny then Chance Rain Showers around Bel Air and Sunny then Slight Chance Rain Showers near Fort Washington.
Stop Ideas Near Jessup
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
City of Bowie
Baltimore City Hall
Kenhill Center
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Jessup.
BWI Rail Station
Pennsylvania Station
New Carrollton station
Rockville station
Flight Path Map
This map shows the direct air route between Bel Air and Fort Washington. Straight-line distance: 67.72 mi (108.98 km).
#1 Bel Air
Town in Harford County, Maryland, United States
| Population | 10,266 |
| Coordinates | 39.5359400, -76.3482900 |
| Altitude | 118 |
| Country | United States |
#2 Fort Washington
Unincorporated community in Prince George's County, Maryland, United States
| Population | 24,183 |
| Coordinates | 38.7073400, -77.0230300 |
| Altitude | 32 |
| Country | United States |
End: Warburton Drive (-77.022819, 38.707437)
Estimated Travel Time
Distance: 133 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 02h 45m |
| 40 mph (64.37 km/h) | 02h 04m |
| 50 mph (80.47 km/h) | 01h 39m |
| 60 mph (96.56 km/h) | 01h 22m |
| 70 mph (112.65 km/h) | 01h 10m |
| 80 mph (129 km/h) | 01h 01m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $11.93 | $23.86 |
| Mid-grade | $4.60 | $13.43 | $26.86 |
| Premium | $4.95 | $14.47 | $28.93 |
| Diesel | $5.98 | $17.46 | $34.92 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Maryland · May 01, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.