How far is Arlington Heights, IL from Glencoe, IL?

The driving distance from Arlington Heights, IL to Glencoe, IL is about 14.9 miles (24 km), with a travel time of about 00h 28m by car.

  • The straight-line flight distance is about 11.9 miles (19.1 km).
  • For a round trip, plan for roughly 00h 56m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 7:00 AM to 7:00 PM CDT.
Trip Tools

Reverse, save, or send this route

This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
14.94 mi
00h 28m
Flight
11.85 mi
19.07 km direct

This is an easy same-day return drive.

Learn Distance

Choose another destination from Arlington Heights.

Flight Distance

Direct air line
11.85 mi
Kilometers
19.07 km
Flight Time
00h 01m

Driving Distance

Road route
14.94 mi
Kilometers
24.05 km
Drive Time
00h 28m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 00h 28m.

Arrival Snapshot
Arrive in Glencoe
Thu, Apr 23, 7:03 AM CDT
Return by in Arlington Heights
Thu, Apr 23, 7:32 AM CDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Arlington Heights
2026-04-23T06:35
Arrive Glencoe
Thu, Apr 23, 7:03 AM CDT
Route Timing
00h 28m
One way by road
Best Departure Window
7:00 AM to 7:00 PM CDT
Leave when it suits your day
Arrive between
7:28 AM to 7:28 PM CDT

This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.

Leave by
7:34 PM CDT
Keeps a same-day return open with about 01h 30m at the destination.
Back in Arlington Heights
10:00 PM CDT
Flexible departure

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Ridgeland
IL

Township in Iroquois County, Illinois

From Arlington Heights
7.5 mi
00h 14m
To Glencoe
7.5 mi
00h 14m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
80°F
Thursday

Mostly Sunny

Starts
Thu, Apr 23 6:00 AM CDT
Wind
10 to 20 mph S
Destination
78°F
Thursday

Mostly Sunny

Starts
Thu, Apr 23 6:00 AM CDT
Wind
10 to 20 mph S

Driving Route Map

The map below follows the saved road route between Arlington Heights and Glencoe.

Turn-by-Turn Driving Directions

Step-by-step road directions between Arlington Heights and Glencoe.

  1. 1

    Start on East Euclid Avenue

    15 m · 9 sec · East Euclid Avenue

  2. 2

    Turn left onto North Arlington Heights Road

    1.5 mi · 4 min · North Arlington Heights Road

  3. 3

    Turn right onto Palatine Road

    5.1 mi · 8 min · Palatine Road

  4. 4

    Continue on Willow Road

    2.8 mi · 4 min · Willow Road

  5. 5

    Turn left onto Shermer Road

    1.9 mi · 4 min · Shermer Road

  6. 6

    Keep slight right to continue on Shermer Road

    1 mi · 2 min · Shermer Road

  7. 7

    Turn slight right onto Dundee Road

    2.4 mi · 6 min · Dundee Road

  8. 8

    At the end of the road, turn right onto Green Bay Road

    1831 ft · 60 sec · Green Bay Road

  9. 9

    Turn left onto Park Avenue

    17 m · 8 sec · Park Avenue

  10. 10

    Turn left

    16 m · 4 sec

  11. 11

    Arrive at your destination

    0 m · 1 sec

Car Route Details

A richer read on the saved driving route between Arlington Heights and Glencoe.

OSRM road route
Drive Character

Turn-heavy local drive

The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.

Directions
11 steps
7 turns on the saved route
Ramps & Exits
0
0 merges, 0 ramps or exits
Navigation Density
73.8 / 100 mi
Decision points by distance
Main Roads
Palatine Road
5.06 mi · 34%
Shermer Road
2.91 mi · 19%
Willow Road
2.78 mi · 19%
Dundee Road
2.35 mi · 16%
North Arlington Heights Road
1.46 mi · 10%
Green Bay Road
0.35 mi · 2%
Longest Stretch

Palatine Road

Turn right onto Palatine Road

5.06 mi · 00h 08m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A short regional drive

This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.

Drive Time
00h 28m
Quick drive
Same-Day Return
00h 56m
Round-trip wheel time
Road vs Air
+3 mi
11.9 mi direct line
Halfway Stop
Ridgeland
00h 14m from Arlington Heights
Leave By
7:34 PM CDT
Flexible departure
Weather Watch

Mostly Sunny leaving Arlington Heights and Mostly Sunny near Glencoe.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Arlington Heights to Glencoe?

The road trip is about 14.9 miles (24 km) and usually takes 00h 28m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.

What is the halfway point on this route?

Ridgeland is a useful midpoint, sitting about 7.5 miles from Arlington Heights and 7.5 miles from Glencoe.

How much longer is the road route than the straight-line distance?

The direct path is about 11.9 miles (19.1 km), while the road route adds roughly 3 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 7:00 AM to 7:00 PM CDT. If you want a more comfortable same-day return, try to leave by 7:34 PM CDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $2.00 one way or $4.00 round trip. Estimated CO2 is about 4.7 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Sunny around Arlington Heights and Mostly Sunny near Glencoe.

Stop Ideas Near Ridgeland

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Ridgeland, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Ridgeland.

RAIL

Glenview station

8 mi away
1116 Depot St.
RAIL

La Grange Road

34 mi away
25 West Burlington St.
RAIL

Chicago Union Station

34 mi away
225 South Canal Street
RAIL

Summit

37 mi away
Archer Ave. and South Center Ave.

Flight Path Map

This map shows the direct air route between Arlington Heights and Glencoe. Straight-line distance: 11.85 mi (19.07 km).

Arlington Heights

#1 Arlington Heights

Village in Cook County, Illinois, United States; suburb of Chicago, Illinois

Population75,101
Coordinates42.0883600, -87.9806300
Altitude214
CountryUnited States
Glencoe

#2 Glencoe

Village in Cook County, Illinois, United States

Population8,747
Coordinates42.1350300, -87.7581200
Altitude205
CountryUnited States
Start: Arlington Heights (-87.98063, 42.08836)
End: Glencoe (-87.75812, 42.13503)

Estimated Travel Time

Distance: 24 km by road

SpeedTime
30 mph (48.3 km/h)00h 29m
40 mph (64.37 km/h)00h 22m
50 mph (80.47 km/h)00h 17m
60 mph (96.56 km/h)00h 14m
70 mph (112.65 km/h)00h 12m
80 mph (129 km/h)00h 11m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
0.53 gal
2 L · about $2.00
Round trip
$4.00
1.06 gal · 4 L
Estimated CO2
4.7 kg one way
Round trip: 9.4 kg / 21 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $2.00 $4.00
Mid-grade $4.25 $2.25 $4.51
Premium $4.65 $2.47 $4.93
Diesel $5.30 $2.81 $5.62

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Illinois · Apr 23, 2026

There is no time difference between Arlington Heights and Glencoe. The current time is 06:35:35.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.