How far is Albany, OR from Canby, OR?
The driving distance from Albany, OR to Canby, OR is about 53.3 miles (85.8 km), with a travel time of about 01h 09m by car.
- The straight-line flight distance is about 47.8 miles (76.9 km).
- For a round trip, plan for roughly 02h 19m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM PDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 09m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Keokuk County, Iowa, United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Partly Sunny
Partly Sunny
Driving Route Map
The map below follows the saved road route between Albany and Canby.
Turn-by-Turn Driving Directions
Step-by-step road directions between Albany and Canby.
-
1
Start on 2nd Avenue Southwest
1.1 km · 1 min · 2nd Avenue Southwest
-
2
Turn right onto Main Street Southeast
68 m · 5 sec · Main Street Southeast
-
3
Enter the roundabout and take exit 3 toward Salem Avenue Southeast
69 m · 4 sec · Salem Avenue Southeast
-
4
Exit the roundabout onto Salem Avenue Southeast
1.3 mi · 3 min · Salem Avenue Southeast
-
5
Turn right onto Albany Avenue
133 m · 18 sec · Albany Avenue
-
6
Turn left onto Pacific Boulevard Southeast
76 m · 5 sec · Pacific Boulevard Southeast
-
7
Continue on Albany-Junction City Highway
623 ft · 12 sec · Albany-Junction City Highway
-
8
Take the exit straight
44.1 mi · 53 min
-
9
Take the exit slight right toward Donald, Aurora
2180 ft · 44 sec
-
10
Turn right onto Ehlen Road Northeast
2.7 mi · 5 min · Ehlen Road Northeast
-
11
Turn left onto Pacific Highway East
1.9 mi · 3 min · Pacific Highway East
-
12
Continue on Southwest Pacific Highway East
1.6 km · 1 min · Southwest Pacific Highway East
-
13
Continue on Southwest 1st Avenue
1.4 km · 2 min · Southwest 1st Avenue
-
14
Turn left onto North Ivy Street
78 m · 7 sec · North Ivy Street
-
15
Arrive at your destination
0 m · 1 sec · North Ivy Street
Car Route Details
A richer read on the saved driving route between Albany and Canby.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Albany-Junction City Highway
Take the exit straight
44.1 mi · 00h 53m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Partly Sunny leaving Albany and Partly Sunny near Canby.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Albany to Canby?
The road trip is about 53.3 miles (85.8 km) and usually takes 01h 09m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Hayesville is a useful midpoint, sitting about 26.7 miles from Albany and 26.7 miles from Canby.
How much longer is the road route than the straight-line distance?
The direct path is about 47.8 miles (76.9 km), while the road route adds roughly 5.5 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM PDT. If you want a more comfortable same-day return, try to leave by 4:10 PM PDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $9.31 one way or $18.62 round trip. Estimated CO2 is about 16.7 kg one way.
What should you check before leaving?
Before you leave, expect Partly Sunny around Albany and Partly Sunny near Canby.
Stop Ideas Near Hayesville
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Salem city park
Woodburn City Hall
Council Chambers City of Keizer
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Hayesville.
Salem station
Woodburn, OR
Albany station
Corvallis, Oregon
Flight Path Map
This map shows the direct air route between Albany and Canby. Straight-line distance: 47.76 mi (76.87 km).
#1 Albany
The most populous city in Linn County, Oregon.
| Population | 56,129 |
| Coordinates | 44.6365100, -123.1059300 |
| Altitude | 65 |
| Country | United States |
#2 Canby
City in Oregon, USA
| Population | 18,027 |
| Coordinates | 45.2629000, -122.6925900 |
| Altitude | 48 |
| Country | United States |
End: Canby (-122.69259, 45.2629)
Estimated Travel Time
Distance: 86 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 46m |
| 40 mph (64.37 km/h) | 01h 20m |
| 50 mph (80.47 km/h) | 01h 04m |
| 60 mph (96.56 km/h) | 00h 53m |
| 70 mph (112.65 km/h) | 00h 45m |
| 80 mph (129 km/h) | 00h 39m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.95 | $9.31 | $18.62 |
| Mid-grade | $5.34 | $10.04 | $20.07 |
| Premium | $5.57 | $10.46 | $20.93 |
| Diesel | $6.37 | $11.97 | $23.94 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Oregon · May 02, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.