How far is Walkertown, NC from Asheville, NC?
The driving distance from Walkertown, NC to Asheville, NC is about 153.4 miles (246.9 km), with a travel time of about 02h 28m by car.
- The straight-line flight distance is about 140.1 miles (225.5 km).
- For a round trip, plan for roughly 04h 56m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 28m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Human settlement in Catawba County, North Carolina, United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Showers And Thunderstorms
Showers And Thunderstorms
Driving Route Map
The map below follows the saved road route between Walkertown and Asheville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Walkertown and Asheville.
-
1
Start on Sullivantown Road
10 m · 7 sec · Sullivantown Road
-
2
Turn sharp right onto Main Street
2460 ft · 48 sec · Main Street
-
3
Turn left onto Old Hollow Road
885 ft · 19 sec · Old Hollow Road
-
4
Turn right onto Darrow Road
1.4 km · 1 min · Darrow Road
-
5
Turn slight right onto Reidsville Road
12.4 mi · 17 min · Reidsville Road
-
6
Take the exit slight left toward I 40: Greensboro, Statesville
1 km · 44 sec
-
7
Keep slight left to continue on I 40 West: Statesville
1505 ft · 20 sec
-
8
Merge slight left
134 mi · 2 hr 32 min
-
9
Keep slight right to continue on Billy Graham Freeway
4.6 mi · 6 min · Billy Graham Freeway
-
10
Take the exit slight right toward US 25
918 ft · 27 sec
-
11
Turn right
14 m · 3 sec
-
12
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Walkertown and Asheville.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
I 40 West
Merge slight left
134 mi · 02h 32m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Showers And Thunderstorms leaving Walkertown and Showers And Thunderstorms near Asheville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Walkertown to Asheville?
The road trip is about 153.4 miles (246.9 km) and usually takes 02h 28m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Brookford is a useful midpoint, sitting about 76.6 miles from Walkertown and 76.7 miles from Asheville.
How much longer is the road route than the straight-line distance?
The direct path is about 140.1 miles (225.5 km), while the road route adds roughly 13.3 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 1:34 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $21.43 one way or $42.86 round trip. Estimated CO2 is about 48.1 kg one way.
What should you check before leaving?
Before you leave, expect Showers And Thunderstorms around Walkertown and Showers And Thunderstorms near Asheville.
Stop Ideas Near Brookford
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Brookford.
Gastonia
Kannapolis
Charlotte
Salisbury
Flight Path Map
This map shows the direct air route between Walkertown and Asheville. Straight-line distance: 140.13 mi (225.52 km).
#1 Walkertown
City in Forsyth County, North Carolina, United States of America
| Population | 4,969 |
| Coordinates | 36.1754100, -80.1531000 |
| Altitude | 302 |
| Country | United States |
#2 Asheville
The most populous city in Buncombe County, North Carolina.
| Population | 92,852 |
| Coordinates | 35.6009500, -82.5540200 |
| Altitude | 649 |
| Country | United States |
End: (-82.554029, 35.600953)
Estimated Travel Time
Distance: 247 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 05h 06m |
| 40 mph (64.37 km/h) | 03h 50m |
| 50 mph (80.47 km/h) | 03h 04m |
| 60 mph (96.56 km/h) | 02h 33m |
| 70 mph (112.65 km/h) | 02h 11m |
| 80 mph (129 km/h) | 01h 54m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.96 | $21.43 | $42.86 |
| Mid-grade | $4.43 | $23.96 | $47.92 |
| Premium | $4.78 | $25.85 | $51.70 |
| Diesel | $5.62 | $30.43 | $60.85 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in North Carolina · May 26, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.