How far is Shalersville, OH from Youngstown, OH?

The driving distance from Shalersville, OH to Youngstown, OH is about 38.2 miles (61.5 km), with a travel time of about 00h 39m by car.

  • The straight-line flight distance is about 31.8 miles (51.1 km).
  • For a round trip, plan for roughly 01h 19m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Trip Tools

Reverse, save, or send this route

This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
38.24 mi
00h 39m
Flight
31.75 mi
51.09 km direct

This is an easy same-day return drive.

Learn Distance

Choose another destination from Shalersville.

Flight Distance

Direct air line
31.75 mi
Kilometers
51.09 km
Flight Time
00h 03m

Driving Distance

Road route
38.24 mi
Kilometers
61.54 km
Drive Time
00h 39m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 00h 39m.

Arrival Snapshot
Arrive in Youngstown
Mon, Jun 1, 9:12 PM EDT
Return by in Shalersville
Mon, Jun 1, 9:52 PM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Shalersville
2026-06-01T20:33
Arrive Youngstown
Mon, Jun 1, 9:12 PM EDT
Route Timing
00h 39m
One way by road
Best Departure Window
7:00 AM to 7:00 PM EDT
Leave when it suits your day
Arrive between
7:40 AM to 7:40 PM EDT

This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.

Leave by
7:10 PM EDT
Keeps a same-day return open with about 01h 30m at the destination.
Back in Shalersville
10:00 PM EDT
Flexible departure

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Newton Falls
OH

Village in Ohio, United States

From Shalersville
19 mi
00h 19m
To Youngstown
19.3 mi
00h 19m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
73°F
This Afternoon

Mostly Sunny

Starts
Mon, Jun 1 4:00 PM EDT
Wind
9 mph N
Destination
76°F
This Afternoon

Mostly Sunny

Starts
Mon, Jun 1 4:00 PM EDT
Wind
9 mph N

Driving Route Map

The map below follows the saved road route between Shalersville and Youngstown.

Turn-by-Turn Driving Directions

Step-by-step road directions between Shalersville and Youngstown.

  1. 1

    Start on the route

    2895 ft · 55 sec

  2. 2

    Take the ramp left toward I 80: Ohio Turnpike

    1547 ft · 38 sec

  3. 3

    Keep slight left to continue on I 80 East: Youngstown

    2844 ft · 1 min

  4. 4

    Merge slight left onto Ohio Turnpike

    24.3 mi · 26 min · Ohio Turnpike

  5. 5

    Take the exit slight right toward I 80 East

    1.4 km · 2 min

  6. 6

    Keep slight left to continue on I 80 East, CR 18: Youngstown, Mahoning Avenue

    1328 ft · 32 sec

  7. 7

    Keep slight left to continue on I 80 East: Youngstown

    4.5 mi · 6 min

  8. 8

    Keep slight right to continue on I 680: Youngstown

    5.9 mi · 8 min

  9. 9

    Take the exit slight right

    1304 ft · 39 sec

  10. 10

    Turn sharp left onto Market Street

    3144 ft · 59 sec · Market Street

  11. 11

    Keep slight right to continue on Central Square

    38 m · 2 sec · Central Square

  12. 12

    Arrive at your destination

    0 m · 1 sec · Central Square

Car Route Details

A richer read on the saved driving route between Shalersville and Youngstown.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
12 steps
3 turns on the saved route
Ramps & Exits
4
1 merges, 3 ramps or exits
Navigation Density
31.4 / 100 mi
Decision points by distance
Main Roads
Ohio Turnpike
24.3 mi · 64%
I 80 East
6.17 mi · 16%
I 680
6.14 mi · 16%
Market Street
0.6 mi · 2%
I 80
0.29 mi · 1%
Central Square
0.02 mi
Longest Stretch

Ohio Turnpike

Merge slight left onto Ohio Turnpike

24.3 mi · 00h 26m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A short regional drive

This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.

Drive Time
00h 39m
Quick drive
Same-Day Return
01h 20m
Round-trip wheel time
Road vs Air
+6.4 mi
31.8 mi direct line
Halfway Stop
Newton Falls
00h 19m from Shalersville
Leave By
7:10 PM EDT
Flexible departure
Weather Watch

Mostly Sunny leaving Shalersville and Mostly Sunny near Youngstown.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Shalersville to Youngstown?

The road trip is about 38.2 miles (61.5 km) and usually takes 00h 39m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.

What is the halfway point on this route?

Newton Falls is a useful midpoint, sitting about 19 miles from Shalersville and 19.3 miles from Youngstown.

How much longer is the road route than the straight-line distance?

The direct path is about 31.8 miles (51.1 km), while the road route adds roughly 6.4 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:10 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $5.00 one way or $10.00 round trip. Estimated CO2 is about 12 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Sunny around Shalersville and Mostly Sunny near Youngstown.

Stop Ideas Near Newton Falls

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Newton Falls, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Newton Falls.

RAIL

Alliance

31 mi away
820 East Main Street
RAIL

Cleveland Lakefront station

70 mi away
200 Cleveland Memorial Shoreway
RAIL

Elyria

96 mi away
410 East River Road
RAIL

Union Station

117 mi away
1100 Liberty Avenue

Flight Path Map

This map shows the direct air route between Shalersville and Youngstown. Straight-line distance: 31.75 mi (51.09 km).

Shalersville

#1 Shalersville

Township in Portage County, Ohio

Population5,649
Coordinates41.2389400, -81.2312100
Altitude377
CountryUnited States
Youngstown

#2 Youngstown

The most populous city in Mahoning County, Ohio.

Population63,828
Coordinates41.0997800, -80.6495200
Altitude259
CountryUnited States
Start: SR 44 (-81.231185, 41.238917)
End: Central Square (-80.649441, 41.09972)

Estimated Travel Time

Distance: 62 km by road

SpeedTime
30 mph (48.3 km/h)01h 16m
40 mph (64.37 km/h)00h 57m
50 mph (80.47 km/h)00h 45m
60 mph (96.56 km/h)00h 38m
70 mph (112.65 km/h)00h 32m
80 mph (129 km/h)00h 28m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
1.35 gal
5.11 L · about $5.00
Round trip
$10.00
2.7 gal · 10.22 L
Estimated CO2
12 kg one way
Round trip: 24 kg / 53 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.71 $5.00 $10.00
Mid-grade $4.24 $5.73 $11.45
Premium $4.79 $6.47 $12.93
Diesel $4.30 $5.81 $11.62

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Ohio · Jun 02, 2026

There is no time difference between Shalersville and Youngstown. The current time is 20:33:05.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.