How far is Sesser, IL from Bloomington, IL?

The driving distance from Sesser, IL to Bloomington, IL is about 214.8 miles (345.7 km), with a travel time of about 03h 18m by car.

  • The straight-line flight distance is about 165.3 miles (266.1 km).
  • For a round trip, plan for roughly 06h 37m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 6:00 AM to 8:00 AM CDT.
Trip Tools

Reverse, save, or send this route

This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
214.83 mi
03h 18m
Flight
165.33 mi
266.08 km direct

This drive is better planned with a longer stop or an overnight stay.

Learn Distance

Choose another destination from Sesser.

Flight Distance

Direct air line
165.33 mi
Kilometers
266.08 km
Flight Time
00h 19m

Driving Distance

Road route
214.83 mi
Kilometers
345.74 km
Drive Time
03h 18m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 03h 18m.

Arrival Snapshot
Arrive in Bloomington
Tue, May 5, 2:41 AM CDT
Return by in Sesser
Tue, May 5, 6:00 AM CDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Sesser
2026-05-04T23:22
Arrive Bloomington
Tue, May 5, 2:41 AM CDT
Route Timing
03h 18m
One way by road
Best Departure Window
6:00 AM to 8:00 AM CDT
Leave early for more breathing room
Arrive between
9:19 AM to 11:19 AM CDT

An early departure helps you fit a real stop into the day without turning the return into a late-night drive.

Leave by
10:22 AM CDT
Keeps a same-day return open with about 04h 00m at the destination.
Back in Sesser
9:00 PM CDT
Early departure recommended

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Ramsey
IL

Village in Illinois, United States

From Sesser
95.6 mi
01h 39m
To Bloomington
119.3 mi
01h 39m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
80°F
Monday

Showers And Thunderstorms Likely then Chance Showers And Thunderstorms

Starts
Mon, May 4 6:00 AM CDT
Wind
8 to 17 mph SSW
Destination
78°F
Monday

Sunny then Chance Showers And Thunderstorms

Starts
Mon, May 4 6:00 AM CDT
Wind
7 to 18 mph SW

Driving Route Map

The map below follows the saved road route between Sesser and Bloomington.

Turn-by-Turn Driving Directions

Step-by-step road directions between Sesser and Bloomington.

  1. 1

    Start on West Franklin Street

    1 km · 57 sec · West Franklin Street

  2. 2

    Continue on Illinois Route 154

    7 mi · 11 min · Illinois Route 154

  3. 3

    Take the ramp left

    1986 ft · 49 sec

  4. 4

    Merge slight left onto Ken Gray Expressway

    18 mi · 20 min · Ken Gray Expressway

  5. 5

    Keep slight right to continue on Ken Gray Expressway

    20.5 mi · 22 min · Ken Gray Expressway

  6. 6

    Take the exit slight right toward US 50: Salem, Sandoval

    2199 ft · 54 sec

  7. 7

    Merge slight left onto West Main Street

    2.4 mi · 3 min · West Main Street

  8. 8

    Continue on East Poplar Street

    2.7 mi · 3 min · East Poplar Street

  9. 9

    Continue on Poplar

    2.7 mi · 3 min · Poplar

  10. 10

    Turn right onto 150E

    10.4 mi · 12 min · 150E

  11. 11

    Continue on 300E

    13.5 mi · 15 min · 300E

  12. 12

    Turn left

    2405 ft · 35 sec

  13. 13

    Turn right onto North Kennedy Boulevard

    1.6 mi · 2 min · North Kennedy Boulevard

  14. 14

    Continue on County Road 875 East

    11.1 mi · 13 min · County Road 875 East

  15. 15

    Continue on South Superior Street

    15.1 mi · 17 min · South Superior Street

  16. 16

    Continue on County Road 2400 East

    2 mi · 3 min · County Road 2400 East

  17. 17

    Continue on Fair Avenue

    3070 ft · 2 min · Fair Avenue

  18. 18

    Continue on South Poplar Street

    2138 ft · 32 sec · South Poplar Street

  19. 19

    Turn right onto East 1st Street

    2150 ft · 1 min · East 1st Street

  20. 20

    Turn left onto Cedar Street

    116 m · 5 sec · Cedar Street

  21. 21

    Turn right onto Jackson Street

    2709 ft · 2 min · Jackson Street

  22. 22

    Continue on North 2600 East Road

    1.6 km · 2 min · North 2600 East Road

  23. 23

    Turn left

    28.7 mi · 33 min

  24. 24

    Take the exit slight right toward Decatur

    2582 ft · 1 min

  25. 25

    Keep slight right to continue on Decatur

    44 m · 4 sec

  26. 26

    Turn straight onto South Business Route 51

    2.6 mi · 4 min · South Business Route 51

  27. 27

    Continue on South Main Street

    769 ft · 19 sec · South Main Street

  28. 28

    Continue on South Franklin Street

    1.6 mi · 3 min · South Franklin Street

  29. 29

    Continue on North Water Street

    27.4 mi · 37 min · North Water Street

  30. 30

    Continue on North 1450 East Road

    17.6 mi · 24 min · North 1450 East Road

  31. 31

    Continue on South East Street

    2717 ft · 1 min · South East Street

  32. 32

    Arrive at your destination

    0 m · 1 sec · North East Street

Car Route Details

A richer read on the saved driving route between Sesser and Bloomington.

OSRM road route
Drive Character

Interchange-aware route

The drive includes several ramps, exits, or merges, so checking the next few maneuvers before busy interchanges is useful.

Directions
32 steps
8 turns on the saved route
Ramps & Exits
5
2 merges, 3 ramps or exits
Navigation Density
14.9 / 100 mi
Decision points by distance
Main Roads
Ken Gray Expressway
38.5 mi · 18%
North Water Street
27.4 mi · 13%
North 1450 East Road
17.6 mi · 8%
South Superior Street
15.1 mi · 7%
300E
13.5 mi · 6%
County Road 875 East
11.1 mi · 5%
Longest Stretch

Longest stretch

Turn left

28.7 mi · 00h 33m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A longer out-and-back drive

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

Drive Time
03h 18m
Long day trip
Same-Day Return
06h 38m
Round-trip wheel time
Road vs Air
+49.5 mi
165.3 mi direct line
Halfway Stop
Ramsey
01h 39m from Sesser
Leave By
10:22 AM CDT
Early departure recommended
Weather Watch

Showers And Thunderstorms Likely then Chance Showers And Thunderstorms leaving Sesser and Sunny then Chance Showers And Thunderstorms near Bloomington.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Sesser to Bloomington?

The road trip is about 214.8 miles (345.7 km) and usually takes 03h 18m in normal driving conditions.

Is this a same-day trip or an overnight route?

This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.

What is the halfway point on this route?

Ramsey is a useful midpoint, sitting about 95.6 miles from Sesser and 119.3 miles from Bloomington.

How much longer is the road route than the straight-line distance?

The direct path is about 165.3 miles (266.1 km), while the road route adds roughly 49.5 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 6:00 AM to 8:00 AM CDT. If you want a more comfortable same-day return, try to leave by 10:22 AM CDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $28.58 one way or $57.17 round trip. Estimated CO2 is about 67.4 kg one way.

What should you check before leaving?

Before you leave, expect Showers And Thunderstorms Likely then Chance Showers And Thunderstorms around Sesser and Sunny then Chance Showers And Thunderstorms near Bloomington.

Stop Ideas Near Ramsey

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Ramsey, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Ramsey.

RAIL

Effingham

49 mi away
401 West National Ave.
RAIL

Carlinville

69 mi away
128 Alton Rd.
RAIL

Centralia station

69 mi away
108 East Broadway
RAIL

Mattoon station

73 mi away
1718 Broadway Ave.

Flight Path Map

This map shows the direct air route between Sesser and Bloomington. Straight-line distance: 165.33 mi (266.08 km).

Sesser

#1 Sesser

City in Franklin County, Illinois, United States

Population1,837
Coordinates38.0917200, -89.0503500
Altitude146
CountryUnited States
Bloomington

#2 Bloomington

The second most populous city in McLean County, Illinois.

Population77,132
Coordinates40.4842000, -88.9936900
Altitude243
CountryUnited States
Start: West Franklin Street (-89.050351, 38.091789)
End: North East Street (-88.993738, 40.484193)

Estimated Travel Time

Distance: 346 km by road

SpeedTime
30 mph (48.3 km/h)07h 09m
40 mph (64.37 km/h)05h 22m
50 mph (80.47 km/h)04h 17m
60 mph (96.56 km/h)03h 34m
70 mph (112.65 km/h)03h 04m
80 mph (129 km/h)02h 40m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
7.58 gal
28.7 L · about $28.58
Round trip
$57.17
15.16 gal · 57.4 L
Estimated CO2
67.4 kg one way
Round trip: 134.7 kg / 297 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $28.58 $57.17
Mid-grade $4.25 $32.24 $64.48
Premium $4.65 $35.28 $70.55
Diesel $5.30 $40.20 $80.41

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Illinois · May 05, 2026

There is no time difference between Sesser and Bloomington. The current time is 23:22:45.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.