How far is Pulaski County, IN from Noblesville, IN?
The driving distance from Pulaski County, IN to Noblesville, IN is about 93.9 miles (151.1 km), with a travel time of about 01h 49m by car.
- The straight-line flight distance is about 77.8 miles (125.2 km).
- For a round trip, plan for roughly 03h 39m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 49m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in Indiana, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Partly Sunny
Driving Route Map
The map below follows the saved road route between Pulaski County and Noblesville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Pulaski County and Noblesville.
-
1
Start on 500 W
1.5 km · 4 min · 500 W
-
2
Turn right
4.9 mi · 9 min
-
3
Turn right onto North Monticello Street
1.1 mi · 2 min · North Monticello Street
-
4
Continue on South Huddleston Road
24.9 mi · 37 min · South Huddleston Road
-
5
Turn left
1488 ft · 31 sec
-
6
Take the ramp straight
1476 ft · 41 sec
-
7
Merge slight left onto Hoosier Heartland Highway
1.1 mi · 1 min · Hoosier Heartland Highway
-
8
Continue on Logansport Bypass
20.8 mi · 30 min · Logansport Bypass
-
9
Take the ramp right
2476 ft · 1 min
-
10
Merge slight left
30.1 mi · 37 min
-
11
Turn right onto East 226th Street
82 m · 10 sec · East 226th Street
-
12
Turn left
98 m · 51 sec
-
13
Continue straight
98 m · 25 sec
-
14
Turn right onto East 226th Street
82 m · 10 sec · East 226th Street
-
15
Turn right
1.1 mi · 1 min
-
16
Take the exit slight right toward SR 38: Sheridan, Noblesville
1822 ft · 51 sec
-
17
Turn left onto Sheridan Avenue
3.5 mi · 5 min · Sheridan Avenue
-
18
Turn right onto Little Chicago Road
1682 ft · 33 sec · Little Chicago Road
-
19
Enter the roundabout and take exit 2 toward Little Chicago Road
37 m · 2 sec · Little Chicago Road
-
20
Exit the roundabout onto Little Chicago Road
1.5 mi · 3 min · Little Chicago Road
-
21
Turn left onto Westfield Road
1.7 mi · 2 min · Westfield Road
-
22
Enter the roundabout and take exit 2 toward the route
41 m · 4 sec
-
23
Exit the roundabout
94 m · 5 sec
-
24
Continue on Westfield Road
3174 ft · 54 sec · Westfield Road
-
25
Enter the roundabout and take exit 2 toward Westfield Road
32 m · 2 sec · Westfield Road
-
26
Exit the roundabout onto Westfield Road
809 ft · 14 sec · Westfield Road
-
27
Enter the roundabout and take exit 1 toward Westfield Road
34 m · 2 sec · Westfield Road
-
28
Exit the roundabout onto Westfield Road
783 ft · 13 sec · Westfield Road
-
29
Continue on West Conner Street
1.2 km · 1 min · West Conner Street
-
30
Arrive at your destination
0 m · 1 sec · East Conner Street
Car Route Details
A richer read on the saved driving route between Pulaski County and Noblesville.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Logansport Bypass
Merge slight left
30.1 mi · 00h 37m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Sunny leaving Pulaski County and Partly Sunny near Noblesville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Pulaski County to Noblesville?
The road trip is about 93.9 miles (151.1 km) and usually takes 01h 49m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Galveston is a useful midpoint, sitting about 47.7 miles from Pulaski County and 46.2 miles from Noblesville.
How much longer is the road route than the straight-line distance?
The direct path is about 77.8 miles (125.2 km), while the road route adds roughly 16.1 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 2:50 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $12.48 one way or $24.96 round trip. Estimated CO2 is about 29.4 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Pulaski County and Partly Sunny near Noblesville.
Stop Ideas Near Galveston
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Galveston.
Lafayette station
Crawfordsville (Bus), Indiana
Crawfordsville
Indianapolis Union Station
Flight Path Map
This map shows the direct air route between Pulaski County and Noblesville. Straight-line distance: 77.79 mi (125.19 km).
#1 Pulaski County
County in Indiana, United States
| Population | 12,388 |
| Coordinates | 41.0418300, -86.6987800 |
| Altitude | 215 |
| Country | United States |
#2 Noblesville
The most populous city in Hamilton County, Indiana.
| Population | 65,835 |
| Coordinates | 40.0455900, -86.0086000 |
| Altitude | 233 |
| Country | United States |
End: Conner Street (-86.0086, 40.045602)
Estimated Travel Time
Distance: 151 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 03h 07m |
| 40 mph (64.37 km/h) | 02h 20m |
| 50 mph (80.47 km/h) | 01h 52m |
| 60 mph (96.56 km/h) | 01h 33m |
| 70 mph (112.65 km/h) | 01h 20m |
| 80 mph (129 km/h) | 01h 10m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $12.48 | $24.96 |
| Mid-grade | $4.25 | $14.08 | $28.15 |
| Premium | $4.65 | $15.40 | $30.81 |
| Diesel | $5.30 | $17.56 | $35.11 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Indiana · Jul 28, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.