How far is Oakwood, TN from Plainview, TN?
The driving distance from Oakwood, TN to Plainview, TN is about 8 miles (12.8 km), with a travel time of about 00h 13m by car.
- The straight-line flight distance is about 5.5 miles (8.8 km).
- For a round trip, plan for roughly 00h 27m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM CDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 13m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Showers And Thunderstorms
Showers And Thunderstorms Likely
Driving Route Map
The map below follows the saved road route between Oakwood and Plainview.
Turn-by-Turn Driving Directions
Step-by-step road directions between Oakwood and Plainview.
-
1
Start on Fieldcrest Drive
153 m · 22 sec · Fieldcrest Drive
-
2
Continue on Oak Meadows Drive
761 ft · 36 sec · Oak Meadows Drive
-
3
Turn right onto Shelbyville Highway
3.4 mi · 4 min · Shelbyville Highway
-
4
Turn left
3.2 mi · 6 min
-
5
Turn straight onto Hoover Gap Road
1.1 mi · 3 min · Hoover Gap Road
-
6
At the end of the road, turn left onto Plainview Road
23 m · 2 sec · Plainview Road
-
7
Arrive at your destination
0 m · 1 sec · Plainview Road
Car Route Details
A richer read on the saved driving route between Oakwood and Plainview.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Shelbyville Highway
Turn right onto Shelbyville Highway
3.39 mi · 00h 04m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Chance Showers And Thunderstorms leaving Oakwood and Showers And Thunderstorms Likely near Plainview.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Oakwood to Plainview?
The road trip is about 8 miles (12.8 km) and usually takes 00h 13m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Bell Buckle is a useful midpoint, sitting about 4 miles from Oakwood and 4 miles from Plainview.
How much longer is the road route than the straight-line distance?
The direct path is about 5.5 miles (8.8 km), while the road route adds roughly 2.5 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM CDT. If you want a more comfortable same-day return, try to leave by 8:02 PM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.06 one way or $2.11 round trip. Estimated CO2 is about 2.5 kg one way.
What should you check before leaving?
Before you leave, expect Chance Showers And Thunderstorms around Oakwood and Showers And Thunderstorms Likely near Plainview.
Stop Ideas Near Bell Buckle
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Bell Buckle.
Nashville, TN
Flight Path Map
This map shows the direct air route between Oakwood and Plainview. Straight-line distance: 5.46 mi (8.78 km).
#1 Oakwood
Oakwood is a place in Tennessee, United States.
| Population | 0 |
| Coordinates | 35.7606200, -86.4069400 |
| Altitude | 201 |
| Country | United States |
#2 Plainview
City in Union County, Tennessee, United States of America
| Population | 2,184 |
| Coordinates | 35.6997900, -86.3449900 |
| Altitude | 214 |
| Country | United States |
End: Plainview Road (-86.345125, 35.699797)
Estimated Travel Time
Distance: 13 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 15m |
| 40 mph (64.37 km/h) | 00h 11m |
| 50 mph (80.47 km/h) | 00h 09m |
| 60 mph (96.56 km/h) | 00h 07m |
| 70 mph (112.65 km/h) | 00h 06m |
| 80 mph (129 km/h) | 00h 05m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $1.06 | $2.11 |
| Mid-grade | $4.25 | $1.19 | $2.38 |
| Premium | $4.65 | $1.30 | $2.61 |
| Diesel | $5.30 | $1.49 | $2.97 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Tennessee · Apr 16, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.