How far is Oakmont, PA from Bensalem, PA?
The driving distance from Oakmont, PA to Bensalem, PA is about 33.8 miles (54.4 km), with a travel time of about 00h 41m by car.
- The straight-line flight distance is about 20.6 miles (33.1 km).
- For a round trip, plan for roughly 01h 22m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 41m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Township in Montgomery County, Pennsylvania
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Oakmont and Bensalem.
Turn-by-Turn Driving Directions
Step-by-step road directions between Oakmont and Bensalem.
-
1
Start on the route
45 m · 14 sec
-
2
Turn right onto Darby Road
756 ft · 27 sec · Darby Road
-
3
Turn left onto East Eagle Road
1 km · 1 min · East Eagle Road
-
4
Turn right onto Lawrence Road
1.1 mi · 2 min · Lawrence Road
-
5
Turn right onto West Chester Pike
855 ft · 20 sec · West Chester Pike
-
6
Take the exit slight right toward I 476 North: Plymouth Meeting
2005 ft · 59 sec
-
7
Merge slight left onto Mid-County Expressway
10.6 mi · 14 min · Mid-County Expressway
-
8
Turn slight left onto Mid-County Expressway
885 ft · 14 sec · Mid-County Expressway
-
9
Continue on Pennsylvania Turnpike Northeast Extension
1657 ft · 22 sec · Pennsylvania Turnpike Northeast Extension
-
10
Take the exit slight right toward I 276 East: New Jersey
2644 ft · 1 min
-
11
Merge slight left onto Pennsylvania Turnpike
17.6 mi · 19 min · Pennsylvania Turnpike
-
12
Take the exit slight right toward PA 132: Street Road
2148 ft · 55 sec
-
13
Turn left onto Street Road
1.7 mi · 3 min · Street Road
-
14
Turn right onto Knights Road
80 m · 9 sec · Knights Road
-
15
Turn right
41 m · 10 sec
-
16
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Oakmont and Bensalem.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Pennsylvania Turnpike
Merge slight left onto Pennsylvania Turnpike
17.6 mi · 00h 19m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Sunny leaving Oakmont and Mostly Sunny near Bensalem.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Oakmont to Bensalem?
The road trip is about 33.8 miles (54.4 km) and usually takes 00h 41m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Whitemarsh is a useful midpoint, sitting about 16.9 miles from Oakmont and 16.9 miles from Bensalem.
How much longer is the road route than the straight-line distance?
The direct path is about 20.6 miles (33.1 km), while the road route adds roughly 13.2 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:08 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $4.86 one way or $9.72 round trip. Estimated CO2 is about 10.6 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Oakmont and Mostly Sunny near Bensalem.
Stop Ideas Near Whitemarsh
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Bluestone Lane City Hall Coffee Shop
Dilworth Park
Philadelphia Marriage License
City Hall
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Whitemarsh.
Ardmore
North Philadelphia station
30th Street Station
Pennsauken, NJ
Flight Path Map
This map shows the direct air route between Oakmont and Bensalem. Straight-line distance: 20.54 mi (33.05 km).
#1 Oakmont
Borough in Allegheny County, Pennsylvania, United States
| Population | 6,563 |
| Coordinates | 39.9870600, -75.3079600 |
| Altitude | 98 |
| Country | United States |
#2 Bensalem
Township in Bucks County, Pennsylvania, United States
| Population | 60,491 |
| Coordinates | 40.1045500, -74.9512800 |
| Altitude | 30 |
| Country | United States |
End: (-74.951388, 40.104613)
Estimated Travel Time
Distance: 54 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 07m |
| 40 mph (64.37 km/h) | 00h 50m |
| 50 mph (80.47 km/h) | 00h 40m |
| 60 mph (96.56 km/h) | 00h 33m |
| 70 mph (112.65 km/h) | 00h 28m |
| 80 mph (129 km/h) | 00h 25m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $4.86 | $9.72 |
| Mid-grade | $4.60 | $5.47 | $10.95 |
| Premium | $4.95 | $5.90 | $11.79 |
| Diesel | $5.98 | $7.12 | $14.23 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Pennsylvania · Apr 18, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.