How far is New York Mills, MN from Pelican Rapids, MN?

The driving distance from New York Mills, MN to Pelican Rapids, MN is about 39 miles (62.7 km), with a travel time of about 00h 46m by car.

  • The straight-line flight distance is about 33.8 miles (54.4 km).
  • For a round trip, plan for roughly 01h 33m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
38.94 mi
00h 46m
Flight
33.79 mi
54.38 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from New York Mills.

Flight Distance

Direct air line
33.79 mi
Kilometers
54.38 km
Flight Time
00h 04m

Driving Distance

Road route
38.94 mi
Kilometers
62.66 km
Drive Time
00h 46m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 00h 46m.

Arrival Snapshot
Arrive in Pelican Rapids
Wed, Apr 15, 2:43 PM CDT
Return by in New York Mills
Wed, Apr 15, 3:30 PM CDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave New York Mills
2026-04-15T13:56
Arrive Pelican Rapids
Wed, Apr 15, 2:43 PM CDT
Route Timing
00h 46m
One way by road
Best Departure Window
8:00 AM to 10:00 AM CDT
Aim for a morning departure
Arrive between
8:47 AM to 10:47 AM CDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
4:56 PM CDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in New York Mills
9:30 PM CDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Dent
MN

City in Otter Tail County, Minnesota, United States

From New York Mills
19.2 mi
00h 23m
To Pelican Rapids
19.8 mi
00h 23m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
33°F
Overnight

Patchy Fog

Starts
Wed, Apr 15 3:00 AM CDT
Wind
2 mph E
Destination
69°F
This Afternoon

Sunny

Starts
Wed, Apr 15 1:00 PM CDT
Wind
10 mph SW

Driving Route Map

The map below follows the saved road route between New York Mills and Pelican Rapids.

Turn-by-Turn Driving Directions

Step-by-step road directions between New York Mills and Pelican Rapids.

  1. 1

    Start on East Centennial 84 Drive

    2456 ft · 1 min · East Centennial 84 Drive

  2. 2

    Continue on West Centennial Drive

    1.3 km · 2 min · West Centennial Drive

  3. 3

    At the end of the road, turn left

    11.2 mi · 13 min

  4. 4

    Take the exit slight right

    1408 ft · 38 sec

  5. 5

    Turn left onto County Highway 34

    72 m · 7 sec · County Highway 34

  6. 6

    Continue on County Road 34

    1 km · 2 min · County Road 34

  7. 7

    Continue on County Highway 34

    5.5 mi · 8 min · County Highway 34

  8. 8

    At the end of the road, turn right onto East Looney Lane

    1723 ft · 27 sec · East Looney Lane

  9. 9

    Continue on County Highway 35

    3.9 mi · 5 min · County Highway 35

  10. 10

    Turn left onto Paul M Osborn Road

    3 mi · 4 min · Paul M Osborn Road

  11. 11

    Continue on 440th Street

    2061 ft · 32 sec · 440th Street

  12. 12

    Continue on 293rd Avenue

    2633 ft · 46 sec · 293rd Avenue

  13. 13

    Turn left onto County Highway 4

    4.7 mi · 8 min · County Highway 4

  14. 14

    Continue on Viking Trail

    1.5 mi · 3 min · Viking Trail

  15. 15

    Continue on Crystal Road

    2.6 mi · 4 min · Crystal Road

  16. 16

    At the end of the road, turn left

    2.5 mi · 3 min

  17. 17

    Turn left onto 1st Avenue Northeast

    56 m · 10 sec · 1st Avenue Northeast

  18. 18

    Turn right

    61 m · 15 sec

  19. 19

    Arrive at your destination

    0 m · 1 sec

Car Route Details

A richer read on the saved driving route between New York Mills and Pelican Rapids.

OSRM road route
Drive Character

Turn-heavy local drive

The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.

Directions
19 steps
8 turns on the saved route
Ramps & Exits
1
0 merges, 1 ramps or exits
Navigation Density
48.8 / 100 mi
Decision points by distance
Main Roads
County Highway 34
5.54 mi · 14%
County Highway 4
4.68 mi · 12%
County Highway 35
3.89 mi · 10%
Paul M Osborn Road
3 mi · 8%
Crystal Road
2.6 mi · 7%
Viking Trail
1.53 mi · 4%
Longest Stretch

Longest stretch

At the end of the road, turn left

11.2 mi · 00h 13m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
00h 46m
Day trip friendly
Same-Day Return
01h 34m
Round-trip wheel time
Road vs Air
+5.2 mi
33.8 mi direct line
Halfway Stop
Dent
00h 23m from New York Mills
Leave By
4:56 PM CDT
Morning start is best
Weather Watch

Patchy Fog leaving New York Mills and Sunny near Pelican Rapids.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from New York Mills to Pelican Rapids?

The road trip is about 39 miles (62.7 km) and usually takes 00h 46m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Dent is a useful midpoint, sitting about 19.2 miles from New York Mills and 19.8 miles from Pelican Rapids.

How much longer is the road route than the straight-line distance?

The direct path is about 33.8 miles (54.4 km), while the road route adds roughly 5.2 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 4:56 PM CDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $4.89 one way or $9.78 round trip. Estimated CO2 is about 12.2 kg one way.

What should you check before leaving?

Before you leave, expect Patchy Fog around New York Mills and Sunny near Pelican Rapids.

Stop Ideas Near Dent

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Dent, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Dent.

RAIL

Detroit Lakes

31 mi away
116 Pioneer Street
RAIL

Staples

74 mi away
First & Fourth Aves
RAIL

Fargo

89 mi away
420 4th Street North

Flight Path Map

This map shows the direct air route between New York Mills and Pelican Rapids. Straight-line distance: 33.79 mi (54.38 km).

Photo coming soon

#1 New York Mills

Human settlement in Otter Tail County, Minnesota, United States of America

Population1,220
Coordinates46.5180200, -95.3761500
Altitude430
CountryUnited States
Pelican Rapids

#2 Pelican Rapids

City in Otter Tail County, Minnesota, United States

Population2,634
Coordinates46.5707900, -96.0831100
Altitude398
CountryUnited States
Start: East Centennial 84 Drive (-95.376115, 46.518067)
End: North Broadway (-96.083568, 46.570796)

Estimated Travel Time

Distance: 63 km by road

SpeedTime
30 mph (48.3 km/h)01h 17m
40 mph (64.37 km/h)00h 58m
50 mph (80.47 km/h)00h 46m
60 mph (96.56 km/h)00h 38m
70 mph (112.65 km/h)00h 33m
80 mph (129 km/h)00h 29m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
1.37 gal
5.2 L · about $4.89
Round trip
$9.78
2.74 gal · 10.4 L
Estimated CO2
12.2 kg one way
Round trip: 24.4 kg / 54 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.57 $4.89 $9.78
Mid-grade $3.92 $5.37 $10.74
Premium $4.39 $6.02 $12.03
Diesel $4.86 $6.66 $13.33

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Minnesota · Apr 15, 2026

There is no time difference between New York Mills and Pelican Rapids. The current time is 13:56:51.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.