How far is Melrose, OH from Jarrett Wood Subdivision, OH?
The driving distance from Melrose, OH to Jarrett Wood Subdivision, OH is about 23.8 miles (38.3 km), with a travel time of about 00h 41m by car.
- The straight-line flight distance is about 18.7 miles (30.1 km).
- For a round trip, plan for roughly 01h 22m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 41m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Village in Ohio
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Sunny
Driving Route Map
The map below follows the saved road route between Melrose and Jarrett Wood Subdivision.
Turn-by-Turn Driving Directions
Step-by-step road directions between Melrose and Jarrett Wood Subdivision.
-
1
Start on Wayne Street
8 mi · 14 min · Wayne Street
-
2
Turn right
3.4 mi · 5 min
-
3
Turn left onto South Williams Street
699 ft · 16 sec · South Williams Street
-
4
Turn right onto West Wayne Street
7.6 mi · 13 min · West Wayne Street
-
5
Turn right
3 mi · 5 min
-
6
Turn left onto Canal Street
116 m · 9 sec · Canal Street
-
7
Turn right onto North Main Street
1224 ft · 30 sec · North Main Street
-
8
Turn left onto West River Street
1.1 km · 1 min · West River Street
-
9
Continue on County Rd 424
2089 ft · 43 sec · County Rd 424
-
10
Turn right onto County Highway C-250
76 m · 13 sec · County Highway C-250
-
11
Turn right onto Township Road 27A
114 m · 17 sec · Township Road 27A
-
12
Continue on Township Road 27A
105 m · 15 sec · Township Road 27A
-
13
Arrive at your destination
0 m · 1 sec · Township Road 27A
Car Route Details
A richer read on the saved driving route between Melrose and Jarrett Wood Subdivision.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Wayne Street
Start on Wayne Street
8.04 mi · 00h 14m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Sunny leaving Melrose and Sunny near Jarrett Wood Subdivision.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Melrose to Jarrett Wood Subdivision?
The road trip is about 23.8 miles (38.3 km) and usually takes 00h 41m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Paulding is a useful midpoint, sitting about 11.9 miles from Melrose and 11.9 miles from Jarrett Wood Subdivision.
How much longer is the road route than the straight-line distance?
The direct path is about 18.7 miles (30.1 km), while the road route adds roughly 5.1 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:08 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $3.11 one way or $6.22 round trip. Estimated CO2 is about 7.5 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Melrose and Sunny near Jarrett Wood Subdivision.
Stop Ideas Near Paulding
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Paulding.
Bryan
Waterloo
Martin Luther King, Jr. Plaza
Flight Path Map
This map shows the direct air route between Melrose and Jarrett Wood Subdivision. Straight-line distance: 18.68 mi (30.07 km).
#1 Melrose
Village in Paulding County, Ohio, United States
| Population | 259 |
| Coordinates | 41.0922700, -84.4196700 |
| Altitude | 216 |
| Country | United States |
#2 Jarrett Wood Subdivision
Jarrett Wood Subdivision is a place in Ohio, United States.
| Population | 0 |
| Coordinates | 41.1778300, -84.7602400 |
| Altitude | 223 |
| Country | United States |
End: Jarrett Wood Subdivision (-84.76024, 41.17783)
Estimated Travel Time
Distance: 38 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 47m |
| 40 mph (64.37 km/h) | 00h 35m |
| 50 mph (80.47 km/h) | 00h 28m |
| 60 mph (96.56 km/h) | 00h 23m |
| 70 mph (112.65 km/h) | 00h 20m |
| 80 mph (129 km/h) | 00h 17m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.71 | $3.11 | $6.22 |
| Mid-grade | $4.24 | $3.56 | $7.13 |
| Premium | $4.79 | $4.02 | $8.05 |
| Diesel | $4.30 | $3.62 | $7.23 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Ohio · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.