How far is Matthews, NC from Asheville, NC?

The driving distance from Matthews, NC to Asheville, NC is about 147.4 miles (237.2 km), with a travel time of about 02h 23m by car.

  • The straight-line flight distance is about 108.4 miles (174.5 km).
  • For a round trip, plan for roughly 04h 46m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
147.39 mi
02h 23m
Flight
108.42 mi
174.49 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Matthews.

Flight Distance

Direct air line
108.42 mi
Kilometers
174.49 km
Flight Time
00h 13m

Driving Distance

Road route
147.39 mi
Kilometers
237.2 km
Drive Time
02h 23m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 23m.

Arrival Snapshot
Arrive in Asheville
Wed, Apr 22, 8:25 PM EDT
Return by in Matthews
Wed, Apr 22, 10:48 PM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Matthews
2026-04-22T18:02
Arrive Asheville
Wed, Apr 22, 8:25 PM EDT
Route Timing
02h 23m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:23 AM to 12:23 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
1:44 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Matthews
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Ellenboro
NC

Human settlement in Rutherford County, North Carolina, United States of America

From Matthews
68 mi
01h 11m
To Asheville
79.3 mi
01h 11m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
83°F
Wednesday

Sunny

Starts
Wed, Apr 22 6:00 AM EDT
Wind
7 to 12 mph SW
Destination
79°F
Wednesday

Sunny

Starts
Wed, Apr 22 6:00 AM EDT
Wind
2 to 12 mph WNW

Driving Route Map

The map below follows the saved road route between Matthews and Asheville.

Turn-by-Turn Driving Directions

Step-by-step road directions between Matthews and Asheville.

  1. 1

    Start on North Freemont Street

    4 m · 6 sec · North Freemont Street

  2. 2

    Turn left onto West John Street

    149 m · 24 sec · West John Street

  3. 3

    Turn left onto North Trade Street

    2622 ft · 1 min · North Trade Street

  4. 4

    Continue on Sam Newell Road

    1.1 mi · 2 min · Sam Newell Road

  5. 5

    Turn left onto East Independence Boulevard

    3.4 mi · 5 min · East Independence Boulevard

  6. 6

    Continue on East Independence Expressway

    5.4 mi · 7 min · East Independence Expressway

  7. 7

    Continue on East Independence Boulevard

    1.1 km · 45 sec · East Independence Boulevard

  8. 8

    Merge slight left onto John Belk Freeway

    2.3 mi · 3 min · John Belk Freeway

  9. 9

    Take the exit straight toward NC 27: Freedom Drive

    2.5 mi · 4 min

  10. 10

    Take the ramp slight left

    1678 ft · 41 sec

  11. 11

    Merge slight left

    24.1 mi · 30 min

  12. 12

    Take the exit slight right toward US 74 West: Kings Mountain, Shelby

    3242 ft · 50 sec

  13. 13

    Continue on Senator J. Ollie Harris Highway

    7.6 mi · 9 min · Senator J. Ollie Harris Highway

  14. 14

    Continue on Andrew Jackson Highway

    1.8 mi · 3 min · Andrew Jackson Highway

  15. 15

    Continue on East Dixon Boulevard

    12 mi · 17 min · East Dixon Boulevard

  16. 16

    Take the ramp straight toward West Dixon Boulevard

    15.7 mi · 18 min · West Dixon Boulevard

  17. 17

    Continue on Lieutenant Governor Walter H Dalton Highway

    18.3 mi · 20 min · Lieutenant Governor Walter H Dalton Highway

  18. 18

    Merge slight left onto Andrew Jackson Highway

    37.8 mi · 46 min · Andrew Jackson Highway

  19. 19

    Take the exit slight right toward Westgate

    920 ft · 16 sec

  20. 20

    Turn straight onto Patton Avenue

    821 ft · 14 sec · Patton Avenue

  21. 21

    Take the ramp straight toward Westgate

    48 m · 3 sec

  22. 22

    Merge slight left onto Billy Graham Freeway

    1.4 mi · 2 min · Billy Graham Freeway

  23. 23

    Take the exit slight right toward US 25

    693 ft · 17 sec

  24. 24

    Turn slight right

    42 m · 4 sec

  25. 25

    Turn right onto Merrimon Avenue

    534 ft · 27 sec · Merrimon Avenue

  26. 26

    Turn left onto Marcellus Street

    40 m · 8 sec · Marcellus Street

  27. 27

    Turn right

    14 m · 3 sec

  28. 28

    Arrive at your destination

    0 m · 1 sec

Car Route Details

A richer read on the saved driving route between Matthews and Asheville.

OSRM road route
Drive Character

Interchange-aware route

The drive includes several ramps, exits, or merges, so checking the next few maneuvers before busy interchanges is useful.

Directions
28 steps
8 turns on the saved route
Ramps & Exits
11
4 merges, 7 ramps or exits
Navigation Density
19 / 100 mi
Decision points by distance
Main Roads
Andrew Jackson Highway
39.6 mi · 27%
NC 27
26.9 mi · 18%
Lieutenant Governor Walter H Dalton Highway
18.3 mi · 12%
West Dixon Boulevard
15.7 mi · 11%
East Dixon Boulevard
12 mi · 8%
Senator J. Ollie Harris Highway
7.61 mi · 5%
Longest Stretch

Andrew Jackson Highway

Merge slight left onto Andrew Jackson Highway

37.8 mi · 00h 46m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 23m
Day trip friendly
Same-Day Return
04h 46m
Round-trip wheel time
Road vs Air
+39 mi
108.4 mi direct line
Halfway Stop
Ellenboro
01h 11m from Matthews
Leave By
1:44 PM EDT
Morning start is best
Weather Watch

Sunny leaving Matthews and Sunny near Asheville.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Matthews to Asheville?

The road trip is about 147.4 miles (237.2 km) and usually takes 02h 23m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Ellenboro is a useful midpoint, sitting about 68 miles from Matthews and 79.3 miles from Asheville.

How much longer is the road route than the straight-line distance?

The direct path is about 108.4 miles (174.5 km), while the road route adds roughly 39 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 1:44 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $20.60 one way or $41.19 round trip. Estimated CO2 is about 46.2 kg one way.

What should you check before leaving?

Before you leave, expect Sunny around Matthews and Sunny near Asheville.

Stop Ideas Near Ellenboro

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
These suggestions come from reviewed places and nearby services around Ellenboro and the surrounding midpoint area.
Downtown Shelby Fountain Park
Scenic stop 11.7 mi away

Downtown Shelby Fountain Park

Shelby , NC
17876, Shelby, NC 28150, United States
Rating 3.5/5 2 reviews Park
Shelby City Hall
Meeting point 11.8 mi away

Shelby City Hall

Shelby , NC
300 S Washington St, Shelby, NC 28150
Rating 2.9/5 12 reviews City government office,City administration,City Hall
Stop photo coming soon
Nearby stop 12.3 mi away

Chesnee City Hall

Chesnee , SC
201 W Cherokee St, Chesnee, SC 29323
Rating 4.0/5 3 reviews Fire station

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Ellenboro.

RAIL

Spartanburg

45 mi away
290 Magnolia St
RAIL

Gastonia

54 mi away
350 Hancock Street
RAIL

Greenville

79 mi away
1120 West Washington Street
RAIL

Charlotte

85 mi away
1914 North Tryon St.

Flight Path Map

This map shows the direct air route between Matthews and Asheville. Straight-line distance: 108.42 mi (174.49 km).

Matthews

#1 Matthews

Town in North Carolina, United States

Population33,718
Coordinates35.1168100, -80.7236800
Altitude222
CountryUnited States
Asheville

#2 Asheville

The most populous city in Buncombe County, North Carolina.

Population92,852
Coordinates35.6009500, -82.5540200
Altitude649
CountryUnited States
Start: West John Street (-80.723706, 35.116781)
End: (-82.554029, 35.600953)

Estimated Travel Time

Distance: 237 km by road

SpeedTime
30 mph (48.3 km/h)04h 54m
40 mph (64.37 km/h)03h 41m
50 mph (80.47 km/h)02h 56m
60 mph (96.56 km/h)02h 27m
70 mph (112.65 km/h)02h 06m
80 mph (129 km/h)01h 50m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
5.2 gal
19.69 L · about $20.60
Round trip
$41.19
10.4 gal · 39.38 L
Estimated CO2
46.2 kg one way
Round trip: 92.4 kg / 204 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.96 $20.60 $41.19
Mid-grade $4.43 $23.03 $46.06
Premium $4.78 $24.85 $49.69
Diesel $5.62 $29.24 $58.49

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in North Carolina · Apr 22, 2026

There is no time difference between Matthews and Asheville. The current time is 18:02:30.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.