How far is Macon, GA from Lumber City, GA?
The driving distance from Macon, GA to Lumber City, GA is about 97.1 miles (156.2 km), with a travel time of about 02h 01m by car.
- The straight-line flight distance is about 84 miles (135.2 km).
- For a round trip, plan for roughly 04h 03m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 01m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in and the county seat of Laurens County, Georgia, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Driving Route Map
The map below follows the saved road route between Macon and Lumber City.
Turn-by-Turn Driving Directions
Step-by-step road directions between Macon and Lumber City.
-
1
Start on Mulberry Street
23 m · 3 sec · Mulberry Street
-
2
Continue on Spring Street
1090 ft · 37 sec · Spring Street
-
3
Turn right onto Riverside Drive
1 km · 1 min · Riverside Drive
-
4
Turn left onto Martin Luther King Junior Boulevard
829 ft · 32 sec · Martin Luther King Junior Boulevard
-
5
Take the ramp right toward I 16 East: Savannah
800 ft · 20 sec
-
6
Merge slight left onto Jim Gillis Historic Savannah Parkway
48.6 mi · 52 min · Jim Gillis Historic Savannah Parkway
-
7
Take the exit slight right toward US 319, US 441: Dublin, McRae
1021 ft · 25 sec
-
8
Turn right
28.5 mi · 39 min
-
9
Take the exit slight right
100 m · 9 sec
-
10
Merge slight left
1.6 mi · 3 min
-
11
Turn left onto East Oak Street
1.6 mi · 3 min · East Oak Street
-
12
Continue on East Golden Isles Highway
15.2 mi · 21 min · East Golden Isles Highway
-
13
Turn right onto Victoria Street
12 m · 2 sec · Victoria Street
-
14
Arrive at your destination
0 m · 1 sec · Victoria Street
Car Route Details
A richer read on the saved driving route between Macon and Lumber City.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Jim Gillis Historic Savannah Parkway
Merge slight left onto Jim Gillis Historic Savannah Parkway
48.6 mi · 00h 52m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Sunny leaving Macon and Sunny near Lumber City.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Macon to Lumber City?
The road trip is about 97.1 miles (156.2 km) and usually takes 02h 01m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Dublin is a useful midpoint, sitting about 48.5 miles from Macon and 48.5 miles from Lumber City.
How much longer is the road route than the straight-line distance?
The direct path is about 84 miles (135.2 km), while the road route adds roughly 13.1 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 2:26 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $13.55 one way or $27.09 round trip. Estimated CO2 is about 30.4 kg one way.
What should you check before leaving?
Before you leave, expect Sunny around Macon and Sunny near Lumber City.
Flight Path Map
This map shows the direct air route between Macon and Lumber City. Straight-line distance: 84 mi (135.18 km).
#1 Macon
The second most populous city in Georgia.
| Population | 152,663 |
| Coordinates | 32.8406900, -83.6324000 |
| Altitude | 112 |
| Country | United States |
#2 Lumber City
City in Telfair County, Georgia, United States of America
| Population | 1,257 |
| Coordinates | 31.9293500, -82.6795800 |
| Altitude | 43 |
| Country | United States |
End: Lumber City (-82.67958, 31.92935)
Estimated Travel Time
Distance: 156 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 03h 13m |
| 40 mph (64.37 km/h) | 02h 25m |
| 50 mph (80.47 km/h) | 01h 56m |
| 60 mph (96.56 km/h) | 01h 37m |
| 70 mph (112.65 km/h) | 01h 23m |
| 80 mph (129 km/h) | 01h 12m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.96 | $13.55 | $27.09 |
| Mid-grade | $4.43 | $15.15 | $30.29 |
| Premium | $4.78 | $16.34 | $32.68 |
| Diesel | $5.62 | $19.23 | $38.47 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Georgia · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.