How far is Lumber City, GA from Savannah, GA?
The driving distance from Lumber City, GA to Savannah, GA is about 106.1 miles (170.7 km), with a travel time of about 02h 00m by car.
- The straight-line flight distance is about 93.1 miles (149.9 km).
- For a round trip, plan for roughly 04h 01m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 00m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
County seat in Evans County, Georgia, USA
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Cloudy
Driving Route Map
The map below follows the saved road route between Lumber City and Savannah.
Turn-by-Turn Driving Directions
Step-by-step road directions between Lumber City and Savannah.
-
1
Start on Victoria Street
12 m · 2 sec · Victoria Street
-
2
Continue straight
2.2 mi · 3 min
-
3
Turn right onto Bells Ferry Road
6.9 mi · 12 min · Bells Ferry Road
-
4
Continue on South Old River Road
7.4 mi · 13 min · South Old River Road
-
5
Turn left onto Hitchcock Road
2 mi · 5 min · Hitchcock Road
-
6
At the end of the road, turn right
18.6 mi · 33 min
-
7
Turn right onto West Brazell Street
37.8 mi · 57 min · West Brazell Street
-
8
Continue straight
4.6 mi · 7 min
-
9
Keep slight right
812 ft · 16 sec
-
10
Take the exit slight right toward I-16 East: Savannah
1601 ft · 39 sec
-
11
Merge slight left onto Jim Gillis Historic Savannah Parkway
22.6 mi · 25 min · Jim Gillis Historic Savannah Parkway
-
12
Keep slight left to continue on Jim Gillis Historic Savannah Parkway
3222 ft · 53 sec · Jim Gillis Historic Savannah Parkway
-
13
Keep slight right to continue on Martin Luther King Junior Boulevard
680 ft · 24 sec
-
14
Turn left onto Martin Luther King Junior Boulevard
1.3 km · 2 min · Martin Luther King Junior Boulevard
-
15
Turn left onto West Bay Street
1124 ft · 22 sec · West Bay Street
-
16
Turn uturn
36 m · 12 sec
-
17
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Lumber City and Savannah.
Straightforward drive
The saved road route has a manageable number of maneuvers and should be easy to follow with normal attention to signs.
West Brazell Street
Turn right onto West Brazell Street
37.8 mi · 00h 57m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Cloudy leaving Lumber City and Cloudy near Savannah.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Lumber City to Savannah?
The road trip is about 106.1 miles (170.7 km) and usually takes 02h 00m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Claxton is a useful midpoint, sitting about 52.1 miles from Lumber City and 53.9 miles from Savannah.
How much longer is the road route than the straight-line distance?
The direct path is about 93.1 miles (149.9 km), while the road route adds roughly 13 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 2:28 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $14.81 one way or $29.63 round trip. Estimated CO2 is about 33.2 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Lumber City and Cloudy near Savannah.
Stop Ideas Near Claxton
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Claxton.
Jesup
Savannah
Yemassee
Flight Path Map
This map shows the direct air route between Lumber City and Savannah. Straight-line distance: 93.17 mi (149.94 km).
#1 Lumber City
City in Telfair County, Georgia, United States of America
| Population | 1,257 |
| Coordinates | 31.9293500, -82.6795800 |
| Altitude | 43 |
| Country | United States |
#2 Savannah
The second most populous city in Georgia.
| Population | 143,632 |
| Coordinates | 32.0835400, -81.0998300 |
| Altitude | 6 |
| Country | United States |
End: (-81.099864, 32.083447)
Estimated Travel Time
Distance: 171 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 03h 32m |
| 40 mph (64.37 km/h) | 02h 39m |
| 50 mph (80.47 km/h) | 02h 07m |
| 60 mph (96.56 km/h) | 01h 46m |
| 70 mph (112.65 km/h) | 01h 30m |
| 80 mph (129 km/h) | 01h 19m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.96 | $14.81 | $29.63 |
| Mid-grade | $4.43 | $16.56 | $33.13 |
| Premium | $4.78 | $17.87 | $35.74 |
| Diesel | $5.62 | $21.03 | $42.07 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Georgia · May 12, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.