How far is Howard, IN from Evansville, IN?
The driving distance from Howard, IN to Evansville, IN is about 151.8 miles (244.3 km), with a travel time of about 02h 52m by car.
- The straight-line flight distance is about 134.5 miles (216.4 km).
- For a round trip, plan for roughly 05h 44m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EST.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 02h 52m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Human settlement in Sullivan County, Indiana, United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Widespread Frost then Sunny
Driving Route Map
The map below follows the saved road route between Howard and Evansville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Howard and Evansville.
-
1
Start on County Road 1025N
128 m · 23 sec · County Road 1025N
-
2
Turn left
876 ft · 43 sec
-
3
Turn left
527 ft · 23 sec
-
4
Continue on Melon Road
1 mi · 4 min · Melon Road
-
5
Turn left onto County Road 1125N
1345 ft · 59 sec · County Road 1125N
-
6
Continue on County Road 780W
1296 ft · 57 sec · County Road 780W
-
7
Continue on County Road 249
626 ft · 29 sec · County Road 249
-
8
Turn right onto County Road 790W
2697 ft · 2 min · County Road 790W
-
9
Continue on County Road 1200N
1.5 km · 4 min · County Road 1200N
-
10
Continue on Perry Street
610 ft · 29 sec · Perry Street
-
11
Turn right
619 ft · 33 sec
-
12
Turn left
2.4 mi · 4 min
-
13
Turn left
33.6 mi · 43 min
-
14
Continue straight
57.7 mi · 1 hr 17 min
-
15
Take the exit slight right
1162 ft · 28 sec
-
16
Merge slight left
1.5 km · 1 min
-
17
Keep slight right
52 mi · 1 hr 5 min
-
18
Turn right onto East Walnut Street
1.1 km · 1 min · East Walnut Street
-
19
Turn right
101 m · 26 sec
-
20
At the end of the road, turn right
37 m · 9 sec
-
21
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Howard and Evansville.
Straightforward drive
The saved road route has a manageable number of maneuvers and should be easy to follow with normal attention to signs.
Perry Street
Continue straight
57.7 mi · 01h 17m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Patchy Fog leaving Howard and Widespread Frost then Sunny near Evansville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Howard to Evansville?
The road trip is about 151.8 miles (244.3 km) and usually takes 02h 52m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Carlisle is a useful midpoint, sitting about 75.7 miles from Howard and 76.1 miles from Evansville.
How much longer is the road route than the straight-line distance?
The direct path is about 134.5 miles (216.4 km), while the road route adds roughly 17.3 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EST. If you want a more comfortable same-day return, try to leave by 12:46 PM EST.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $19.73 one way or $39.46 round trip. Estimated CO2 is about 47.6 kg one way.
Do you cross a time zone on this route?
Yes. There is about a 1 hour time difference between Howard and Evansville, so arrival and return times should be read in local time.
What should you check before leaving?
Before you leave, expect Patchy Fog around Howard and Widespread Frost then Sunny near Evansville.
Stop Ideas Near Carlisle
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Carlisle.
Effingham
Mattoon station
Evansville, IN
Flight Path Map
This map shows the direct air route between Howard and Evansville. Straight-line distance: 134.48 mi (216.43 km).
#1 Howard
Unincorporated town in Liberty Township, Parke County, Indiana, USA
| Population | 340 |
| Coordinates | 39.9161500, -87.3755700 |
| Altitude | 169 |
| Country | United States |
#2 Evansville
The second most populous city in Indiana.
| Population | 118,407 |
| Coordinates | 37.9747600, -87.5558500 |
| Altitude | 118 |
| Country | United States |
End: (-87.555857, 37.974553)
Estimated Travel Time
Distance: 244 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 05h 03m |
| 40 mph (64.37 km/h) | 03h 47m |
| 50 mph (80.47 km/h) | 03h 02m |
| 60 mph (96.56 km/h) | 02h 31m |
| 70 mph (112.65 km/h) | 02h 10m |
| 80 mph (129 km/h) | 01h 53m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.68 | $19.73 | $39.46 |
| Mid-grade | $4.29 | $22.99 | $45.99 |
| Premium | $4.82 | $25.82 | $51.65 |
| Diesel | $6.68 | $35.81 | $71.62 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Indiana · Nov 07, 2026