How far is Hillview, KY from Georgetown, KY?
The driving distance from Hillview, KY to Georgetown, KY is about 246.6 miles (396.8 km), with a travel time of about 04h 08m by car.
- The straight-line flight distance is about 165.7 miles (266.6 km).
- For a round trip, plan for roughly 08h 17m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 04h 08m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Kentucky, US
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Showers And Thunderstorms
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Hillview and Georgetown.
Turn-by-Turn Driving Directions
Step-by-step road directions between Hillview and Georgetown.
-
1
Start on Beechland Road
114 m · 22 sec · Beechland Road
-
2
Turn left onto Summit Drive
699 ft · 33 sec · Summit Drive
-
3
Turn right onto South Steedland Drive
2048 ft · 2 min · South Steedland Drive
-
4
Turn left onto Summers Drive
950 ft · 43 sec · Summers Drive
-
5
Turn right onto Morning Side Drive
1384 ft · 1 min · Morning Side Drive
-
6
Turn right onto John Harper Highway
1.4 km · 1 min · John Harper Highway
-
7
Take the ramp left
1933 ft · 48 sec
-
8
Merge slight left onto Kentucky Turnpike
9.1 mi · 10 min · Kentucky Turnpike
-
9
Take the exit slight right toward KY 245: Bardstown, Clermont
1749 ft · 43 sec
-
10
Turn straight onto Clermont Road
6.6 mi · 10 min · Clermont Road
-
11
Continue on New Shepherdsville Road
7.9 mi · 12 min · New Shepherdsville Road
-
12
Continue on West John Rowan Boulevard
4.4 mi · 6 min · West John Rowan Boulevard
-
13
At the end of the road, turn left onto Springfield Road
5.9 mi · 7 min · Springfield Road
-
14
Continue on Bardstown Road
9.2 mi · 11 min · Bardstown Road
-
15
Keep slight left
28 m · 2 sec
-
16
Keep slight right
24.3 mi · 28 min
-
17
Turn right onto South Danville Bypass
5.5 mi · 7 min · South Danville Bypass
-
18
Continue on Stanford Road
2 mi · 2 min · Stanford Road
-
19
Continue on Danville Road
29 mi · 34 min · Danville Road
-
20
Continue on South Daniel Boone Trail
2 mi · 3 min · South Daniel Boone Trail
-
21
Take the ramp slight right
1159 ft · 28 sec
-
22
Merge slight left
29.6 mi · 32 min
-
23
Take the exit slight right toward US 25, US 25E: Corbin, Barbourville
1752 ft · 38 sec
-
24
Turn left onto Corbin Bypass
2 mi · 3 min · Corbin Bypass
-
25
Continue on Cumberland Gap Parkway
30.7 mi · 37 min · Cumberland Gap Parkway
-
26
Continue on Bob Madon Bypass
1.8 mi · 3 min · Bob Madon Bypass
-
27
Turn left onto Harlan Road
15.9 mi · 18 min · Harlan Road
-
28
Continue on Pineville Road
13.1 mi · 15 min · Pineville Road
-
29
Turn right
1.1 mi · 2 min
-
30
Turn left
118 m · 10 sec
-
31
Enter the roundabout and take exit 2 toward the route
28 m · 2 sec
-
32
Exit the roundabout
19.6 mi · 34 min
-
33
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Hillview and Georgetown.
Interchange-aware route
The drive includes several ramps, exits, or merges, so checking the next few maneuvers before busy interchanges is useful.
Cumberland Gap Parkway
Continue on Cumberland Gap Parkway
30.7 mi · 00h 37m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Chance Showers And Thunderstorms leaving Hillview and Mostly Sunny near Georgetown.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Hillview to Georgetown?
The road trip is about 246.6 miles (396.8 km) and usually takes 04h 08m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Livingston is a useful midpoint, sitting about 111.4 miles from Hillview and 135.1 miles from Georgetown.
How much longer is the road route than the straight-line distance?
The direct path is about 165.7 miles (266.6 km), while the road route adds roughly 80.9 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 8:42 AM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $32.81 one way or $65.62 round trip. Estimated CO2 is about 77.3 kg one way.
What should you check before leaving?
Before you leave, expect Chance Showers And Thunderstorms around Hillview and Mostly Sunny near Georgetown.
Flight Path Map
This map shows the direct air route between Hillview and Georgetown. Straight-line distance: 165.68 mi (266.64 km).
#1 Hillview
City in Bullitt County, Kentucky, United States of America
| Population | 9,192 |
| Coordinates | 38.0697900, -85.6855100 |
| Altitude | 165 |
| Country | United States |
#2 Georgetown
City in Kentucky
| Population | 35,847 |
| Coordinates | 36.8892600, -83.0551700 |
| Altitude | 495 |
| Country | United States |
End: KY 38 (-83.055148, 36.889287)
Estimated Travel Time
Distance: 397 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 08h 12m |
| 40 mph (64.37 km/h) | 06h 09m |
| 50 mph (80.47 km/h) | 04h 55m |
| 60 mph (96.56 km/h) | 04h 06m |
| 70 mph (112.65 km/h) | 03h 31m |
| 80 mph (129 km/h) | 03h 04m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $32.81 | $65.62 |
| Mid-grade | $4.25 | $37.00 | $74.00 |
| Premium | $4.65 | $40.49 | $80.98 |
| Diesel | $5.30 | $46.14 | $92.29 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Kentucky · May 05, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.