How far is Hillside Lake, NY from Yonkers, NY?
The driving distance from Hillside Lake, NY to Yonkers, NY is about 58.5 miles (94.1 km), with a travel time of about 01h 07m by car.
- The straight-line flight distance is about 47.5 miles (76.5 km).
- For a round trip, plan for roughly 02h 15m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 07m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in New York
Route Weather Snapshot
Check the forecast at both ends before you head out.
Partly Cloudy
Sunny
Driving Route Map
The map below follows the saved road route between Hillside Lake and Yonkers.
Turn-by-Turn Driving Directions
Step-by-step road directions between Hillside Lake and Yonkers.
-
1
Start on 3rd Road
124 m · 23 sec · 3rd Road
-
2
Turn left onto South Hillside Lake Road
1826 ft · 1 min · South Hillside Lake Road
-
3
Turn left onto Hillside Lake Road
1.5 km · 2 min · Hillside Lake Road
-
4
Turn sharp left onto Clove Branch Road
2 mi · 4 min · Clove Branch Road
-
5
Continue on Carpenter Road
1.5 km · 2 min · Carpenter Road
-
6
At the end of the road, turn right onto Taconic State Parkway
36.2 mi · 49 min · Taconic State Parkway
-
7
Take the exit slight right toward Saw Mill Parkway, Yonkers
2588 ft · 44 sec
-
8
Merge slight left onto Saw Mill River Parkway
13.5 mi · 19 min · Saw Mill River Parkway
-
9
Take the exit slight right toward West Yonkers Avenue
776 ft · 21 sec
-
10
Turn slight right onto Yonkers Avenue
1.1 km · 1 min · Yonkers Avenue
-
11
Continue on Nepperhan Avenue
2523 ft · 58 sec · Nepperhan Avenue
-
12
Turn sharp left onto South Broadway
70 m · 6 sec · South Broadway
-
13
Arrive at your destination
0 m · 1 sec · South Broadway
Car Route Details
A richer read on the saved driving route between Hillside Lake and Yonkers.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Taconic State Parkway
At the end of the road, turn right onto Taconic State Parkway
36.2 mi · 00h 49m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Partly Cloudy leaving Hillside Lake and Sunny near Yonkers.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Hillside Lake to Yonkers?
The road trip is about 58.5 miles (94.1 km) and usually takes 01h 07m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Yorktown is a useful midpoint, sitting about 27.9 miles from Hillside Lake and 30.6 miles from Yonkers.
How much longer is the road route than the straight-line distance?
The direct path is about 47.5 miles (76.5 km), while the road route adds roughly 11 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:14 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $9.16 one way or $18.33 round trip. Estimated CO2 is about 18.3 kg one way.
What should you check before leaving?
Before you leave, expect Partly Cloudy around Hillside Lake and Sunny near Yonkers.
Stop Ideas Near Yorktown
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Yorktown.
Croton–Harmon station
Stamford Transportation Center
Yonkers station
New Rochelle station
Flight Path Map
This map shows the direct air route between Hillside Lake and Yonkers. Straight-line distance: 47.52 mi (76.48 km).
#1 Hillside Lake
Census-designated place in Dutchess County, New York
| Population | 1,084 |
| Coordinates | 41.6148200, -73.7981900 |
| Altitude | 114 |
| Country | United States |
#2 Yonkers
The second most populous city in Westchester County, New York.
| Population | 200,040 |
| Coordinates | 40.9312100, -73.8987500 |
| Altitude | 25 |
| Country | United States |
End: South Broadway (-73.89864, 40.931263)
Estimated Travel Time
Distance: 94 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 56m |
| 40 mph (64.37 km/h) | 01h 27m |
| 50 mph (80.47 km/h) | 01h 10m |
| 60 mph (96.56 km/h) | 00h 58m |
| 70 mph (112.65 km/h) | 00h 50m |
| 80 mph (129 km/h) | 00h 43m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.45 | $9.16 | $18.33 |
| Mid-grade | $4.98 | $10.26 | $20.53 |
| Premium | $5.38 | $11.09 | $22.17 |
| Diesel | $6.51 | $13.41 | $26.82 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in New York · Oct 15, 2026