How far is Heath, OH from Strongsville, OH?

The driving distance from Heath, OH to Strongsville, OH is about 162 miles (260.7 km), with a travel time of about 02h 49m by car.

  • The straight-line flight distance is about 108.9 miles (175.2 km).
  • For a round trip, plan for roughly 05h 38m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
161.97 mi
02h 49m
Flight
108.86 mi
175.19 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Heath.

Flight Distance

Direct air line
108.86 mi
Kilometers
175.19 km
Flight Time
00h 13m

Driving Distance

Road route
161.97 mi
Kilometers
260.66 km
Drive Time
02h 49m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 49m.

Arrival Snapshot
Arrive in Strongsville
Thu, Oct 15, 10:40 PM EDT
Return by in Heath
Fri, Oct 16, 1:30 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Heath
2026-10-15T19:51
Arrive Strongsville
Thu, Oct 15, 10:40 PM EDT
Route Timing
02h 49m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:49 AM to 12:49 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
12:52 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Heath
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Loudon
OH

Village in Ashland and Holmes counties in Ohio, United States

From Heath
72.3 mi
01h 24m
To Strongsville
89.7 mi
01h 24m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
72°F
This Afternoon

Mostly Cloudy

Starts
Thu, Oct 15 3:00 PM EDT
Wind
2 mph E
Destination
70°F
Today

Mostly Sunny

Starts
Thu, Oct 15 10:00 AM EDT
Wind
6 mph SE

Driving Route Map

The map below follows the saved road route between Heath and Strongsville.

Turn-by-Turn Driving Directions

Step-by-step road directions between Heath and Strongsville.

  1. 1

    Start on Wegee Road

    1.9 mi · 4 min · Wegee Road

  2. 2

    Turn right

    113 m · 20 sec

  3. 3

    At the end of the road, turn right onto Central Avenue

    1720 ft · 41 sec · Central Avenue

  4. 4

    Take the ramp left

    1198 ft · 29 sec

  5. 5

    Merge slight left

    7.9 mi · 9 min

  6. 6

    Take the exit slight right toward I 70, US 40, US 250: Wheeling, Bridgeport

    761 ft · 22 sec

  7. 7

    Turn right onto North Lincoln Avenue

    1396 ft · 30 sec · North Lincoln Avenue

  8. 8

    Turn left onto Cadiz Pike

    1.2 km · 1 min · Cadiz Pike

  9. 9

    Continue on Sunset Heights Road

    2084 ft · 39 sec · Sunset Heights Road

  10. 10

    Continue on Sunset Heights Road

    2.8 mi · 4 min · Sunset Heights Road

  11. 11

    Continue on Colerain Road

    3.8 mi · 6 min · Colerain Road

  12. 12

    Continue on Pleasant Grove Road

    4.9 mi · 7 min · Pleasant Grove Road

  13. 13

    Continue on Cadiz-Harrisville Road

    8.3 mi · 12 min · Cadiz-Harrisville Road

  14. 14

    Continue on East Market Street

    2.2 mi · 3 min · East Market Street

  15. 15

    Turn slight left onto Deersville Avenue

    1.3 km · 2 min · Deersville Avenue

  16. 16

    Turn right onto Cadiz-Dennison Road

    21.4 mi · 30 min · Cadiz-Dennison Road

  17. 17

    Continue straight

    1.1 mi · 1 min

  18. 18

    Take the exit slight right toward US 250 West, SR 800 North: Uhrichsville, New Philadelphia

    1516 ft · 41 sec

  19. 19

    Turn right onto Water Street

    15.9 mi · 17 min · Water Street

  20. 20

    Take the exit slight right toward US 250: Strasburg, Massillon

    1543 ft · 42 sec

  21. 21

    Turn left onto South Wooster Avenue

    3.2 mi · 4 min · South Wooster Avenue

  22. 22

    Turn left

    22.1 mi · 25 min

  23. 23

    Keep slight right

    5.7 mi · 6 min

  24. 24

    Continue on Burbank Road

    1.2 mi · 2 min · Burbank Road

  25. 25

    Enter the roundabout and take exit 2 toward Burbank Road

    35 m · 1 sec · Burbank Road

  26. 26

    Exit the roundabout onto Burbank Road

    848 ft · 12 sec · Burbank Road

  27. 27

    Enter the roundabout and take exit 1 toward the route

    37 m · 2 sec

  28. 28

    Exit the roundabout

    77 m · 3 sec

  29. 29

    Turn straight onto Burbank Road

    8.9 mi · 10 min · Burbank Road

  30. 30

    Continue on N Front Street

    2168 ft · 30 sec · N Front Street

  31. 31

    Continue on Avon Lake Road

    2505 ft · 56 sec · Avon Lake Road

  32. 32

    Take the exit right toward I 71 North: Cleveland

    1743 ft · 23 sec

  33. 33

    Merge slight left

    16.2 mi · 17 min

  34. 34

    Keep slight left

    10.5 mi · 12 min

  35. 35

    Take the exit slight right toward SR 82: Royalton Road

    1604 ft · 47 sec

  36. 36

    Turn left onto Royalton Road

    1.4 mi · 3 min · Royalton Road

  37. 37

    Arrive at your destination

    0 m · 1 sec · Royalton Road

Car Route Details

A richer read on the saved driving route between Heath and Strongsville.

OSRM road route
Drive Character

Interchange-aware route

The drive includes several ramps, exits, or merges, so checking the next few maneuvers before busy interchanges is useful.

Directions
37 steps
15 turns on the saved route
Ramps & Exits
12
2 merges, 10 ramps or exits
Navigation Density
22.8 / 100 mi
Decision points by distance
Main Roads
I 71 North
27.1 mi · 17%
Cadiz-Dennison Road
22.4 mi · 14%
Water Street
15.9 mi · 10%
Burbank Road
10.4 mi · 6%
South Wooster Avenue
8.9 mi · 5%
Central Avenue
8.44 mi · 5%
Longest Stretch

Longest stretch

Turn left

22.1 mi · 00h 25m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 49m
Day trip friendly
Same-Day Return
05h 38m
Round-trip wheel time
Road vs Air
+53.1 mi
108.9 mi direct line
Halfway Stop
Loudon
01h 24m from Heath
Leave By
12:52 PM EDT
Morning start is best
Weather Watch

Mostly Cloudy leaving Heath and Mostly Sunny near Strongsville.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Heath to Strongsville?

The road trip is about 162 miles (260.7 km) and usually takes 02h 49m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Loudon is a useful midpoint, sitting about 72.3 miles from Heath and 89.7 miles from Strongsville.

How much longer is the road route than the straight-line distance?

The direct path is about 108.9 miles (175.2 km), while the road route adds roughly 53.1 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 12:52 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $21.87 one way or $43.74 round trip. Estimated CO2 is about 50.7 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Cloudy around Heath and Mostly Sunny near Strongsville.

Stop Ideas Near Loudon

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Loudon, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Loudon.

RAIL

Alliance

52 mi away
820 East Main Street
RAIL

Elyria

102 mi away
410 East River Road
RAIL

Cleveland Lakefront station

105 mi away
200 Cleveland Memorial Shoreway

Flight Path Map

This map shows the direct air route between Heath and Strongsville. Straight-line distance: 108.86 mi (175.19 km).

Photo coming soon

#1 Heath

City in Ohio, USA

Population11,035
Coordinates39.9561800, -80.7837000
Altitude221
CountryUnited States
Strongsville

#2 Strongsville

A city in Cuyahoga County, Ohio.

Population44,481
Coordinates41.3145000, -81.8356900
Altitude284
CountryUnited States
Start: Wegee Road (-80.783614, 39.956344)
End: Royalton Road (-81.835537, 41.314183)

Estimated Travel Time

Distance: 261 km by road

SpeedTime
30 mph (48.3 km/h)05h 23m
40 mph (64.37 km/h)04h 02m
50 mph (80.47 km/h)03h 14m
60 mph (96.56 km/h)02h 41m
70 mph (112.65 km/h)02h 18m
80 mph (129 km/h)02h 01m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
5.71 gal
21.63 L · about $21.87
Round trip
$43.74
11.42 gal · 43.26 L
Estimated CO2
50.7 kg one way
Round trip: 101.5 kg / 224 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.83 $21.87 $43.74
Mid-grade $4.38 $25.03 $50.05
Premium $4.93 $28.13 $56.27
Diesel $6.07 $34.65 $69.30

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Ohio · Oct 15, 2026

There is no time difference between Heath and Strongsville. The current time is 19:51:24.

Distance to Other Cities

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.