How far is Gilmanton Ironworks, NH from Holderness, NH?
The driving distance from Gilmanton Ironworks, NH to Holderness, NH is about 38.7 miles (62.3 km), with a travel time of about 00h 58m by car.
- The straight-line flight distance is about 26.2 miles (42.1 km).
- For a round trip, plan for roughly 01h 56m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM EST.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 58m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in New Hampshire
Route Weather Snapshot
Check the forecast at both ends before you head out.
Light Rain
Patchy Fog
Driving Route Map
The map below follows the saved road route between Gilmanton Ironworks and Holderness.
Turn-by-Turn Driving Directions
Step-by-step road directions between Gilmanton Ironworks and Holderness.
-
1
Start on Elm Street
111 m · 14 sec · Elm Street
-
2
Turn left onto New Hampshire Route 140
8.6 mi · 15 min · New Hampshire Route 140
-
3
Continue on Gilmanton Road
1.9 mi · 3 min · Gilmanton Road
-
4
Continue on State Route 140
1135 ft · 36 sec · State Route 140
-
5
Continue on Main Street
1094 ft · 31 sec · Main Street
-
6
Turn right onto Depot Street
2.9 mi · 5 min · Depot Street
-
7
Continue on Tilton Road
1.8 mi · 3 min · Tilton Road
-
8
Continue on I 93 North
2342 ft · 57 sec
-
9
Merge slight left onto Styles Bridges Highway
17.8 mi · 19 min · Styles Bridges Highway
-
10
Take the exit slight right toward US 3, NH 25: Ashland, Holderness
819 ft · 28 sec
-
11
Keep slight right
86 m · 7 sec
-
12
Turn slight right onto Daniel Webster Highway
118 m · 10 sec · Daniel Webster Highway
-
13
Continue on Main Street
1 km · 2 min · Main Street
-
14
Continue on Riverside Drive
1.5 km · 2 min · Riverside Drive
-
15
Continue on Scenic View Road
1.4 mi · 2 min · Scenic View Road
-
16
Continue on US Route 3
1.4 mi · 3 min · US Route 3
-
17
Turn left onto Squam Lake Road
543 ft · 25 sec · Squam Lake Road
-
18
Turn left
125 m · 30 sec
-
19
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Gilmanton Ironworks and Holderness.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Styles Bridges Highway
Merge slight left onto Styles Bridges Highway
17.8 mi · 00h 19m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Light Rain leaving Gilmanton Ironworks and Patchy Fog near Holderness.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Gilmanton Ironworks to Holderness?
The road trip is about 38.7 miles (62.3 km) and usually takes 00h 58m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Sanbornton is a useful midpoint, sitting about 19.3 miles from Gilmanton Ironworks and 19.4 miles from Holderness.
How much longer is the road route than the straight-line distance?
The direct path is about 26.2 miles (42.1 km), while the road route adds roughly 12.5 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM EST. If you want a more comfortable same-day return, try to leave by 4:34 PM EST.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $5.67 one way or $11.34 round trip. Estimated CO2 is about 12.2 kg one way.
What should you check before leaving?
Before you leave, expect Light Rain around Gilmanton Ironworks and Patchy Fog near Holderness.
Stop Ideas Near Sanbornton
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Sanbornton.
Tilton, New Hampshire
New Hampton, New Hampshire
Concord, New Hampshire
Plymouth, New Hampshire
Flight Path Map
This map shows the direct air route between Gilmanton Ironworks and Holderness. Straight-line distance: 26.18 mi (42.13 km).
#1 Gilmanton Ironworks
Gilmanton Ironworks is a place in New Hampshire, United States.
| Population | 0 |
| Coordinates | 43.4173000, -71.2972900 |
| Altitude | 187 |
| Country | United States |
#2 Holderness
Town in Grafton County, New Hampshire
| Population | 2,131 |
| Coordinates | 43.7320200, -71.5884100 |
| Altitude | 180 |
| Country | United States |
End: Holderness (-71.58841, 43.73202)
Estimated Travel Time
Distance: 62 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 17m |
| 40 mph (64.37 km/h) | 00h 58m |
| 50 mph (80.47 km/h) | 00h 46m |
| 60 mph (96.56 km/h) | 00h 38m |
| 70 mph (112.65 km/h) | 00h 33m |
| 80 mph (129 km/h) | 00h 28m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.14 | $5.67 | $11.34 |
| Mid-grade | $4.75 | $6.51 | $13.02 |
| Premium | $5.22 | $7.14 | $14.29 |
| Diesel | $6.30 | $8.64 | $17.27 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in New Hampshire · Nov 06, 2026