How far is Georgetown, KY from Taylor Mill, KY?
The driving distance from Georgetown, KY to Taylor Mill, KY is about 241.2 miles (388.1 km), with a travel time of about 04h 50m by car.
- The straight-line flight distance is about 165.5 miles (266.3 km).
- For a round trip, plan for roughly 09h 41m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 04h 50m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Human settlement in Rockcastle County, Kentucky, United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Georgetown and Taylor Mill.
Turn-by-Turn Driving Directions
Step-by-step road directions between Georgetown and Taylor Mill.
-
1
Start on the route
19.6 mi · 34 min
-
2
Enter the roundabout and take exit 2 toward the route
27 m · 2 sec
-
3
Exit the roundabout
105 m · 10 sec
-
4
Turn right
1.1 mi · 2 min
-
5
Turn left
29 mi · 33 min
-
6
At the end of the road, turn right
34.4 mi · 43 min
-
7
Take the exit slight right toward I 75 North: Lexington
1811 ft · 24 sec
-
8
Merge slight left
88.3 mi · 1 hr 35 min
-
9
Keep slight right to continue on I 75 North: Cincinnati
53.7 mi · 58 min
-
10
Take the exit slight right toward KY 14, KY 16: Verona, Walton
1301 ft · 35 sec
-
11
Turn right onto Mary Grubbs Highway
1268 ft · 29 sec · Mary Grubbs Highway
-
12
Turn left onto School Road
2475 ft · 1 min · School Road
-
13
Continue on Stephenson Mill Road
1400 ft · 38 sec · Stephenson Mill Road
-
14
Continue on Old Beaver Road
875 ft · 28 sec · Old Beaver Road
-
15
At the end of the road, turn left onto North Main Street
2298 ft · 1 min · North Main Street
-
16
Continue on Dixie Highway
3210 ft · 60 sec · Dixie Highway
-
17
Turn left onto Walton Nicholson Road
2119 ft · 36 sec · Walton Nicholson Road
-
18
Continue on Walton Nicholson Pike
4.1 mi · 6 min · Walton Nicholson Pike
-
19
Continue on Taylor Mill Road
7.1 mi · 12 min · Taylor Mill Road
-
20
Continue on Taylor Mill Road
1.1 km · 1 min · Taylor Mill Road
-
21
Arrive at your destination
0 m · 1 sec · Taylor Mill Road
Car Route Details
A richer read on the saved driving route between Georgetown and Taylor Mill.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
I 75 North
Merge slight left
88.3 mi · 01h 35m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Mostly Sunny leaving Georgetown and Mostly Sunny near Taylor Mill.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Georgetown to Taylor Mill?
The road trip is about 241.2 miles (388.1 km) and usually takes 04h 50m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Brodhead is a useful midpoint, sitting about 120.7 miles from Georgetown and 120.5 miles from Taylor Mill.
How much longer is the road route than the straight-line distance?
The direct path is about 165.5 miles (266.3 km), while the road route adds roughly 75.7 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 7:18 AM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $32.09 one way or $64.18 round trip. Estimated CO2 is about 75.6 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Sunny around Georgetown and Mostly Sunny near Taylor Mill.
Flight Path Map
This map shows the direct air route between Georgetown and Taylor Mill. Straight-line distance: 165.48 mi (266.32 km).
#1 Georgetown
City in Kentucky
| Population | 35,847 |
| Coordinates | 36.8892600, -83.0551700 |
| Altitude | 495 |
| Country | United States |
#2 Taylor Mill
City in Kenton County, Kentucky, United States of America
| Population | 6,820 |
| Coordinates | 38.9975600, -84.4963300 |
| Altitude | 263 |
| Country | United States |
End: Taylor Mill (-84.49633, 38.99756)
Estimated Travel Time
Distance: 388 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 08h 02m |
| 40 mph (64.37 km/h) | 06h 01m |
| 50 mph (80.47 km/h) | 04h 49m |
| 60 mph (96.56 km/h) | 04h 01m |
| 70 mph (112.65 km/h) | 03h 26m |
| 80 mph (129 km/h) | 03h 00m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $32.09 | $64.18 |
| Mid-grade | $4.25 | $36.19 | $72.39 |
| Premium | $4.65 | $39.61 | $79.21 |
| Diesel | $5.30 | $45.14 | $90.27 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Kentucky · Apr 17, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.