How far is Gates Mills, OH from Youngstown, OH?

The driving distance from Gates Mills, OH to Youngstown, OH is about 70 miles (112.7 km), with a travel time of about 01h 13m by car.

  • The straight-line flight distance is about 48.7 miles (78.3 km).
  • For a round trip, plan for roughly 02h 26m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
70.06 mi
01h 13m
Flight
48.62 mi
78.25 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Gates Mills.

Flight Distance

Direct air line
48.62 mi
Kilometers
78.25 km
Flight Time
00h 05m

Driving Distance

Road route
70.06 mi
Kilometers
112.75 km
Drive Time
01h 13m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 01h 13m.

Arrival Snapshot
Arrive in Youngstown
Sat, Apr 18, 11:00 PM EDT
Return by in Gates Mills
Sun, Apr 19, 12:13 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Gates Mills
2026-04-18T21:46
Arrive Youngstown
Sat, Apr 18, 11:00 PM EDT
Route Timing
01h 13m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
9:13 AM to 11:13 AM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
4:04 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Gates Mills
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Shalersville
OH

Township in Portage County, Ohio

From Gates Mills
34.9 mi
00h 36m
To Youngstown
35.2 mi
00h 36m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
75°F
Saturday

Showers And Thunderstorms

Starts
Sat, Apr 18 6:00 AM EDT
Wind
9 to 14 mph S
Destination
80°F
This Afternoon

Showers And Thunderstorms

Starts
Sat, Apr 18 3:00 PM EDT
Wind
14 mph SW

Driving Route Map

The map below follows the saved road route between Gates Mills and Youngstown.

Turn-by-Turn Driving Directions

Step-by-step road directions between Gates Mills and Youngstown.

  1. 1

    Start on Chagrin River Road

    17 m · 2 sec · Chagrin River Road

  2. 2

    Turn right onto Old Mill Road

    1.1 mi · 3 min · Old Mill Road

  3. 3

    Turn right onto West Hill Drive

    108 m · 11 sec · West Hill Drive

  4. 4

    Turn left onto Mayfield Road

    1.1 mi · 3 min · Mayfield Road

  5. 5

    Take the ramp slight right toward I 271 South: Columbus

    1962 ft · 29 sec

  6. 6

    Keep slight left to continue on I 271 South: Columbus

    1865 ft · 33 sec

  7. 7

    Merge slight left onto Outerbelt East Freeway

    6.5 mi · 8 min · Outerbelt East Freeway

  8. 8

    Keep slight left to continue on Outerbelt East Freeway

    4 mi · 5 min · Outerbelt East Freeway

  9. 9

    Keep slight right to continue on Outerbelt East Freeway

    1418 ft · 20 sec · Outerbelt East Freeway

  10. 10

    Continue on Outerbelt East Freeway

    12.1 mi · 14 min · Outerbelt East Freeway

  11. 11

    Turn slight right onto I 80, Ohio Turnpike: Youngstown, Toledo

    2435 ft · 1 min

  12. 12

    Continue straight

    1838 ft · 22 sec

  13. 13

    Merge slight left onto Ohio Turnpike

    30.8 mi · 33 min · Ohio Turnpike

  14. 14

    Take the exit slight right toward I 80 East

    1.4 km · 2 min

  15. 15

    Keep slight left to continue on I 80 East, CR 18: Youngstown, Mahoning Avenue

    1328 ft · 32 sec

  16. 16

    Keep slight left to continue on I 80 East: Youngstown

    4.5 mi · 6 min

  17. 17

    Keep slight right to continue on I 680: Youngstown

    5.9 mi · 8 min

  18. 18

    Take the exit slight right

    1304 ft · 39 sec

  19. 19

    Turn sharp left onto Market Street

    3144 ft · 59 sec · Market Street

  20. 20

    Keep slight right to continue on Central Square

    38 m · 2 sec · Central Square

  21. 21

    Arrive at your destination

    0 m · 1 sec · Central Square

Car Route Details

A richer read on the saved driving route between Gates Mills and Youngstown.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
21 steps
6 turns on the saved route
Ramps & Exits
5
2 merges, 3 ramps or exits
Navigation Density
30 / 100 mi
Decision points by distance
Main Roads
Ohio Turnpike
30.8 mi · 44%
Outerbelt East Freeway
22.9 mi · 33%
I 680
6.14 mi · 9%
I 80 East
5.63 mi · 8%
Old Mill Road
1.11 mi · 2%
Mayfield Road
1.09 mi · 2%
Longest Stretch

Ohio Turnpike

Merge slight left onto Ohio Turnpike

30.8 mi · 00h 33m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
01h 13m
Day trip friendly
Same-Day Return
02h 26m
Round-trip wheel time
Road vs Air
+21.3 mi
48.7 mi direct line
Halfway Stop
Shalersville
00h 36m from Gates Mills
Leave By
4:04 PM EDT
Morning start is best
Weather Watch

Showers And Thunderstorms leaving Gates Mills and Showers And Thunderstorms near Youngstown.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Gates Mills to Youngstown?

The road trip is about 70 miles (112.7 km) and usually takes 01h 13m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Shalersville is a useful midpoint, sitting about 34.9 miles from Gates Mills and 35.2 miles from Youngstown.

How much longer is the road route than the straight-line distance?

The direct path is about 48.7 miles (78.3 km), while the road route adds roughly 21.3 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 4:04 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $9.15 one way or $18.30 round trip. Estimated CO2 is about 22 kg one way.

What should you check before leaving?

Before you leave, expect Showers And Thunderstorms around Gates Mills and Showers And Thunderstorms near Youngstown.

Stop Ideas Near Shalersville

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Shalersville, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Shalersville.

RAIL

Alliance

37 mi away
820 East Main Street
RAIL

Cleveland Lakefront station

49 mi away
200 Cleveland Memorial Shoreway
RAIL

Elyria

74 mi away
410 East River Road

Flight Path Map

This map shows the direct air route between Gates Mills and Youngstown. Straight-line distance: 48.62 mi (78.25 km).

Gates Mills

#1 Gates Mills

Village in Ohio

Population2,206
Coordinates41.5175500, -81.4034500
Altitude219
CountryUnited States
Youngstown

#2 Youngstown

The most populous city in Mahoning County, Ohio.

Population63,828
Coordinates41.0997800, -80.6495200
Altitude259
CountryUnited States
Start: Chagrin River Road (-81.403499, 41.517571)
End: Central Square (-80.649441, 41.09972)

Estimated Travel Time

Distance: 113 km by road

SpeedTime
30 mph (48.3 km/h)02h 20m
40 mph (64.37 km/h)01h 45m
50 mph (80.47 km/h)01h 24m
60 mph (96.56 km/h)01h 10m
70 mph (112.65 km/h)01h 00m
80 mph (129 km/h)00h 52m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
2.47 gal
9.36 L · about $9.15
Round trip
$18.30
4.94 gal · 18.72 L
Estimated CO2
22 kg one way
Round trip: 43.9 kg / 97 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.71 $9.15 $18.30
Mid-grade $4.24 $10.48 $20.96
Premium $4.79 $11.83 $23.66
Diesel $4.30 $10.63 $21.26

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Ohio · Apr 19, 2026

There is no time difference between Gates Mills and Youngstown. The current time is 21:46:49.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.