How far is Dayton, OH from Pulaski, OH?
The driving distance from Dayton, OH to Pulaski, OH is about 136.1 miles (219 km), with a travel time of about 03h 03m by car.
- The straight-line flight distance is about 122.2 miles (196.6 km).
- For a round trip, plan for roughly 06h 07m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 03h 03m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Showers And Thunderstorms
Slight Chance Rain Showers then Mostly Sunny
Driving Route Map
The map below follows the saved road route between Dayton and Pulaski.
Turn-by-Turn Driving Directions
Step-by-step road directions between Dayton and Pulaski.
-
1
Start on South Main Street
757 ft · 30 sec · South Main Street
-
2
Turn left onto West 2nd Street
2417 ft · 1 min · West 2nd Street
-
3
Continue on West 2nd Street
668 ft · 13 sec · West 2nd Street
-
4
Continue on West 1st Street
116 m · 7 sec · West 1st Street
-
5
Continue on Salem Avenue
11.4 mi · 17 min · Salem Avenue
-
6
Take the exit slight right toward SR 49 North: Phillipsburg, Greenville
1806 ft · 44 sec
-
7
Keep slight right to continue on SR 49 North: Phillipsburg, Greenville
19.9 mi · 23 min
-
8
Take the exit right
1374 ft · 38 sec
-
9
Merge slight left
41.2 mi · 51 min
-
10
Continue straight
16.2 mi · 25 min
-
11
Continue straight
1.2 mi · 2 min
-
12
Enter the roundabout and take exit 3 toward the route
65 m · 4 sec
-
13
Exit the roundabout
16.6 mi · 23 min
-
14
Turn right onto North Williams Street
6.5 mi · 10 min · North Williams Street
-
15
Continue straight
14.3 mi · 21 min
-
16
At the end of the road, turn left
1.4 km · 1 min
-
17
Continue straight
3 mi · 4 min
-
18
Turn right
3.5 mi · 4 min
-
19
Arrive at your destination
0 m · 1 sec · High Street
Car Route Details
A richer read on the saved driving route between Dayton and Pulaski.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
SR 49 North
Merge slight left
41.2 mi · 00h 51m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Chance Showers And Thunderstorms leaving Dayton and Slight Chance Rain Showers then Mostly Sunny near Pulaski.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Dayton to Pulaski?
The road trip is about 136.1 miles (219 km) and usually takes 03h 03m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Celina is a useful midpoint, sitting about 68.1 miles from Dayton and 68 miles from Pulaski.
How much longer is the road route than the straight-line distance?
The direct path is about 122.2 miles (196.6 km), while the road route adds roughly 13.9 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 10:52 AM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $17.78 one way or $35.57 round trip. Estimated CO2 is about 42.7 kg one way.
What should you check before leaving?
Before you leave, expect Chance Showers And Thunderstorms around Dayton and Slight Chance Rain Showers then Mostly Sunny near Pulaski.
Stop Ideas Near Celina
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Celina.
Bryan
Waterloo
Connersville station
Flight Path Map
This map shows the direct air route between Dayton and Pulaski. Straight-line distance: 122.16 mi (196.59 km).
#1 Dayton
The ninth most populous city in Ohio.
| Population | 139,907 |
| Coordinates | 39.7589500, -84.1916100 |
| Altitude | 225 |
| Country | United States |
#2 Pulaski
Census-designated place in Williams County, Ohio, United States
| Population | 2,366 |
| Coordinates | 41.5106100, -84.5077300 |
| Altitude | 232 |
| Country | United States |
End: Pulaski (-84.50773, 41.51061)
Estimated Travel Time
Distance: 219 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 04h 32m |
| 40 mph (64.37 km/h) | 03h 24m |
| 50 mph (80.47 km/h) | 02h 43m |
| 60 mph (96.56 km/h) | 02h 16m |
| 70 mph (112.65 km/h) | 01h 56m |
| 80 mph (129 km/h) | 01h 41m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.71 | $17.78 | $35.57 |
| Mid-grade | $4.24 | $20.36 | $40.72 |
| Premium | $4.79 | $22.99 | $45.98 |
| Diesel | $4.30 | $20.66 | $41.32 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Ohio · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.