How far is Dayton, OH from Bethesda, OH?
The driving distance from Dayton, OH to Bethesda, OH is about 183.1 miles (294.7 km), with a travel time of about 03h 26m by car.
- The straight-line flight distance is about 166.3 miles (267.6 km).
- For a round trip, plan for roughly 06h 53m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 03h 26m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Human settlement in Licking County, Ohio, United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Driving Route Map
The map below follows the saved road route between Dayton and Bethesda.
Turn-by-Turn Driving Directions
Step-by-step road directions between Dayton and Bethesda.
-
1
Start on South Main Street
1.3 km · 2 min · South Main Street
-
2
Take the ramp right toward I 75 North, SR 4 North: Toledo, Springfield
43 m · 3 sec
-
3
Keep slight right to continue on SR 4 North: Springfield
1102 ft · 23 sec
-
4
Merge slight left
10.4 mi · 13 min
-
5
Take the exit slight right toward US 70 East, SR 4 North: Columbus
5.8 mi · 7 min
-
6
Keep slight left
49.2 mi · 53 min
-
7
Keep slight right to continue on West Freeway
3.2 mi · 4 min · West Freeway
-
8
Continue on South Innerbelt
1.5 mi · 2 min · South Innerbelt
-
9
Keep slight left to continue on South Innerbelt
2008 ft · 31 sec · South Innerbelt
-
10
Continue on East Freeway
107 mi · 1 hr 57 min · East Freeway
-
11
Take the exit slight right toward SR 149: Belmont, Morristown
1555 ft · 40 sec
-
12
Turn right onto Belmont Morristown Road
2.4 mi · 3 min · Belmont Morristown Road
-
13
At the end of the road, turn right onto Bethesda Belmont Road
1.2 mi · 2 min · Bethesda Belmont Road
-
14
Continue on Maple Avenue
1392 ft · 31 sec · Maple Avenue
-
15
At the end of the road, turn left onto North Main Street
1518 ft · 1 min · North Main Street
-
16
Continue on North Main Street
153 m · 22 sec · North Main Street
-
17
Arrive at your destination
0 m · 1 sec · Main Street
Car Route Details
A richer read on the saved driving route between Dayton and Bethesda.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
East Freeway
Continue on East Freeway
107 mi · 01h 57m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Sunny leaving Dayton and Sunny near Bethesda.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Dayton to Bethesda?
The road trip is about 183.1 miles (294.7 km) and usually takes 03h 26m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Kirkersville is a useful midpoint, sitting about 91.3 miles from Dayton and 91.8 miles from Bethesda.
How much longer is the road route than the straight-line distance?
The direct path is about 166.3 miles (267.6 km), while the road route adds roughly 16.8 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 10:06 AM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $23.93 one way or $47.87 round trip. Estimated CO2 is about 57.4 kg one way.
What should you check before leaving?
Before you leave, expect Sunny around Dayton and Sunny near Bethesda.
Stop Ideas Near Kirkersville
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Kirkersville.
Columbus, OH
Flight Path Map
This map shows the direct air route between Dayton and Bethesda. Straight-line distance: 166.3 mi (267.63 km).
#1 Dayton
The ninth most populous city in Ohio.
| Population | 139,907 |
| Coordinates | 39.7589500, -84.1916100 |
| Altitude | 225 |
| Country | United States |
#2 Bethesda
Village in Belmont County, Ohio USA
| Population | 1,198 |
| Coordinates | 40.0161800, -81.0726000 |
| Altitude | 372 |
| Country | United States |
End: Bethesda (-81.0726, 40.01618)
Estimated Travel Time
Distance: 295 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 06h 06m |
| 40 mph (64.37 km/h) | 04h 34m |
| 50 mph (80.47 km/h) | 03h 39m |
| 60 mph (96.56 km/h) | 03h 03m |
| 70 mph (112.65 km/h) | 02h 36m |
| 80 mph (129 km/h) | 02h 17m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.71 | $23.93 | $47.87 |
| Mid-grade | $4.24 | $27.40 | $54.81 |
| Premium | $4.79 | $30.94 | $61.89 |
| Diesel | $4.30 | $27.80 | $55.61 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Ohio · Jun 03, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.