How far is Danville, PA from McMurray, PA?
The driving distance from Danville, PA to McMurray, PA is about 244.2 miles (393 km), with a travel time of about 04h 13m by car.
- The straight-line flight distance is about 188.1 miles (302.7 km).
- For a round trip, plan for roughly 08h 27m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 6:00 AM to 8:00 AM EDT.
Reverse, save, or send this route
This drive is better planned with a longer stop or an overnight stay. Copy the route link, send it to another device, or print a clean version before you head out.
This drive is better planned with a longer stop or an overnight stay.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 04h 13m.
An early departure helps you fit a real stop into the day without turning the return into a late-night drive.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Borough in Blair County, Pennsylvania, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Rain Showers
Chance Rain Showers
Driving Route Map
The map below follows the saved road route between Danville and McMurray.
Turn-by-Turn Driving Directions
Step-by-step road directions between Danville and McMurray.
-
1
Start on Church Street
12 m · 6 sec · Church Street
-
2
Turn right onto Walnut Street
624 ft · 23 sec · Walnut Street
-
3
Continue on Bloom Street
133 m · 17 sec · Bloom Street
-
4
Continue on Northumberland Street
87 m · 14 sec · Northumberland Street
-
5
Turn right onto Continental Boulevard
2.8 mi · 3 min · Continental Boulevard
-
6
Take the exit slight right
2146 ft · 52 sec
-
7
Merge slight left onto Keystone Shortway
63.1 mi · 1 hr 8 min · Keystone Shortway
-
8
Take the exit slight right toward I 99 South, US 220 South, PA 26: Bellefonte
1410 ft · 54 sec
-
9
Turn left onto Jacksonville Road
24.2 mi · 28 min · Jacksonville Road
-
10
Keep slight left to continue on I 99 South, US 220 South: Port Matilda, Altoona
33.8 mi · 37 min
-
11
Take the exit slight right toward US 22: Ebensburg, Hollidaysburg
1.3 km · 2 min
-
12
Continue straight
2791 ft · 43 sec
-
13
Continue on William Penn Highway
16.5 mi · 19 min · William Penn Highway
-
14
Continue on Admiral Peary Highway
13.4 mi · 19 min · Admiral Peary Highway
-
15
Continue on William Penn Highway
44.8 mi · 1 hr 6 min · William Penn Highway
-
16
Keep slight right to continue on Penn-Lincoln Parkway East
11.8 mi · 16 min · Penn-Lincoln Parkway East
-
17
Take the exit right toward PA 885 South: Glenwood
146 m · 24 sec
-
18
Turn right onto Bates Street
541 ft · 14 sec · Bates Street
-
19
Turn left onto Second Avenue
600 ft · 19 sec · Second Avenue
-
20
Turn right onto Hot Metal Street
2517 ft · 2 min · Hot Metal Street
-
21
At the end of the road, turn left onto East Carson Street
1.2 mi · 3 min · East Carson Street
-
22
Turn right onto Becks Run Road
2.5 mi · 4 min · Becks Run Road
-
23
Continue on Biscayne Drive
1103 ft · 21 sec · Biscayne Drive
-
24
At the end of the road, turn right onto Maytide Street
3107 ft · 55 sec · Maytide Street
-
25
Turn left onto Saw Mill Run Boulevard
836 ft · 28 sec · Saw Mill Run Boulevard
-
26
Take the exit slight right
2.8 mi · 6 min
-
27
Turn right onto Connor Road
1.2 mi · 2 min · Connor Road
-
28
Turn left onto Washington Road
5.5 mi · 10 min · Washington Road
-
29
Turn left onto Valley Brook Ramp
136 m · 17 sec · Valley Brook Ramp
-
30
Continue on Valley Brook Road
1.4 mi · 3 min · Valley Brook Road
-
31
Turn right onto East McMurray Road
128 m · 17 sec · East McMurray Road
-
32
Turn left onto Thomas Road
16 m · 3 sec · Thomas Road
-
33
Arrive at your destination
0 m · 1 sec · Thomas Road
Car Route Details
A richer read on the saved driving route between Danville and McMurray.
Interchange-aware route
The drive includes several ramps, exits, or merges, so checking the next few maneuvers before busy interchanges is useful.
Keystone Shortway
Merge slight left onto Keystone Shortway
63.1 mi · 01h 08m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A longer out-and-back drive
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
Chance Rain Showers leaving Danville and Chance Rain Showers near McMurray.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Danville to McMurray?
The road trip is about 244.2 miles (393 km) and usually takes 04h 13m in normal driving conditions.
Is this a same-day trip or an overnight route?
This is still possible in one day, but it becomes a long driving day. Leaving early and planning your stop window matters more here.
What is the halfway point on this route?
Bellwood is a useful midpoint, sitting about 114.5 miles from Danville and 129.8 miles from McMurray.
How much longer is the road route than the straight-line distance?
The direct path is about 188.1 miles (302.7 km), while the road route adds roughly 56.1 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 6:00 AM to 8:00 AM EDT. If you want a more comfortable same-day return, try to leave by 8:32 AM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $35.22 one way or $70.44 round trip. Estimated CO2 is about 76.6 kg one way.
What should you check before leaving?
Before you leave, expect Chance Rain Showers around Danville and Chance Rain Showers near McMurray.
Stop Ideas Near Bellwood
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Bellwood.
Tyrone
Altoona Transportation Center
Huntingdon
Johnstown
Flight Path Map
This map shows the direct air route between Danville and McMurray. Straight-line distance: 188.1 mi (302.71 km).
#1 Danville
Borough in southern Montour County, Pennsylvania
| Population | 4,595 |
| Coordinates | 40.9634200, -76.6127300 |
| Altitude | 148 |
| Country | United States |
#2 McMurray
Census-designated place in Peters Township, Washington County, Pennsylvania (USA)
| Population | 66,573 |
| Coordinates | 40.2778500, -80.0839400 |
| Altitude | 305 |
| Country | United States |
End: Thomas Road (-80.08396, 40.277824)
Estimated Travel Time
Distance: 393 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 08h 08m |
| 40 mph (64.37 km/h) | 06h 06m |
| 50 mph (80.47 km/h) | 04h 53m |
| 60 mph (96.56 km/h) | 04h 04m |
| 70 mph (112.65 km/h) | 03h 29m |
| 80 mph (129 km/h) | 03h 02m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $35.22 | $70.44 |
| Mid-grade | $4.60 | $39.64 | $79.29 |
| Premium | $4.95 | $42.70 | $85.41 |
| Diesel | $5.98 | $51.55 | $103.10 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Pennsylvania · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.