How far is Dallas, TX from Tool, TX?
The driving distance from Dallas, TX to Tool, TX is about 59.6 miles (95.9 km), with a travel time of about 01h 12m by car.
- The straight-line flight distance is about 51.4 miles (82.7 km).
- For a round trip, plan for roughly 02h 25m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 12m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Kaufman County, Texas, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Chance Showers And Thunderstorms
Chance Showers And Thunderstorms
Driving Route Map
The map below follows the saved road route between Dallas and Tool.
Turn-by-Turn Driving Directions
Step-by-step road directions between Dallas and Tool.
-
1
Start on North Lamar Street
132 m · 14 sec · North Lamar Street
-
2
Turn right onto McKinney Avenue
1118 ft · 25 sec · McKinney Avenue
-
3
Take the ramp slight left toward US 75 North
1229 ft · 30 sec
-
4
Merge slight left onto Woodall Rodgers Freeway
2170 ft · 37 sec · Woodall Rodgers Freeway
-
5
Keep slight right to continue on I 45 South: Houston
2537 ft · 49 sec
-
6
Merge slight left onto Julius Schepps Freeway
3.1 mi · 4 min · Julius Schepps Freeway
-
7
Keep slight right to continue on C F Hawn Freeway
40.4 mi · 44 min · C F Hawn Freeway
-
8
Turn right
1.7 mi · 3 min
-
9
Turn straight
103 m · 12 sec
-
10
Turn slight right onto South State Highway 274
9.7 mi · 14 min · South State Highway 274
-
11
Continue on North Tool Drive
3.3 mi · 5 min · North Tool Drive
-
12
Arrive at your destination
0 m · 1 sec · South Tool Drive
Car Route Details
A richer read on the saved driving route between Dallas and Tool.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
C F Hawn Freeway
Keep slight right to continue on C F Hawn Freeway
40.4 mi · 00h 44m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Chance Showers And Thunderstorms leaving Dallas and Chance Showers And Thunderstorms near Tool.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Dallas to Tool?
The road trip is about 59.6 miles (95.9 km) and usually takes 01h 12m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Crandall is a useful midpoint, sitting about 29.8 miles from Dallas and 29.8 miles from Tool.
How much longer is the road route than the straight-line distance?
The direct path is about 51.4 miles (82.7 km), while the road route adds roughly 8.2 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 4:04 PM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $7.94 one way or $15.87 round trip. Estimated CO2 is about 18.7 kg one way.
What should you check before leaving?
Before you leave, expect Chance Showers And Thunderstorms around Dallas and Chance Showers And Thunderstorms near Tool.
Stop Ideas Near Crandall
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Crandall.
Mesquite, TX
Union Station
Dallas, TX
Fort Worth Central Station
Flight Path Map
This map shows the direct air route between Dallas and Tool. Straight-line distance: 51.39 mi (82.71 km).
#1 Dallas
The ninth most populous city in the United States and the center of the Dallas-Fort Worth metropolitan area.
| Population | 1,343,266 |
| Coordinates | 32.7830600, -96.8066700 |
| Altitude | 128 |
| Country | United States |
#2 Tool
City in Henderson County, Texas, United States
| Population | 2,335 |
| Coordinates | 32.2679200, -96.1702500 |
| Altitude | 104 |
| Country | United States |
End: Tool (-96.17025, 32.26792)
Estimated Travel Time
Distance: 96 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 01h 59m |
| 40 mph (64.37 km/h) | 01h 29m |
| 50 mph (80.47 km/h) | 01h 11m |
| 60 mph (96.56 km/h) | 00h 59m |
| 70 mph (112.65 km/h) | 00h 51m |
| 80 mph (129 km/h) | 00h 44m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.78 | $7.94 | $15.87 |
| Mid-grade | $4.25 | $8.93 | $17.86 |
| Premium | $4.59 | $9.64 | $19.28 |
| Diesel | $3.99 | $8.39 | $16.77 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Texas · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.