How far is Briarly, PA from Bellefonte, PA?
The driving distance from Briarly, PA to Bellefonte, PA is about 7.8 miles (12.6 km), with a travel time of about 00h 14m by car.
- The straight-line flight distance is about 7.5 miles (12.1 km).
- For a round trip, plan for roughly 00h 29m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 14m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Census-designated place in Lancaster County, Pennsylvania
Route Weather Snapshot
Check the forecast at both ends before you head out.
Rain Showers
Rain Showers then Partly Sunny
Driving Route Map
The map below follows the saved road route between Briarly and Bellefonte.
Turn-by-Turn Driving Directions
Step-by-step road directions between Briarly and Bellefonte.
-
1
Start on Buffalo Run Road
6.5 mi · 12 min · Buffalo Run Road
-
2
Continue on West Water Street
3006 ft · 1 min · West Water Street
-
3
Turn left onto Willowbank Street
1630 ft · 41 sec · Willowbank Street
-
4
Turn slight right onto Stoney Batter
765 ft · 18 sec · Stoney Batter
-
5
Turn left onto South Spring Street
1399 ft · 54 sec · South Spring Street
-
6
Turn right onto West Howard Street
154 m · 19 sec · West Howard Street
-
7
Arrive at your destination
0 m · 1 sec · East Howard Street
Car Route Details
A richer read on the saved driving route between Briarly and Bellefonte.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Buffalo Run Road
Start on Buffalo Run Road
6.48 mi · 00h 12m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Rain Showers leaving Briarly and Rain Showers then Partly Sunny near Bellefonte.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Briarly to Bellefonte?
The road trip is about 7.8 miles (12.6 km) and usually takes 00h 14m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Stevens is a useful midpoint, sitting about 3.9 miles from Briarly and 3.9 miles from Bellefonte.
How much longer is the road route than the straight-line distance?
The direct path is about 7.5 miles (12.1 km), while the road route adds roughly 0.3 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 8:00 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.14 one way or $2.29 round trip. Estimated CO2 is about 2.5 kg one way.
What should you check before leaving?
Before you leave, expect Rain Showers around Briarly and Rain Showers then Partly Sunny near Bellefonte.
Stop Ideas Near Stevens
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Stevens.
Lewistown
Tyrone
Huntingdon
Altoona Transportation Center
Flight Path Map
This map shows the direct air route between Briarly and Bellefonte. Straight-line distance: 7.53 mi (12.12 km).
#1 Briarly
Briarly is a place in Pennsylvania, United States.
| Population | 0 |
| Coordinates | 40.8508900, -77.8963900 |
| Altitude | 307 |
| Country | United States |
#2 Bellefonte
County seat of Centre County, Pennsylvania, United States
| Population | 6,188 |
| Coordinates | 40.9133900, -77.7783300 |
| Altitude | 243 |
| Country | United States |
End: North Allegheny Street (-77.778368, 40.913359)
Estimated Travel Time
Distance: 13 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 15m |
| 40 mph (64.37 km/h) | 00h 11m |
| 50 mph (80.47 km/h) | 00h 09m |
| 60 mph (96.56 km/h) | 00h 07m |
| 70 mph (112.65 km/h) | 00h 06m |
| 80 mph (129 km/h) | 00h 05m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $4.09 | $1.14 | $2.29 |
| Mid-grade | $4.60 | $1.29 | $2.58 |
| Premium | $4.95 | $1.39 | $2.77 |
| Diesel | $5.98 | $1.67 | $3.35 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Pennsylvania · Apr 19, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.