How far is Beverly Hills, MI from Cascade, MI?
The driving distance from Beverly Hills, MI to Cascade, MI is about 10.9 miles (17.5 km), with a travel time of about 00h 23m by car.
- The straight-line flight distance is about 7.4 miles (11.9 km).
- For a round trip, plan for roughly 00h 47m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 23m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Marquette County, Michigan, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Rain Showers Likely
Driving Route Map
The map below follows the saved road route between Beverly Hills and Cascade.
Turn-by-Turn Driving Directions
Step-by-step road directions between Beverly Hills and Cascade.
-
1
Start on Maas Street
14 m · 7 sec · Maas Street
-
2
Turn left onto Baldwin Avenue
1 km · 2 min · Baldwin Avenue
-
3
Continue on Brown Avenue
1364 ft · 43 sec · Brown Avenue
-
4
Turn left onto East Main Street
129 m · 13 sec · East Main Street
-
5
Turn right onto South Healy Avenue
766 ft · 24 sec · South Healy Avenue
-
6
Turn left onto County Road 480
7.2 mi · 11 min · County Road 480
-
7
Turn right onto County Road NG
1.2 km · 3 min · County Road NG
-
8
Continue on County Road NC
1.8 mi · 7 min · County Road NC
-
9
Arrive at your destination
0 m · 1 sec
Car Route Details
A richer read on the saved driving route between Beverly Hills and Cascade.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
County Road 480
Turn left onto County Road 480
7.22 mi · 00h 11m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Areas Of Fog leaving Beverly Hills and Rain Showers Likely near Cascade.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Beverly Hills to Cascade?
The road trip is about 10.9 miles (17.5 km) and usually takes 00h 23m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Negaunee is a useful midpoint, sitting about 5.4 miles from Beverly Hills and 5.5 miles from Cascade.
How much longer is the road route than the straight-line distance?
The direct path is about 7.4 miles (11.9 km), while the road route adds roughly 3.5 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:42 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $1.43 one way or $2.87 round trip. Estimated CO2 is about 3.4 kg one way.
What should you check before leaving?
Before you leave, expect Areas Of Fog around Beverly Hills and Rain Showers Likely near Cascade.
Stop Ideas Near Negaunee
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Negaunee.
Marquette, Michigan
L'Anse, MI
Escanaba, Michigan
Houghton, Michigan
Flight Path Map
This map shows the direct air route between Beverly Hills and Cascade. Straight-line distance: 7.39 mi (11.89 km).
#1 Beverly Hills
Town in Oakland County, Michigan, United States
| Population | 10,276 |
| Coordinates | 46.5135500, -87.6068000 |
| Altitude | 427 |
| Country | United States |
#2 Cascade
Cascade is a place in Michigan, United States.
| Population | 0 |
| Coordinates | 46.4468800, -87.4854200 |
| Altitude | 374 |
| Country | United States |
End: Cascade (-87.48542, 46.44688)
Estimated Travel Time
Distance: 17 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 21m |
| 40 mph (64.37 km/h) | 00h 16m |
| 50 mph (80.47 km/h) | 00h 13m |
| 60 mph (96.56 km/h) | 00h 10m |
| 70 mph (112.65 km/h) | 00h 09m |
| 80 mph (129 km/h) | 00h 08m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $1.43 | $2.87 |
| Mid-grade | $4.25 | $1.62 | $3.23 |
| Premium | $4.65 | $1.77 | $3.54 |
| Diesel | $5.30 | $2.02 | $4.03 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Michigan · Apr 15, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.