How far is Bent Creek, NC from High Point, NC?

The driving distance from Bent Creek, NC to High Point, NC is about 167.6 miles (269.7 km), with a travel time of about 02h 47m by car.

  • The straight-line flight distance is about 149.2 miles (240.1 km).
  • For a round trip, plan for roughly 05h 34m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
167.55 mi
02h 47m
Flight
149.19 mi
240.1 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Bent Creek.

Flight Distance

Direct air line
149.19 mi
Kilometers
240.1 km
Flight Time
00h 18m

Driving Distance

Road route
167.55 mi
Kilometers
269.65 km
Drive Time
02h 47m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 47m.

Arrival Snapshot
Arrive in High Point
Mon, May 4, 12:49 AM EDT
Return by in Bent Creek
Mon, May 4, 3:36 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Bent Creek
2026-05-03T22:02
Arrive High Point
Mon, May 4, 12:49 AM EDT
Route Timing
02h 47m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:47 AM to 12:47 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
12:56 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Bent Creek
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Brookford
NC

Human settlement in Catawba County, North Carolina, United States of America

From Bent Creek
83.6 mi
01h 23m
To High Point
83.9 mi
01h 23m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
37°F
Overnight

Mostly Clear

Starts
Sun, May 3 1:00 AM EDT
Wind
6 mph NW
Destination
67°F
Sunday

Sunny

Starts
Sun, May 3 6:00 AM EDT
Wind
7 mph NW

Driving Route Map

The map below follows the saved road route between Bent Creek and High Point.

Turn-by-Turn Driving Directions

Step-by-step road directions between Bent Creek and High Point.

  1. 1

    Start on Sarge Lane

    60 m · 10 sec · Sarge Lane

  2. 2

    Turn left onto Bent Creek Ranch Road

    1776 ft · 1 min · Bent Creek Ranch Road

  3. 3

    At the end of the road, turn left onto Bent Creek Ranch Road

    1412 ft · 41 sec · Bent Creek Ranch Road

  4. 4

    Turn left onto Brevard Road

    3.7 mi · 7 min · Brevard Road

  5. 5

    Take the ramp right

    1121 ft · 27 sec

  6. 6

    Merge slight left

    148.8 mi · 2 hr 50 min

  7. 7

    Take the exit slight right toward I 74 East: High Point

    9.8 mi · 11 min

  8. 8

    Take the exit slight right

    2130 ft · 54 sec

  9. 9

    Continue straight

    1635 ft · 30 sec

  10. 10

    Continue on North Main Street

    3.6 mi · 8 min · North Main Street

  11. 11

    Arrive at your destination

    0 m · 1 sec · South Main Street

Car Route Details

A richer read on the saved driving route between Bent Creek and High Point.

OSRM road route
Drive Character

Straightforward drive

The saved road route has a manageable number of maneuvers and should be easy to follow with normal attention to signs.

Directions
11 steps
3 turns on the saved route
Ramps & Exits
4
1 merges, 3 ramps or exits
Navigation Density
6.6 / 100 mi
Decision points by distance
Main Roads
Brevard Road
153 mi · 91%
I 74 East
10.5 mi · 6%
North Main Street
3.63 mi · 2%
Bent Creek Ranch Road
0.6 mi
Sarge Lane
0.04 mi
Longest Stretch

Brevard Road

Merge slight left

149 mi · 02h 50m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 47m
Day trip friendly
Same-Day Return
05h 34m
Round-trip wheel time
Road vs Air
+18.4 mi
149.2 mi direct line
Halfway Stop
Brookford
01h 23m from Bent Creek
Leave By
12:56 PM EDT
Morning start is best
Weather Watch

Mostly Clear leaving Bent Creek and Sunny near High Point.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Bent Creek to High Point?

The road trip is about 167.6 miles (269.7 km) and usually takes 02h 47m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Brookford is a useful midpoint, sitting about 83.6 miles from Bent Creek and 83.9 miles from High Point.

How much longer is the road route than the straight-line distance?

The direct path is about 149.2 miles (240.1 km), while the road route adds roughly 18.4 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 12:56 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $23.41 one way or $46.82 round trip. Estimated CO2 is about 52.5 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Clear around Bent Creek and Sunny near High Point.

Stop Ideas Near Brookford

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Brookford, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Brookford.

RAIL

Gastonia

51 mi away
350 Hancock Street
RAIL

Kannapolis

69 mi away
201 South Main St.
RAIL

Charlotte

70 mi away
1914 North Tryon St.
RAIL

Salisbury

80 mi away
Depot and Liberty Sts.

Flight Path Map

This map shows the direct air route between Bent Creek and High Point. Straight-line distance: 149.19 mi (240.1 km).

Bent Creek

#1 Bent Creek

Census-designated place in Buncombe County, North Carolina

Population1,287
Coordinates35.5090000, -82.6079000
Altitude671
CountryUnited States
High Point

#2 High Point

The second most populous city in Guilford County, North Carolina.

Population113,565
Coordinates35.9556900, -80.0053200
Altitude281
CountryUnited States
Start: Sarge Lane (-82.607674, 35.508677)
End: South Main Street (-80.005284, 35.955694)

Estimated Travel Time

Distance: 270 km by road

SpeedTime
30 mph (48.3 km/h)05h 34m
40 mph (64.37 km/h)04h 11m
50 mph (80.47 km/h)03h 21m
60 mph (96.56 km/h)02h 47m
70 mph (112.65 km/h)02h 23m
80 mph (129 km/h)02h 05m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
5.91 gal
22.38 L · about $23.41
Round trip
$46.82
11.82 gal · 44.76 L
Estimated CO2
52.5 kg one way
Round trip: 105 kg / 231 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.96 $23.41 $46.82
Mid-grade $4.43 $26.18 $52.35
Premium $4.78 $28.24 $56.48
Diesel $5.62 $33.24 $66.48

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in North Carolina · May 04, 2026

There is no time difference between Bent Creek and High Point. The current time is 22:02:47.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.