How far is Belding, MI from Taylor, MI?

The driving distance from Belding, MI to Taylor, MI is about 147.5 miles (237.4 km), with a travel time of about 02h 24m by car.

  • The straight-line flight distance is about 115.8 miles (186.4 km).
  • For a round trip, plan for roughly 04h 49m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
147.53 mi
02h 24m
Flight
115.81 mi
186.38 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Belding.

Flight Distance

Direct air line
115.81 mi
Kilometers
186.38 km
Flight Time
00h 13m

Driving Distance

Road route
147.53 mi
Kilometers
237.43 km
Drive Time
02h 24m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 24m.

Arrival Snapshot
Arrive in Taylor
Thu, Apr 16, 12:41 AM EDT
Return by in Belding
Thu, Apr 16, 3:05 AM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Belding
2026-04-15T22:16
Arrive Taylor
Thu, Apr 16, 12:41 AM EDT
Route Timing
02h 24m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:25 AM to 12:25 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
1:40 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Belding
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Williamston
MI

Human settlement in Ingham County, Michigan, United States of America

From Belding
73.7 mi
01h 12m
To Taylor
73.9 mi
01h 12m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
71°F
This Afternoon

Showers And Thunderstorms Likely

Starts
Wed, Apr 15 1:00 PM EDT
Wind
13 mph SW
Destination
74°F
Today

Showers And Thunderstorms

Starts
Wed, Apr 15 9:00 AM EDT
Wind
13 mph SW

Driving Route Map

The map below follows the saved road route between Belding and Taylor.

Turn-by-Turn Driving Directions

Step-by-step road directions between Belding and Taylor.

  1. 1

    Start on West Main Street

    15 m · 4 sec · West Main Street

  2. 2

    Turn right onto South Bridge Street

    3253 ft · 2 min · South Bridge Street

  3. 3

    Turn left onto East State Street

    1.3 km · 1 min · East State Street

  4. 4

    Continue on Belding Road

    7.2 mi · 10 min · Belding Road

  5. 5

    At the end of the road, turn right onto North State Road

    5.5 mi · 7 min · North State Road

  6. 6

    Continue on North State Street

    2057 ft · 59 sec · North State Street

  7. 7

    Turn left onto West Lincoln Avenue

    1060 ft · 40 sec · West Lincoln Avenue

  8. 8

    Turn right onto North Dexter Street

    1 mi · 2 min · North Dexter Street

  9. 9

    Continue on South State Road

    6.6 mi · 10 min · South State Road

  10. 10

    Take the ramp slight right toward I 96 East: Lansing

    1420 ft · 34 sec

  11. 11

    Merge slight left

    28.9 mi · 31 min

  12. 12

    Keep slight left to continue on I 96 East: Detroit

    66.9 mi · 1 hr 12 min

  13. 13

    Take the exit slight right toward I 96, I 275, M 5 North: Detroit, Toledo

    2832 ft · 35 sec

  14. 14

    Keep slight left

    2422 ft · 30 sec

  15. 15

    Continue straight

    18.6 mi · 20 min

  16. 16

    Take the exit slight right toward I 94: Chicago, Detroit

    1942 ft · 48 sec

  17. 17

    Keep slight left to continue on I 94 East: Metro Airport, Detroit

    1.5 km · 2 min

  18. 18

    Merge slight left onto Detroit Industrial Expressway

    5.7 mi · 6 min · Detroit Industrial Expressway

  19. 19

    Take the exit slight right toward Ecorse Road

    1783 ft · 44 sec

  20. 20

    Turn straight onto Ecorse Road

    1803 ft · 41 sec · Ecorse Road

  21. 21

    Turn right onto Beech-Daly Road

    98 m · 7 sec · Beech-Daly Road

  22. 22

    Continue on South Beech Daly Road

    1.5 km · 2 min · South Beech Daly Road

  23. 23

    Turn left onto Wick Road

    1.6 km · 2 min · Wick Road

  24. 24

    Arrive at your destination

    0 m · 1 sec · Wick Road

Car Route Details

A richer read on the saved driving route between Belding and Taylor.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
24 steps
8 turns on the saved route
Ramps & Exits
6
2 merges, 4 ramps or exits
Navigation Density
16.3 / 100 mi
Decision points by distance
Main Roads
I 96 East
96.1 mi · 65%
I 96
19.6 mi · 13%
Belding Road
7.19 mi · 5%
South State Road
6.56 mi · 4%
Detroit Industrial Expressway
5.67 mi · 4%
North State Road
5.46 mi · 4%
Longest Stretch

I 96 East

Keep slight left to continue on I 96 East: Detroit

66.9 mi · 01h 12m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 24m
Day trip friendly
Same-Day Return
04h 50m
Round-trip wheel time
Road vs Air
+31.7 mi
115.8 mi direct line
Halfway Stop
Williamston
01h 12m from Belding
Leave By
1:40 PM EDT
Morning start is best
Weather Watch

Showers And Thunderstorms Likely leaving Belding and Showers And Thunderstorms near Taylor.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Belding to Taylor?

The road trip is about 147.5 miles (237.4 km) and usually takes 02h 24m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Williamston is a useful midpoint, sitting about 73.7 miles from Belding and 73.9 miles from Taylor.

How much longer is the road route than the straight-line distance?

The direct path is about 115.8 miles (186.4 km), while the road route adds roughly 31.7 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 1:40 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $19.65 one way or $39.29 round trip. Estimated CO2 is about 46.3 kg one way.

What should you check before leaving?

Before you leave, expect Showers And Thunderstorms Likely around Belding and Showers And Thunderstorms near Taylor.

Stop Ideas Near Williamston

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Williamston, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Williamston.

RAIL

East Lansing station

18 mi away
1240 South Harrison Road
BUS

Owosso, MI

35 mi away
109 Comstock Street
RAIL

Durand Union Station

35 mi away
200 South Railroad St.
RAIL

Jackson station

50 mi away
501 E. Michigan Ave.

Flight Path Map

This map shows the direct air route between Belding and Taylor. Straight-line distance: 115.81 mi (186.38 km).

Belding

#1 Belding

City in Ionia County in the U.

Population5,738
Coordinates43.0978100, -85.2289100
Altitude237
CountryUnited States
Taylor

#2 Taylor

The most populous city in Wayne County, Michigan.

Population60,576
Coordinates42.2408700, -83.2696500
Altitude187
CountryUnited States
Start: West Main Street (-85.22891, 43.09782)
End: Wick Road (-83.269659, 42.240964)

Estimated Travel Time

Distance: 237 km by road

SpeedTime
30 mph (48.3 km/h)04h 54m
40 mph (64.37 km/h)03h 41m
50 mph (80.47 km/h)02h 57m
60 mph (96.56 km/h)02h 27m
70 mph (112.65 km/h)02h 06m
80 mph (129 km/h)01h 50m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
5.21 gal
19.71 L · about $19.65
Round trip
$39.29
10.42 gal · 39.42 L
Estimated CO2
46.3 kg one way
Round trip: 92.6 kg / 204 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $19.65 $39.29
Mid-grade $4.25 $22.16 $44.32
Premium $4.65 $24.25 $48.49
Diesel $5.30 $27.63 $55.27

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Michigan · Apr 16, 2026

There is no time difference between Belding and Taylor. The current time is 22:16:28.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.