How far is Belding, MI from Rochester Hills, MI?

The driving distance from Belding, MI to Rochester Hills, MI is about 143.4 miles (230.7 km), with a travel time of about 02h 19m by car.

  • The straight-line flight distance is about 109.5 miles (176.3 km).
  • For a round trip, plan for roughly 04h 38m of driving time before adding stops, traffic, or weather delays.
  • A comfortable departure window is usually 8:00 AM to 10:00 AM EDT.
Trip Tools

Reverse, save, or send this route

This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.

Reverse Route
Quick Snapshot
Road
143.36 mi
02h 19m
Flight
109.55 mi
176.3 km direct

This route works well as a day trip with time at the destination.

Learn Distance

Choose another destination from Belding.

Flight Distance

Direct air line
109.55 mi
Kilometers
176.3 km
Flight Time
00h 13m

Driving Distance

Road route
143.36 mi
Kilometers
230.72 km
Drive Time
02h 19m

Gas Cost Calculator

Leave and Arrive Planner

Pick a departure time to see your estimated arrival and same-day return window.

Drive time stays fixed at 02h 19m.

Arrival Snapshot
Arrive in Rochester Hills
Sat, May 2, 3:12 PM EDT
Return by in Belding
Sat, May 2, 5:31 PM EDT
Useful when you're deciding between a quick errand, a day trip, or a longer stop.
Leave Belding
2026-05-02T12:52
Arrive Rochester Hills
Sat, May 2, 3:12 PM EDT
Route Timing
02h 19m
One way by road
Best Departure Window
8:00 AM to 10:00 AM EDT
Aim for a morning departure
Arrive between
10:19 AM to 12:19 PM EDT

A morning start gives you useful time at the destination and keeps the return out of the late evening.

Leave by
1:52 PM EDT
Keeps a same-day return open with about 03h 00m at the destination.
Back in Belding
9:30 PM EDT
Morning start is best

You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.

Halfway Point

A useful midpoint for breaks, coffee, or meeting in the middle.

Mid-route stop
Morrice
MI

Settlement in Michigan

From Belding
71.6 mi
01h 09m
To Rochester Hills
71.8 mi
01h 09m

Route Weather Snapshot

Check the forecast at both ends before you head out.

Origin
51°F
Saturday

Mostly Sunny

Starts
Sat, May 2 6:00 AM EDT
Wind
5 to 16 mph NW
Destination
52°F
Saturday

Mostly Sunny

Starts
Sat, May 2 6:00 AM EDT
Wind
6 to 10 mph WNW

Driving Route Map

The map below follows the saved road route between Belding and Rochester Hills.

Turn-by-Turn Driving Directions

Step-by-step road directions between Belding and Rochester Hills.

  1. 1

    Start on West Main Street

    15 m · 4 sec · West Main Street

  2. 2

    Turn right onto South Bridge Street

    3253 ft · 2 min · South Bridge Street

  3. 3

    Turn left onto East State Street

    1.3 km · 1 min · East State Street

  4. 4

    Continue on Belding Road

    7.2 mi · 10 min · Belding Road

  5. 5

    At the end of the road, turn right onto North State Road

    5.5 mi · 7 min · North State Road

  6. 6

    Continue on North State Street

    2057 ft · 59 sec · North State Street

  7. 7

    Turn left onto West Lincoln Avenue

    1060 ft · 40 sec · West Lincoln Avenue

  8. 8

    Turn right onto North Dexter Street

    1 mi · 2 min · North Dexter Street

  9. 9

    Continue on South State Road

    6.6 mi · 10 min · South State Road

  10. 10

    Take the ramp slight right toward I 96 East: Lansing

    1420 ft · 34 sec

  11. 11

    Merge slight left

    21.2 mi · 23 min

  12. 12

    Take the exit slight right toward I 69 East: Flint

    2.5 mi · 3 min

  13. 13

    Merge slight left

    51.5 mi · 53 min

  14. 14

    Take the exit slight right toward I 75, US 23: Saginaw, Detroit

    1999 ft · 49 sec

  15. 15

    Keep slight right to continue on I 75 South, US 23 South: Detroit

    1919 ft · 47 sec

  16. 16

    Merge slight left

    1.9 mi · 2 min

  17. 17

    Keep slight left

    36.8 mi · 39 min

  18. 18

    Take the exit slight right toward M 59 East: Utica

    1392 ft · 47 sec

  19. 19

    Merge slight left

    3.2 mi · 3 min

  20. 20

    Take the exit slight right toward Crooks Road

    1963 ft · 55 sec

  21. 21

    Turn left onto Crooks Road

    3230 ft · 1 min · Crooks Road

  22. 22

    Turn right onto West Hamlin Road

    1 mi · 2 min · West Hamlin Road

  23. 23

    Enter the roundabout and take exit 3 toward South Livernois Road

    65 m · 4 sec · South Livernois Road

  24. 24

    Exit the roundabout onto South Livernois Road

    1428 ft · 29 sec · South Livernois Road

  25. 25

    Turn right onto Dressler Lane

    60 m · 13 sec · Dressler Lane

  26. 26

    Turn left onto Downhill Lane

    115 m · 22 sec · Downhill Lane

  27. 27

    Turn left onto Dickson Lane

    1164 ft · 51 sec · Dickson Lane

  28. 28

    Arrive at your destination

    0 m · 1 sec · Dickson Lane

Car Route Details

A richer read on the saved driving route between Belding and Rochester Hills.

OSRM road route
Drive Character

Highway-focused drive

Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.

Directions
28 steps
12 turns on the saved route
Ramps & Exits
11
4 merges, 7 ramps or exits
Navigation Density
19.5 / 100 mi
Decision points by distance
Main Roads
I 69 East
54.1 mi · 38%
I 75 South
39.1 mi · 27%
I 96 East
21.5 mi · 15%
Belding Road
7.19 mi · 5%
South State Road
6.56 mi · 5%
North State Road
5.46 mi · 4%
Longest Stretch

I 69 East

Merge slight left

51.5 mi · 00h 53m

Route Summary

A quick read on whether this route feels easy, ambitious, or worth planning around.

Trip Read

A comfortable day-trip route

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

Drive Time
02h 19m
Day trip friendly
Same-Day Return
04h 38m
Round-trip wheel time
Road vs Air
+33.9 mi
109.5 mi direct line
Halfway Stop
Morrice
01h 09m from Belding
Leave By
1:52 PM EDT
Morning start is best
Weather Watch

Mostly Sunny leaving Belding and Mostly Sunny near Rochester Hills.

Trip Questions

Direct answers travelers usually want before committing to the drive.

How long does it take to drive from Belding to Rochester Hills?

The road trip is about 143.4 miles (230.7 km) and usually takes 02h 19m in normal driving conditions.

Is this a same-day trip or an overnight route?

This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.

What is the halfway point on this route?

Morrice is a useful midpoint, sitting about 71.6 miles from Belding and 71.8 miles from Rochester Hills.

How much longer is the road route than the straight-line distance?

The direct path is about 109.5 miles (176.3 km), while the road route adds roughly 33.9 extra miles because roads do not follow the straight air line.

When is the best time to leave for this route?

A good departure window is usually 8:00 AM to 10:00 AM EDT. If you want a more comfortable same-day return, try to leave by 1:52 PM EDT.

How much will gas cost for this route?

Using about 28.3 MPG, regular gas is estimated at $19.08 one way or $38.16 round trip. Estimated CO2 is about 45 kg one way.

What should you check before leaving?

Before you leave, expect Mostly Sunny around Belding and Mostly Sunny near Rochester Hills.

Stop Ideas Near Morrice

Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.

Mid-route Guidance
Local place coverage is thin around Morrice, so nearby transit and meeting points are shown instead.
Reviewed stop coverage is still thin around this midpoint, so practical transit waypoints are shown on the right.

Transit and Meeting Points

Useful pickup, handoff, or rendezvous points close to Morrice.

BUS

Owosso, MI

18 mi away
109 Comstock Street
RAIL

Durand Union Station

18 mi away
200 South Railroad St.
RAIL

East Lansing station

29 mi away
1240 South Harrison Road
RAIL

Flint station

47 mi away
1407 South Dort Highway

Flight Path Map

This map shows the direct air route between Belding and Rochester Hills. Straight-line distance: 109.55 mi (176.3 km).

Belding

#1 Belding

City in Ionia County in the U.

Population5,738
Coordinates43.0978100, -85.2289100
Altitude237
CountryUnited States
Rochester Hills

#2 Rochester Hills

A city in Oakland County, Michigan.

Population74,111
Coordinates42.6583700, -83.1499300
Altitude251
CountryUnited States
Start: West Main Street (-85.22891, 43.09782)
End: Dickson Lane (-83.150084, 42.658638)

Estimated Travel Time

Distance: 231 km by road

SpeedTime
30 mph (48.3 km/h)04h 46m
40 mph (64.37 km/h)03h 35m
50 mph (80.47 km/h)02h 52m
60 mph (96.56 km/h)02h 23m
70 mph (112.65 km/h)02h 02m
80 mph (129 km/h)01h 47m

Fuel, Round Trip and CO2

Estimated fuel cost and emissions for this route.

One-way fuel
5.06 gal
19.15 L · about $19.08
Round trip
$38.16
10.12 gal · 38.3 L
Estimated CO2
45 kg one way
Round trip: 89.9 kg / 198 lb CO2, using regular gasoline.
Fuel$/galOne wayRound trip
Regular gas $3.77 $19.08 $38.16
Mid-grade $4.25 $21.52 $43.04
Premium $4.65 $23.55 $47.10
Diesel $5.30 $26.84 $53.68

Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.

Prices in Michigan · May 02, 2026

There is no time difference between Belding and Rochester Hills. The current time is 12:52:47.

Distance to Other Cities

Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.

How did we calculate? Place names are translated into coordinates. The Haversine formula calculates straight-line distance; driving distance uses road network data.