How far is Bedford Heights, OH from Strongsville, OH?
The driving distance from Bedford Heights, OH to Strongsville, OH is about 24.9 miles (40.1 km), with a travel time of about 00h 30m by car.
- The straight-line flight distance is about 17.5 miles (28.1 km).
- For a round trip, plan for roughly 01h 00m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 30m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
This departure sits inside the recommended comfort window for the route.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Borough of New York City, New York, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Mostly Sunny
Driving Route Map
The map below follows the saved road route between Bedford Heights and Strongsville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Bedford Heights and Strongsville.
-
1
Start on Northfield Road
2381 ft · 1 min · Northfield Road
-
2
Take the ramp left toward I 480 West: Cleveland, Toledo
1597 ft · 39 sec
-
3
Merge slight left onto Outerbelt South Freeway
4.6 mi · 6 min · Outerbelt South Freeway
-
4
Keep slight right to continue on Outerbelt South Freeway
10.1 mi · 13 min · Outerbelt South Freeway
-
5
Take the exit slight right toward I 71 South: Columbus
1.3 mi · 3 min
-
6
Merge slight left
6.5 mi · 8 min
-
7
Take the exit slight right toward SR 82 West: Howe Road, Royalton Road
2074 ft · 53 sec
-
8
Turn right onto Royalton Road
1.2 mi · 3 min · Royalton Road
-
9
Arrive at your destination
0 m · 1 sec · Royalton Road
Car Route Details
A richer read on the saved driving route between Bedford Heights and Strongsville.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
Outerbelt South Freeway
Keep slight right to continue on Outerbelt South Freeway
10.1 mi · 00h 13m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Mostly Cloudy leaving Bedford Heights and Mostly Sunny near Strongsville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Bedford Heights to Strongsville?
The road trip is about 24.9 miles (40.1 km) and usually takes 00h 30m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Brooklyn is a useful midpoint, sitting about 12.4 miles from Bedford Heights and 12.5 miles from Strongsville.
How much longer is the road route than the straight-line distance?
The direct path is about 17.5 miles (28.1 km), while the road route adds roughly 7.4 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:30 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $3.37 one way or $6.74 round trip. Estimated CO2 is about 7.8 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Bedford Heights and Mostly Sunny near Strongsville.
Stop Ideas Near Brooklyn
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Cleveland City Hall
Parma City Hall
Brunswick City Hall Recreation
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Brooklyn.
Cleveland Lakefront station
Elyria
Alliance
Sandusky
Flight Path Map
This map shows the direct air route between Bedford Heights and Strongsville. Straight-line distance: 17.49 mi (28.14 km).
#1 Bedford Heights
City in Cuyahoga County, Ohio, United States
| Population | 10,397 |
| Coordinates | 41.4170000, -81.5273400 |
| Altitude | 317 |
| Country | United States |
#2 Strongsville
A city in Cuyahoga County, Ohio.
| Population | 44,481 |
| Coordinates | 41.3145000, -81.8356900 |
| Altitude | 284 |
| Country | United States |
End: Royalton Road (-81.835537, 41.314183)
Estimated Travel Time
Distance: 40 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 49m |
| 40 mph (64.37 km/h) | 00h 37m |
| 50 mph (80.47 km/h) | 00h 29m |
| 60 mph (96.56 km/h) | 00h 24m |
| 70 mph (112.65 km/h) | 00h 21m |
| 80 mph (129 km/h) | 00h 18m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.83 | $3.37 | $6.74 |
| Mid-grade | $4.38 | $3.86 | $7.71 |
| Premium | $4.93 | $4.34 | $8.67 |
| Diesel | $6.07 | $5.34 | $10.68 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Ohio · Oct 15, 2026