How far is Beaver Dam, KY from Hopkinsville, KY?
The driving distance from Beaver Dam, KY to Hopkinsville, KY is about 65.9 miles (106.1 km), with a travel time of about 01h 02m by car.
- The straight-line flight distance is about 50.2 miles (80.8 km).
- For a round trip, plan for roughly 02h 04m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 02m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
City in Hopkins County, Kentucky, United States of America
Route Weather Snapshot
Check the forecast at both ends before you head out.
Showers And Thunderstorms Likely
Showers And Thunderstorms Likely
Driving Route Map
The map below follows the saved road route between Beaver Dam and Hopkinsville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Beaver Dam and Hopkinsville.
-
1
Start on South Main Street
3082 ft · 52 sec · South Main Street
-
2
Continue on US Highway 231
2.6 mi · 4 min · US Highway 231
-
3
Take the ramp right
1509 ft · 37 sec
-
4
Merge slight left onto Western Kentucky Parkway
36 mi · 39 min · Western Kentucky Parkway
-
5
Take the exit slight right toward I 169 South: Hopkinsville
1850 ft · 45 sec
-
6
Merge slight left
86 m · 3 sec
-
7
Continue straight
24.7 mi · 26 min
-
8
Take the exit slight right toward US 68, KY 80
1230 ft · 30 sec
-
9
Keep slight right to continue on US 68, KY 80
56 m · 5 sec
-
10
Turn straight onto McLean Avenue
1718 ft · 30 sec · McLean Avenue
-
11
Turn right onto East 9th Street
1 km · 1 min · East 9th Street
-
12
Turn left onto Bethel Street
92 m · 13 sec · Bethel Street
-
13
Arrive at your destination
0 m · 1 sec · Bethel Street
Car Route Details
A richer read on the saved driving route between Beaver Dam and Hopkinsville.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
Western Kentucky Parkway
Merge slight left onto Western Kentucky Parkway
36 mi · 00h 39m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Showers And Thunderstorms Likely leaving Beaver Dam and Showers And Thunderstorms Likely near Hopkinsville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Beaver Dam to Hopkinsville?
The road trip is about 65.9 miles (106.1 km) and usually takes 01h 02m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
White Plains is a useful midpoint, sitting about 32.9 miles from Beaver Dam and 33 miles from Hopkinsville.
How much longer is the road route than the straight-line distance?
The direct path is about 50.2 miles (80.8 km), while the road route adds roughly 15.7 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 4:26 PM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $8.79 one way or $17.57 round trip. Estimated CO2 is about 20.7 kg one way.
What should you check before leaving?
Before you leave, expect Showers And Thunderstorms Likely around Beaver Dam and Showers And Thunderstorms Likely near Hopkinsville.
Stop Ideas Near White Plains
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to White Plains.
Madisonville, KY
Clarksville, TN
Evansville, IN
Paducah, KY
Flight Path Map
This map shows the direct air route between Beaver Dam and Hopkinsville. Straight-line distance: 50.23 mi (80.83 km).
#1 Beaver Dam
City in Kentucky, USA
| Population | 3,553 |
| Coordinates | 37.4019900, -86.8758300 |
| Altitude | 125 |
| Country | United States |
#2 Hopkinsville
City in Christian County, Kentucky, United States
| Population | 30,899 |
| Coordinates | 36.8656100, -87.4911700 |
| Altitude | 161 |
| Country | United States |
End: Bethel Street (-87.490348, 36.865249)
Estimated Travel Time
Distance: 106 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 02h 11m |
| 40 mph (64.37 km/h) | 01h 38m |
| 50 mph (80.47 km/h) | 01h 19m |
| 60 mph (96.56 km/h) | 01h 05m |
| 70 mph (112.65 km/h) | 00h 56m |
| 80 mph (129 km/h) | 00h 49m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.77 | $8.79 | $17.57 |
| Mid-grade | $4.25 | $9.91 | $19.82 |
| Premium | $4.65 | $10.84 | $21.69 |
| Diesel | $5.30 | $12.36 | $24.72 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Kentucky · Apr 18, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.