How far is Barre, VT from Danville, VT?
The driving distance from Barre, VT to Danville, VT is about 28.1 miles (45.3 km), with a travel time of about 00h 38m by car.
- The straight-line flight distance is about 23.2 miles (37.4 km).
- For a round trip, plan for roughly 01h 16m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 7:00 AM to 7:00 PM EDT.
Reverse, save, or send this route
This is an easy same-day return drive. Copy the route link, send it to another device, or print a clean version before you head out.
This is an easy same-day return drive.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 00h 38m.
This is a short drive, so your comfort window is wide. Traffic and current weather matter more than the clock.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Town in Washington County, Vermont, United States
Route Weather Snapshot
Check the forecast at both ends before you head out.
Partly Sunny
Partly Sunny
Driving Route Map
The map below follows the saved road route between Barre and Danville.
Turn-by-Turn Driving Directions
Step-by-step road directions between Barre and Danville.
-
1
Start on the route
53 m · 18 sec
-
2
Turn left onto Prospect Street
57 m · 10 sec · Prospect Street
-
3
Turn left onto North Main Street
85 m · 11 sec · North Main Street
-
4
Turn left onto North Main Street
1037 ft · 38 sec · North Main Street
-
5
Turn right onto Merchant Street
1.3 km · 2 min · Merchant Street
-
6
Turn straight onto Maple Avenue
1018 ft · 35 sec · Maple Avenue
-
7
Continue on East Montpelier Road
1.7 mi · 3 min · East Montpelier Road
-
8
Continue on Vermont Route 14 South
1.6 mi · 2 min · Vermont Route 14 South
-
9
Continue on Vermont Route 14 South
1.5 km · 2 min · Vermont Route 14 South
-
10
At the end of the road, turn right onto U.S. Route 2
2.9 mi · 5 min · U.S. Route 2
-
11
Continue on High Street
3040 ft · 39 sec · High Street
-
12
Continue on School Street
997 ft · 13 sec · School Street
-
13
Continue on U.S. Route 2
18.9 mi · 21 min · U.S. Route 2
-
14
Turn right onto Peacham Road
99 m · 14 sec · Peacham Road
-
15
Turn left onto Park Street
56 m · 11 sec · Park Street
-
16
Turn left onto Brainerd Street
61 m · 9 sec · Brainerd Street
-
17
Arrive at your destination
0 m · 1 sec · Brainerd Street
Car Route Details
A richer read on the saved driving route between Barre and Danville.
Turn-heavy local drive
The route has frequent decision points for its length, so lane choice and turn timing will matter more than cruising speed.
U.S. Route 2
Continue on U.S. Route 2
18.9 mi · 00h 21m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A short regional drive
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
Partly Sunny leaving Barre and Partly Sunny near Danville.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Barre to Danville?
The road trip is about 28.1 miles (45.3 km) and usually takes 00h 38m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route is short enough to handle as a quick errand, commute, or easy same-day return without much planning overhead.
What is the halfway point on this route?
Marshfield is a useful midpoint, sitting about 14 miles from Barre and 14.1 miles from Danville.
How much longer is the road route than the straight-line distance?
The direct path is about 23.2 miles (37.4 km), while the road route adds roughly 4.9 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 7:00 AM to 7:00 PM EDT. If you want a more comfortable same-day return, try to leave by 7:14 PM EDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $3.91 one way or $7.81 round trip. Estimated CO2 is about 8.8 kg one way.
What should you check before leaving?
Before you leave, expect Partly Sunny around Barre and Partly Sunny near Danville.
Stop Ideas Near Marshfield
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Marshfield.
Montpelier station
Waterbury
Littleton, New Hampshire
Randolph station
Flight Path Map
This map shows the direct air route between Barre and Danville. Straight-line distance: 23.25 mi (37.42 km).
#1 Barre
City in Washington County, Vermont, U.
| Population | 7,741 |
| Coordinates | 44.1970100, -72.5020500 |
| Altitude | 194 |
| Country | United States |
#2 Danville
Town in Vermont, United States
| Population | 2,105 |
| Coordinates | 44.4111700, -72.1392600 |
| Altitude | 430 |
| Country | United States |
End: Danville (-72.13926, 44.41117)
Estimated Travel Time
Distance: 45 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 00h 56m |
| 40 mph (64.37 km/h) | 00h 42m |
| 50 mph (80.47 km/h) | 00h 33m |
| 60 mph (96.56 km/h) | 00h 28m |
| 70 mph (112.65 km/h) | 00h 24m |
| 80 mph (129 km/h) | 00h 21m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.95 | $3.91 | $7.81 |
| Mid-grade | $4.46 | $4.41 | $8.82 |
| Premium | $4.86 | $4.81 | $9.62 |
| Diesel | $6.00 | $5.94 | $11.87 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Vermont · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.