How far is Arlington, TX from Tool, TX?
The driving distance from Arlington, TX to Tool, TX is about 78.2 miles (125.9 km), with a travel time of about 01h 35m by car.
- The straight-line flight distance is about 63.5 miles (102.2 km).
- For a round trip, plan for roughly 03h 11m of driving time before adding stops, traffic, or weather delays.
- A comfortable departure window is usually 8:00 AM to 10:00 AM CDT.
Reverse, save, or send this route
This route works well as a day trip with time at the destination. Copy the route link, send it to another device, or print a clean version before you head out.
This route works well as a day trip with time at the destination.
Flight Distance
Driving Distance
Gas Cost Calculator
Leave and Arrive Planner
Pick a departure time to see your estimated arrival and same-day return window.
Drive time stays fixed at 01h 35m.
A morning start gives you useful time at the destination and keeps the return out of the late evening.
You are leaving earlier than the recommended window, which gives you extra margin for breaks and traffic.
Halfway Point
A useful midpoint for breaks, coffee, or meeting in the middle.
Route Weather Snapshot
Check the forecast at both ends before you head out.
Mostly Cloudy
Mostly Cloudy
Driving Route Map
The map below follows the saved road route between Arlington and Tool.
Turn-by-Turn Driving Directions
Step-by-step road directions between Arlington and Tool.
-
1
Start on West Abram Street
28 m · 8 sec · West Abram Street
-
2
Continue on West Abram Street
1 km · 1 min · West Abram Street
-
3
Turn right
47 m · 7 sec
-
4
Turn slight right onto South Collins Street
4.1 mi · 8 min · South Collins Street
-
5
Turn left onto East Interstate 20
1358 ft · 29 sec · East Interstate 20
-
6
Take the ramp slight left toward I 20 East
1207 ft · 30 sec
-
7
Merge slight left onto Ronald Reagan Memorial Highway
5.9 mi · 6 min · Ronald Reagan Memorial Highway
-
8
Continue on Lyndon B Johnson Freeway
21.4 mi · 23 min · Lyndon B Johnson Freeway
-
9
Take the exit slight right toward US 175 East: Kaufman
1642 ft · 40 sec
-
10
Merge slight left onto C F Hawn Freeway
30.5 mi · 33 min · C F Hawn Freeway
-
11
Turn right
1.7 mi · 3 min
-
12
Turn straight
103 m · 12 sec
-
13
Turn slight right onto South State Highway 274
9.7 mi · 14 min · South State Highway 274
-
14
Continue on North Tool Drive
3.3 mi · 5 min · North Tool Drive
-
15
Arrive at your destination
0 m · 1 sec · South Tool Drive
Car Route Details
A richer read on the saved driving route between Arlington and Tool.
Highway-focused drive
Most of the mileage stays on named highways, so the important moments are ramps, exits, merges, and the final local approach.
C F Hawn Freeway
Merge slight left onto C F Hawn Freeway
30.5 mi · 00h 33m
Route Summary
A quick read on whether this route feels easy, ambitious, or worth planning around.
A comfortable day-trip route
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
Mostly Cloudy leaving Arlington and Mostly Cloudy near Tool.
Trip Questions
Direct answers travelers usually want before committing to the drive.
How long does it take to drive from Arlington to Tool?
The road trip is about 78.2 miles (125.9 km) and usually takes 01h 35m in normal driving conditions.
Is this a same-day trip or an overnight route?
This route works well as a day trip. You can leave in the morning, spend meaningful time at the destination, and still return the same day.
What is the halfway point on this route?
Seagoville is a useful midpoint, sitting about 39.1 miles from Arlington and 39.1 miles from Tool.
How much longer is the road route than the straight-line distance?
The direct path is about 63.5 miles (102.2 km), while the road route adds roughly 14.7 extra miles because roads do not follow the straight air line.
When is the best time to leave for this route?
A good departure window is usually 8:00 AM to 10:00 AM CDT. If you want a more comfortable same-day return, try to leave by 3:18 PM CDT.
How much will gas cost for this route?
Using about 28.3 MPG, regular gas is estimated at $10.43 one way or $20.86 round trip. Estimated CO2 is about 24.5 kg one way.
What should you check before leaving?
Before you leave, expect Mostly Cloudy around Arlington and Mostly Cloudy near Tool.
Stop Ideas Near Seagoville
Useful break, food, and waypoint ideas within about 15 miles of the route midpoint.
Transit and Meeting Points
Useful pickup, handoff, or rendezvous points close to Seagoville.
Mesquite, TX
Union Station
Dallas, TX
Fort Worth Central Station
Flight Path Map
This map shows the direct air route between Arlington and Tool. Straight-line distance: 63.49 mi (102.18 km).
#1 Arlington
The third most populous city in Texas and the center of the Dallas-Fort Worth metropolitan area.
| Population | 398,864 |
| Coordinates | 32.7356900, -97.1080700 |
| Altitude | 184 |
| Country | United States |
#2 Tool
City in Henderson County, Texas, United States
| Population | 2,335 |
| Coordinates | 32.2679200, -96.1702500 |
| Altitude | 104 |
| Country | United States |
End: Tool (-96.17025, 32.26792)
Estimated Travel Time
Distance: 126 km by road
| Speed | Time |
|---|---|
| 30 mph (48.3 km/h) | 02h 36m |
| 40 mph (64.37 km/h) | 01h 57m |
| 50 mph (80.47 km/h) | 01h 33m |
| 60 mph (96.56 km/h) | 01h 18m |
| 70 mph (112.65 km/h) | 01h 07m |
| 80 mph (129 km/h) | 00h 58m |
Fuel, Round Trip and CO2
Estimated fuel cost and emissions for this route.
| Fuel | $/gal | One way | Round trip |
|---|---|---|---|
| Regular gas | $3.78 | $10.43 | $20.86 |
| Mid-grade | $4.25 | $11.74 | $23.47 |
| Premium | $4.59 | $12.67 | $25.34 |
| Diesel | $3.99 | $11.02 | $22.04 |
Assumes 8.3 L/100 km (about 28.3 MPG). CO2 is an estimate and varies by vehicle, fuel blend, traffic, and terrain.
Prices in Texas · Apr 23, 2026
Distance to Other Cities
Planning a road trip? See the full trip guide on Trip.ovh — stops, fuel costs, weather, and departure timing.